Search the data

Metadata Report for BODC Series Reference Number 1008534


Metadata Summary

Data Description

Data Category CTD or STD cast
Instrument Type
NameCategories
Neil Brown MK3 CTD  CTD; water temperature sensor; salinity sensor; dissolved gas sensors
Instrument Mounting lowered unmanned submersible
Originating Country United Kingdom
Originator Dr Sheldon Bacon
Originating Organization Southampton Oceanography Centre (now National Oceanography Centre, Southampton)
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) WOCE
UK WOCE
 

Data Identifiers

Originator's Identifier A25CTD073
BODC Series Reference 1008534
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 1997-08-27 22:03
End Time (yyyy-mm-dd hh:mm) -
Nominal Cycle Interval 2.0 decibars
 

Spatial Co-ordinates

Latitude 54.97017 N ( 54° 58.2' N )
Longitude 36.13233 W ( 36° 7.9' W )
Positional Uncertainty 0.0 to 0.01 n.miles
Minimum Sensor or Sampling Depth 0.99 m
Maximum Sensor or Sampling Depth 1747.63 m
Minimum Sensor or Sampling Height -146.43 m
Maximum Sensor or Sampling Height 1600.21 m
Sea Floor Depth 1601.2 m
Sea Floor Depth Source PEVENT
Sensor or Sampling Distribution Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODERankUnitsTitle
DOXYPR011Micromoles per litreConcentration of oxygen {O2 CAS 7782-44-7} per unit volume of the water body [dissolved plus reactive particulate phase] by in-situ Beckmann probe
OXYSBB011PercentSaturation of oxygen {O2 CAS 7782-44-7} in the water body [dissolved plus reactive particulate phase] by in-situ Beckmann probe and computation from concentration using Benson and Krause algorithm
POTMCV011Degrees CelsiusPotential temperature of the water body by computation using UNESCO 1983 algorithm
PRESPR011DecibarsPressure (spatial coordinate) exerted by the water body by profiling pressure sensor and correction to read zero at sea level
PSALST011DimensionlessPractical salinity of the water body by CTD and computation using UNESCO 1983 algorithm
SIGTPR011Kilograms per cubic metreSigma-theta of the water body by CTD and computation from salinity and potential temperature using UNESCO algorithm
TEMPST011Degrees CelsiusTemperature of the water body by CTD or STD

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."


Narrative Documents

Neil Brown MK3 CTD

The Neil Brown MK3 conductivity-temperature-depth (CTD) profiler consists of an integral unit containing pressure, temperature and conductivity sensors with an optional dissolved oxygen sensor in a pressure-hardened casing. The most widely used variant in the 1980s and 1990s was the MK3B. An upgrade to this, the MK3C, was developed to meet the requirements of the WOCE project.

The MK3C includes a low hysteresis, titanium strain gauge pressure transducer. The transducer temperature is measured separately, allowing correction for the effects of temperature on pressure measurements. The MK3C conductivity cell features a free flow, internal field design that eliminates ducted pumping and is not affected by external metallic objects such as guard cages and external sensors.

Additional optional sensors include pH and a pressure-temperature fluorometer. The instrument is no longer in production, but is supported (repair and calibration) by General Oceanics.

Specifications

These specification apply to the MK3C version.

Pressure Temperature Conductivity
Range

6500 m

3200 m (optional)

-3 to 32°C 1 to 6.5 S cm-1
Accuracy

0.0015% FS

0.03% FS < 1 msec

0.0005°C

0.003°C < 30 msec

0.0001 S cm-1

0.0003 S cm-1 < 30 msec

Further details can be found in the specification sheet.

RRS Discovery 230 CTD Data Documentation

Introduction

CTD profile data are presented from the FOUREX cruise Discovery 230, as reported by Bacon et al. (1998).

Instrumentation and Methodology

Instrumentation Summary

The CTD profiles were taken with Neil Brown Systems MkIIIb/c CTDs (Deep01 and Deep02) mounted beneath a bottle rosette. Both CTDs are MkIIIb instruments converted to a MkIIIc format. Deep02 was specially modified to accept data from two FSI modules: one Platinum Resistance Thermometer Module FSI OTM-D-112 s/n 1325-011592, and one Conductivity Module FSI OCM-D-112 s/n 1333-011592. These mount on a specially modified 10 litre GO water bottle. The CTD was fitted with a dissolved oxygen sensor, a Chelsea Instruments fluorometer s/n 88/2050/95, a Chelsea Instruments Transmissometer s/n 161/2642/003, and a Simrad altimeter (model 807-200m).

Data Acquisition

Lowering rates for the CTD package were generally in the range 0.5-1.0ms-1 but could be up to 1.5ms-1. CTD data were logged at 16 frames per second. The CTD deck unit passes raw data to a dedicated Level A microcomputer where 1 second averages are assembled. During this process the Level A calculates the rate of change of temperature and a median sorting routine detects and removes pressure spikes. These data are sent to the Level B for archival. The data are then passed to a Level C workstation for conversion to Pstar format and calibration.

A total of 143 stations were occupied. The first 135 stations were occupied using Deep01. For the remaining stations, 136 - 143, Deep02 was used. No CTD oxygen data were measured using Deep02.

Data Processing

The 1 second data passed to the Level C were converted to Pstar format and initially calibrated with coefficients from laboratory calibrations followed by a number of calibration corrections. The up and down cast data were extracted for merging with the bottle firing codes, thus the CTD variables were reconciled with the bottle samples. Final calibrations were applied using the sample bottle data. Finally, down cast data were extracted, sorted on pressure and averaged to 2db values.

The data were worked up to WOCE standards by the data originators before being supplied to BODC.

BODC Data Processing

No further calibrations were applied to the data received by BODC. BODC were mainly concerned with the screening and banking of the data.

The CTD data were received as 2db, pressure sorted, down cast data. Parameters were pressure (dbar), temperature (its-90), salinity (pss-78) and oxygen (µmol/kg). BODC have not received the fluorometer or transmissometer data.

The data were converted into the BODC internal format (a subset of NetCDF) to allow the use of in-house software tools, notably the graphics editor. Oxygen was converted to umol/l. Spikes in the data were manually flagged 'suspect' by modification of the associated quality control flag. In this way none of the original data values were edited or deleted during quality control.

The temperature, salinity and oxygen data from cruise D230 required little flagging and just a few points were set suspect. Profiles 093 and 102 were cold with low salinity. The oxygen profile for 001 has an unusual feature at ~2000db that has been flagged suspect.

Once screened, the CTD data were loaded into a database under the Oracle relational database management system. The start time stored in the database is the CTD deployment time, and the end time is the time the CTD was removed from the water. Actually these times are more precisely the start and end of data logging. Latitude and longitude are the mean positions between the start and end times calculated from the master navigation in the binary merged file.

References

Bacon, S. et al. (1998). RRS Discovery Cruise 230. Southampton Oceanography Centre, Cruise Report No. 16, 104pp.


Project Information

World Ocean Circulation Experiment (WOCE)

The World Ocean Circulation Experiment (WOCE) was a major international experiment which made measurements and undertook modelling studies of the deep oceans in order to provide a much improved understanding of the role of ocean circulation in changing and ameliorating the Earth's climate.

WOCE had two major goals:

  • Goal 1. To develop models to predict climate and to collect the data necessary to test them.

  • Goal 2. To determine the representativeness of the Goal 1 observations and to deduce cost effective means of determining long-term changes in ocean circulation.


UK WOCE

The UK made a substantial contribution to the international World Ocean Circulation Experiment (WOCE) project by focusing on two important regions:

  1. Southern Ocean - links all the worlds oceans, controlling global climate.
  2. North Atlantic - directly affects the climate of Europe.

A major part of the UK effort was in the Southern Ocean and work included:

  • Two surveys, in the South Atlantic as part of the WOCE Hydrographic Programme.
  • SWINDEX, a year long study of the Antarctic Circumpolar Current (ACC) where it crosses major topography south of Africa.
  • ADOX, a study of deep water flow from the Atlantic to the Indian Ocean.
  • ACCLAIM, a study of the ACC by altimetry and island measurements.

In the North Atlantic the UK undertook:

  • NATRE, a purposeful tracer experiment to look at cross isopycnic processes.
  • CONVEX, a study of the deep ocean circulation and its changes.
  • VIVALDI, a seven year programme of seasonally repeated surveys to study the upper ocean.
  • Long-term observations of ocean climate in the North West Approaches.

Satellite ocean surface topography, temperature and wind data were merged with in situ observations and models to create a complete description of ocean circulation, eddy motion and the way the ocean is driven by the atmosphere.

The surveys were forerunners to the international Global Ocean Observing System (GOOS). GOOS was later established to monitor annual to decadal changes in ocean circulation and heat storage which are vital in the prediction of climate change.


Data Activity or Cruise Information

Cruise

Cruise Name D230
Departure Date 1997-08-07
Arrival Date 1997-09-17
Principal Scientist(s)Sheldon Bacon (Southampton Oceanography Centre)
Ship RRS Discovery

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification