Search the data

BODC Cruise Metadata Report for RRS James Cook (740H) cruise JC114

Introduction

This report collates information from the BODC cruise inventory and oceanographic databases. It presents

Cruise Inventory Information

Long name RRS James Cook (740H) cruise JC114
Short name JC114
Objectives and Narrative The OSCAR research programme in the Panama Basin consisted of three cruises on the RRS James Cook and a single cruise on the RV Sonne. The project aims to investigate the cooling of young oceanic crust by heat and mass flux between the solid Earth and the hydrosphere. Close to a mid-ocean ridge, rapid cooling is dominated by hydrothermal circulation of seawater through the porous and fractured basalt crust. The primary objective of this interdisciplinary project is to investigate the effects of this heat loss and hydrothermal circulation on both the solid Earth and the ocean. The data collected as part of the OSCAR project will be used to derive an integrated circulation model, constrained by geophysical, geological and physical oceanography data that will include flux through the seabed.

The primary objective of JC114 was to collect geophysical data at, and in the vicinity of, the Costa Rica Rift (CRR) (North Grid, NG) and Ocean Drilling Programme dill-hole 504B (South Grid, SG), including both high and low resolution normal incidence multichannel seismic reflection data, wide-angle seismic refraction using both ocean-bottom seismographs and the synthetic aperture (SAP) approach, potential field data (gravity and magnetics), swath bathymetry depth and backscatter data, and shallow sub-bottom profiler data. Then use the data to investigate the nature of the ocean layer 2a/2b boundary; the fluid flow in dykes both on and off the spreading axis; and the location and role of faults within layers 1 and 2.

The programme collected seismic data throughout the study area and, in particular, within two grids located at the CRR and 504B drill-hole, connected by flow-line profiles. In addition, the cruise collected seismic data over the Ecuador Rift and swath bathymetry along the major fracture zones that segment the spreading ridge in this area.
Ship RRS James Cook
Departure Port Caldera, Costa Rica
Departure Date 2015-01-22
Arrival Port Balboa, Panama
Arrival Date 2015-03-06
Principal Scientist(s) Richard W Hobbs (University of Durham, Department of Earth Sciences)
Responsible Organisation National Oceanography Centre, Southampton
Associated Project(s)
IHB Sea Areas Visited North East Pacific Ocean (limit 180W)
Marsden Squares Visited 9
Work Area Description Panama Basin (Costa Rica Ridge/ODP-504B/Sandra Ridge/Carnegie Ridge)
Unable to lookup cruise bounds at this time
Work Area Bounding Polygon
Southern Limit unknown
Northern Limit unknown
Western Limit unknown
Eastern Limit unknown

Cruise Inventory Datasets

Physical oceanography  
Current profiler (eg ADCP) Quantity: activity duration in days = 17
Description: Both hull mounted 75 kHz and 150 kHz ADCP systems were run during the cruise.  
Other physical oceanographic measurements Quantity: activity duration in days = 17
Description: The WaMos wave radar was run throughout the cruise.  
Surface measurements underway (T,S) Quantity: activity duration in days = 17
Description: The Surfmet system was run throughout the cruise.  
Meteorology  
Routine standard measurements Quantity: activity duration in days = 17
Description: The Surfmet system was run throughout the cruise.  
Geology and geophysics  
Geophysical measurements made at depth Quantity: number of profiles = 2
Description: Sound velocity profiles  
Gravity measurements Quantity: activity duration in days = 17
Description: Gravity ? continuous data logging. Base station ties where made at Caldera and Balboa.  
Magnetic measurements Quantity: activity duration in days = 17
Description: Magnetics ? data logged along all MCS profiles.  
Multi-beam echosounding Quantity: activity duration in days = 17
Description: The EM120 multi-beam echo sounder was run throughout the cruise. There are breaks in the data due to the acoustic instrumentation being isolated during OBS deployment and recovery.  
Multichannel seismic reflection Quantity: number of profiles = 30
Description: Multichannel reflection profiles. Dual airgun source (GI & BOLT) fired flip-flop. 4500m hydrophone array (360 channel).  
Multichannel seismic reflection Quantity: number of profiles = 1
Description: Multichannel reflection profiles. Single airgun source (BOLT); 4500m hydrophone array (360 channel)  
Multichannel seismic reflection Quantity: number of profiles = 1
Description: Multichannel reflection profiles. Single airgun source (GI); 4500m hydrophone array (360 channel)  
Multichannel seismic reflection Quantity: number of profiles = 5
Description: Multichannel reflection profiles. Triple airgun source (GI & BOLT + G-gun from SONNE) fired flip-flap-flop. 4500m hydrophone array (360 channel).  
Multichannel seismic reflection Quantity: number of profiles = 11
Description: Multichannel reflection profiles. Dual airgun source (GI & BOLT) fired flip-flop. 1500m hydrophone array (120 channel).  
Seismic refraction Quantity: number of deployments = 25
Description: Ocean-Bottom Seismograph. 4-component (hydrophone + 3 geophones) to measure seismic energy from surface air-gun shots along multichannel seismic lines at North Grid site.  
Seismic refraction Quantity: number of deployments = 25
Description: Ocean-Bottom Seismograph. 4-component (hydrophone + 3 geophones) to measure seismic energy from surface air-gun shots along multichannel seismic lines at South Grid site.  
Seismic refraction Quantity: number of deployments = 35
Description: Ocean-Bottom Seismograph. 4-component (hydrophone + 3 geophones) to measure seismic energy from surface air-gun shots. Synthetic Aperture Profile.  
Seismic refraction Quantity: number of deployments = 4
Description: Passive array. 4-component (hydrophone + 3 geophones) to measure natural seismicity.  
Seismic refraction Quantity: number of deployments = 2
Description: Vertical hydrophone array. 4-component (4 hydrophone) to measure seismic energy from surface air-gun shots along multichannel seismic lines.  
Single channel seismic reflection Quantity: activity duration in days = 17
Description: The SBP120 Sub Bottom Profiler was run throughout the cruise. There are breaks in the data due to the acoustic instrumentation being isolated during OBS deployment and recovery.  
Single-beam echosounding Quantity: activity duration in days = 17
Description: The EA600 single beam echo sounder was run throughout the cruise. There are breaks in the data due to the acoustic instrumentation being isolated during OBS deployment and recovery.  

Cruise Inventory Mooring/Buoy Operations

No information on datasets is currently available

Summary of BODC Data Holdings for the Cruise

National Oceanographic Database

No data currently held for this cruise in the BODC National Oceanographic Database

Project Database

No data currently held for this cruise in the BODC Project Database

References

Track Charts

Track Chart

Reports

Cruise Report