Metadata Report for BODC Series Reference Number 1324193


Metadata Summary

Data Description

Data Category Water sample data
Instrument Type
NameCategories
Niskin bottle  discrete water samplers
Instrument Mounting lowered unmanned submersible
Originating Country United Kingdom
Originator Dr Naomi Greenwood
Originating Organization Centre for Environment, Fisheries and Aquaculture Science Lowestoft Laboratory
Processing Status banked
Project(s) Coastal Observatory
 

Data Identifiers

Originator's Identifier PD17_03_CTD_NUTS_533:C09
BODC Series Reference 1324193
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2003-04-16 23:57
End Time (yyyy-mm-dd hh:mm) -
Nominal Cycle Interval -
 

Spatial Co-ordinates

Latitude 53.54204 N ( 53° 32.5' N )
Longitude 3.37025 W ( 3° 22.2' W )
Positional Uncertainty Unspecified
Minimum Sensor Depth 2.0 m
Maximum Sensor Depth 23.6 m
Minimum Sensor Height -0.6 m
Maximum Sensor Height 21.0 m
Sea Floor Depth 23.0 m
Sensor Distribution Unspecified -
Sensor Depth Datum Unspecified -
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODE Rank Units Short Title Title
ADEPZZ01 1 Metres DepBelowSurf Depth below surface of the water body
AMONAAD1 1 Micromoles per litre NH4_GF/CFilt_Col Concentration of ammonium {NH4+ CAS 14798-03-9} per unit volume of the water body [dissolved plus reactive particulate
BOTTFLAG 1 Dimensionless C22_flag Sampling process quality flag (BODC C22)
FIRSEQID 1 Dimensionless FireSeqNo Bottle firing sequence number
NTRIAAD1 1 Micromoles per litre NO2_GF/FFilt_ColAA Concentration of nitrite {NO2- CAS 14797-65-0} per unit volume of the water body [dissolved plus reactive particulate
NTRZAAD1 1 Micromoles per litre NO3+NO2_GF/FFilt_ColAA Concentration of nitrate+nitrite {NO3+NO2} per unit volume of the water body [dissolved plus reactive particulate
PHOSAAD1 1 Micromoles per litre PO4_GF/FFilt_ColAA Concentration of phosphate {PO43- CAS 14265-44-2} per unit volume of the water body [dissolved plus reactive particulate
ROSPOSID 1 Dimensionless RosPos Bottle rosette position identifier
SAMPRFNM 1 Dimensionless SampRef Sample reference number
SLCAAAD1 1 Micromoles per litre SiOx_GF/FFilt_ColAA Concentration of silicate {SiO44- CAS 17181-37-2} per unit volume of the water body [dissolved plus reactive particulate
 

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Centre for Environment, Fisheries and Aquaculture Science (Cefas) data access conditions

The Centre for Environment, Fisheries and Aquaculture Science (Cefas) is an Executive Agency of the Department of Environment, Food and Rural Affairs (Defra), formerly the Ministry of Agriculture, Fisheries and Food (MAFF). It was also known previously as the Directorate of Fisheries Research (DFR). This data policy refers to data collected by the organisation under all titles.


Narrative Documents

Niskin Bottle

The Niskin bottle is a device used by oceanographers to collect subsurface seawater samples. It is a plastic bottle with caps and rubber seals at each end and is deployed with the caps held open, allowing free-flushing of the bottle as it moves through the water column.

Standard Niskin

The standard version of the bottle includes a plastic-coated metal spring or elastic cord running through the interior of the bottle that joins the two caps, and the caps are held open against the spring by plastic lanyards. When the bottle reaches the desired depth the lanyards are released by a pressure-actuated switch, command signal or messenger weight and the caps are forced shut and sealed, trapping the seawater sample.

Lever Action Niskin

The Lever Action Niskin Bottle differs from the standard version, in that the caps are held open during deployment by externally mounted stainless steel springs rather than an internal spring or cord. Lever Action Niskins are recommended for applications where a completely clear sample chamber is critical or for use in deep cold water.

Clean Sampling

A modified version of the standard Niskin bottle has been developed for clean sampling. This is teflon-coated and uses a latex cord to close the caps rather than a metal spring. The clean version of the Levered Action Niskin bottle is also teflon-coated and uses epoxy covered springs in place of the stainless steel springs. These bottles are specifically designed to minimise metal contamination when sampling trace metals.

Deployment

Bottles may be deployed singly clamped to a wire or in groups of up to 48 on a rosette. Standard bottles have a capacity between 1.7 and 30 L, while Lever Action bottles have a capacity between 1.7 and 12 L. Reversing thermometers may be attached to a spring-loaded disk that rotates through 180° on bottle closure.

Dissolved nutrient data series measured by CEFAS on POL Coastal Observatory cruise 7, RV Prince Madog cruise PD17_03

Data Originator

Naomi Greenwood, CEFAS, Lowestoft

Content of data series

Parameter Units Parameter code CTD Samples
Total NO3 and NO2 concentration µmol l -1 NTRZAAD1 32
Phosphate concentration µmol l -1 PHOSAAD1 32
Silicate concentration µmol l -1 SLCAAAD1 32
Ammonia concentration µmol l -1 AMONAAD1 32
Nitrite (NO2) concentration µmol l -1 NTRIAAD1 32

Originator's Protocol

Samples for nutrient analyses were collected from water bottle rosette sampling systems mounted on the lowered CTD. Samples were collected near-surface from a total of 32 CTD stations. Each sample was passed through a Whatman GF/F filter and preserved with mercuric chloride to give a final concentration of 20 µg l -1 .

Samples were stored refrigerated at -18° C until analysed by a Skalar continuous flow analyzer, following Kirkwood (1996).

BODC Processing

The data were supplied to BODC as an Excel spreadsheet. This was converted to an ASCII format file for loading into the BODC archive. Methodology and units were checked against information held in the BODC parameter dictionary and an appropriate parameter code was attributed to each variable. The file's data and metadata fields were then checked prior to loading into a database.

The data were loaded into the database under the Oracle Relational Database Management System by matching the sample's station identifier and depth with the information already held in the database for this cruise. Where the data supplied included multiple replicates for each station, the mean value and standard deviation were loaded into the database. For single samples, the data were loaded without further modification.

Comments on data quality and outstanding issues

There is a '<' flag on the quoted surface value for ammonia concentration obtained during cast C33. This indicates that the real value is below the limit of detection. The detection limit is the quoted value (0.1 µmol l -1 in this instance).

References

Kirkwood, D. S. 1996. Nutrients: practical notes on their determination in seawater. ICES Techniques in Marine Environmental Sciences, no 17. International Council for the Exploration of the Seas, Copenhagen, 23 pp.

Conditions of Use

CEFAS Disclaimer:
"Reproduction of this material is limited to academic and educational uses only and not for any commercial purposes without permission from CEFAS. The data are provided "as is" and in no event shall CEFAS be liable for any damages, including, without limitation, any disruption, damage and/or loss to your data or computer system that may occur while using this site or data. CEFAS makes no warranty, express or implied, including the warranties of merchantability and fitness for a particular purpose; nor assumes any legal liability or responsibility for the accuracy, completeness or usefulness of any data, information, apparatus, product, or process disclosed; nor represents that its use would not infringe the rights of any third party."

The Data Originator must be informed that the supply has occurred.

Due acknowledgement of the Originator and the Originator's Institute is made by the receiver in any product using the data.

No commercial gain ensues from usage of the data.


Project Information

Proudman Oceanographic Laboratory Coastal Observatory

The Coastal Observatory was established by Proudman Oceanographic Laboratory as a coastal zone real time observing and monitoring system. The main objective is to understand a coastal sea's response both to natural forcing and to the consequences of human activity. Near real-time measurements will be integrated with coupled models into a pre-operational coastal prediction system whose results will be displayed on the World Wide Web.

The Observatory is expected to grow and evolve as resources and technology allow, all the while building up long time series. A site selection pilot study was carried out in September 2001 and the Observatory became operational in August 2002.

The site is located in Liverpool Bay and is subject to typical coastal sea processes, with strong tides, occasional large storm surges and waves, freshwater input, stable and unstable stratification, high suspended sediment concentration and biogeochemical interaction. Measurements and monitoring will focus on the impacts of storms, variations in river discharge (especially the Mersey), seasonality and blooms in Liverpool Bay.

A variety of methods will be used to obtain measurements, including:

  1. Moored instruments for in situ time series of currents, temperature and salinity profiles, and surface waves and meteorology. It is hoped that turbidity and chlorophyll measurements will be made at another site as the Observatory progresses;
  2. The Cefas Smartbuoy for surface properties such as nutrients and chlorophyll, starting late 2002;
  3. R.V. Prince Madog to carry out spatial surveys and service moorings;
  4. Instrumented ferries for near surface temperature, salinity, turbidity, chlorophyll and nutrients. The first route will be Liverpool to Douglas, Isle of Man, starting late 2002;
  5. Drifters for surface currents and properties such as temperature and salinity, starting in 2004;
  6. Tide gauges, with sensors for meteorology, waves, temperature and salinity, where appropriate;
  7. Meteorological data from Bidston Observatory and Hilbre Island, HF radar and tide gauge sites;
  8. Shore-based HF radar measuring waves and surface currents out to a range of 50 km, starting in 2003;
  9. Satellite data, with infrared for sea surface temperature and visible for chlorophyll and suspended sediment.

The partners currently involved with the project are listed below:

A summary of Coastal Observatory cruises to date on R.V. Prince Madog is given in the table below:

Year No. of cruises Work summary
2001 1 Site selection and pilot study. 95 CTD casts.
2002 4 POL moorings deployed and serviced
Cefas Waverider and SmartBuoy deployed and serviced
103 CTD casts
2003 10 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
341 CTD/LISST casts
2004 9 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
347 CTD/LISST casts
2005 9 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
268 CTD/LISST casts
2006 11 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
508 CTD/LISST casts
2007 9 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
471 CTD/LISST casts
2008 9 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
260 CTD/LISST casts
2009 7 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
213 CTD/LISST casts
2010 8 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
268 CTD/LISST casts
2011 6 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
307 CTD/LISST casts to date, ongoing

Data Activity or Cruise Information

Data Activity

Start Date (yyyy-mm-dd) 2003-04-16
End Date (yyyy-mm-dd) 2003-04-17
Organization Undertaking ActivityUniversity of Wales, Bangor School of Ocean Sciences (now Bangor University School of Ocean Sciences)
Country of OrganizationUnited Kingdom
Originator's Data Activity IdentifierPD17_03_CTD_C09
Platform Categorylowered unmanned submersible

BODC Sample Metadata Report for PD17_03_CTD_C09

Sample reference number Nominal collection volume(l) Bottle rosette position Bottle firing sequence number Minimum pressure sampled (dbar) Maximum pressure sampled (dbar) Depth of sampling point (m) Bottle type Sample quality flag Bottle reference Comments
427028   3 5    2.00    2.00    2.00 Niskin bottle No problem reported    
427029   5 1   23.80   23.90   23.60 Niskin bottle No problem reported    
640523   6 2   23.80   23.90   23.60 Niskin bottle No problem reported    
640526   9 3    2.00    2.00    2.00 Niskin bottle No problem reported    
640529   10 4    2.00    2.00    2.00 Niskin bottle No problem reported    

Please note:the supplied parameters may not have been sampled from all the bottle firings described in the table above. Cross-match the Sample Reference Number above against the SAMPRFNM value in the data file to identify the relevant metadata.

Cruise

Cruise Name PD17/03
Departure Date 2003-04-16
Arrival Date 2003-04-18
Principal Scientist(s)David K Mills (University of Wales, Bangor School of Ocean Sciences)
Ship RV Prince Madog

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain