Metadata Report for BODC Series Reference Number 1718155

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."

Narrative Documents

Instrument Description

The LADCP data were collected using the instrumentation detailed below:

The LADCP system consisted of two ADCPs (one up-looker and one down-looker), a battery and interconnection cables mounted on on a Sea-Bird 9 11 plus CTD frame.

A high-power Workhorse ADCP from the LDEO stable was used as the downlooker throughout the entire cruise. The up-looker was one of two NOC standard Workhorses. On station 42 beam 4 became weak and on casts 43, 44 and 45 beam 4 was broken. The instrument was replaced on cast 46.

The configuration of the instruments remained unchanged during the first section in particular 25 x 8m bins, were used.

Teledyne RDI's Workhorse Monitor ADCP

The Workhorse Monitor acoustic doppler current profler (Teledyne RD Instruments) is a long-range and long-term self contained ADCP. It has a patented four beam signal (300, 600 or 1200 kHz) and a standard depth rating of 200m or 600m. It operates effectively between temperatures of -5°C and 45°C and has a velocity accuracy of ±1% ±5mm/s.

BODC Processing

LDEO processed data were provided by the originator in Matlab and ASCII formats. The LDEO processed data in ASCII format were converted into BODC internal format after discussion with the originator. All data provided were from the downward looking RDI 300 kHz Workhorse ADCP which was in operation at the time. The following table shows how the variables within the ASCII files were mapped to appropriate BODC parameter codes:

All reformatted data were visualised using the in-house Edserplo software. Suspect and missing data were marked by adding an appropriate quality control flag.

Note that the more complex LDEO processed data are available on request in Matlab format.

Originator's Data Processing

Sampling Strategy

A total of 52 LADCP profiles were obtained. Profiles were collected at each of the CTD stations except for CTD station 10. LADCP profiles were not obtained on stations 2 and 16 where the CTDs were aborted.

Data processing

Preliminary shipboard processing of the LADCP data was carried out with the LDEO IX_6 LADCP processing software. Processing included preliminary 1Hz CTD data and navigation data obtained from the Seatex system. The Glonass navigation stream was used instead for cast 27 due to problems with the Seatex data.

On station VMADCP data were extracted from the preliminary processed data. These data were averaged for all samples acquired during each CTD station and a file was created showing the mean currents standard deviation and number of samples in each depth bin. VMADCP was used to verify the LADCP data and not used in the processing. Bottom tracking was included in the processing of the LADCP profiles except for 3, 4, 6, 7, 9, 11, 14, 18, 19, 20, 21, 23, 24, 25, 27, 28, 30, 34, 35, 38 and 39.

Please refer to Thurnherr (2014) and the cruise report for a more detailed processing methodology. However, please be aware that this processing guide is for software versions IX.7 to IX.10 only, and changes have been made between versions which have the potential for significantly changing the solutions.

References

Thurnherr, A. M., 2014. How To Process LADCP Data With the LDEO Software, Versions IX.7 - IX.10.

Project Information

Diapycnal and Isopycnal Mixing Experiment in the Southern Ocean (DIMES) project document

DIMES is a US/UK field program aimed at measuring diapycnal and isopycnal mixing in the Southern Ocean, along the tilting isopycnals of the Antarctic Circumpolar Current.

The Meridional Overturning Circulation (MOC) of the ocean is a critical regulator of the Earth's climate processes. Climate models are highly sensitive to the representation of mixing processes in the southern limb of the MOC, within the Southern Ocean, although the lack of extensive in situ observations of Southern Ocean mixing processes has made evaluation of mixing somewhat difficult. Theories and models of the Southern Ocean circulation have been built on the premise of adiabatic flow in the ocean interior, with diabatic processes confined to the upper-ocean mixed layer. Interior diapycnal mixing has often been assumed to be small, but a few recent studies have suggested that diapycnal mixing might be large in some locations, particularly over rough bathymetry. Depending on its extent, this interior diapycnal mixing could significantly affect the overall energetics and property balances for the Southern Ocean and in turn for the global ocean. The goals of DIMES are to obtain measurements that will help us quantify both along-isopycnal eddy-driven mixing and cross-isopycnal interior mixing.

DIMES includes tracer release, isopycnal following RAFOS floats, microstructure measurements, shearmeter floats, EM-APEX floats, a mooring array in Drake Passage, hydrographic observations, inverse modeling, and analysis of altimetry and numerical model output.

DIMES is sponsored by the National Science Foundation (U.S.), Natural Environment Research Council (U.K) and British Antarctic Survey (U.K.)

For more information please see the official project website at DIMES

Data Activity or Cruise Information

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

Fixed Station Information

World Ocean Circulation Experiment (WOCE) Southern Repeat Section 1B - Falkland Islands to Elephant Island

WOCE Southern Repeat Section 1B is a section across Drake Passage in the South Atlantic Ocean. The nominal end points of the section (to date) are at 52° 55.74' S, 58° 00.00' W (at the south of the Falkland Islands) and 61° 03.05' S, 54° 33.10' W (off Elephant Island at the north end of the Antarctic Peninsula).

The section was first occupied by the R/V Polarstern in 1992 (Gersonde, 1993). The first UK occupation of SR1b followed on RRS Discovery later the same year. The National Oceanography Centre, Southampton (formerly known as Southampton Oceanography Centre), in collaboration with the British Antarctic Survey, have occupied the section most years since 1993 on the RRS James Clark Ross. Additionally, there were three Spanish occupations on R/V Hespérides in February 1995, 1996 and 1998 (Garcia et al., 2002). A Drake Passage summary report for RRS James Clark Ross cruises between 1993 - 2000 has been produced.

A table of cruises which occupied SR1b is presented below with links to the relevant cruise reports (were available).

References

García, M. A., I. Bladé, A. Cruzado, Z. Velásquez, H. García, J. Puigdefàbregas and J. Sospedra, 2002: Observed variability of water properties and transports on the World Ocean Circulation Experiment SR1b section across the Antarctic Circumpolar Current. J. Geophys. Res. 107 (C10) 3162, 10.1029/2000JC000277.

Gersonde, R., 1993: The Expedition Antarktis X/5 of RV Polarstern in 1992. Berichte zur Polarforschung, 131, 167 pp.

Related Fixed Station activities are detailed in Appendix 1

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: Drake Passage - WOCE SR1b

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.