Metadata Report for BODC Series Reference Number 1638481

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Public domain data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

The recommended acknowledgment is

"This study uses data from the data source/organisation/programme, provided by the British Oceanographic Data Centre and funded by the funding body."

Narrative Documents

Niskin Bottle

The Niskin bottle is a device used by oceanographers to collect subsurface seawater samples. It is a plastic bottle with caps and rubber seals at each end and is deployed with the caps held open, allowing free-flushing of the bottle as it moves through the water column.

Standard Niskin

The standard version of the bottle includes a plastic-coated metal spring or elastic cord running through the interior of the bottle that joins the two caps, and the caps are held open against the spring by plastic lanyards. When the bottle reaches the desired depth the lanyards are released by a pressure-actuated switch, command signal or messenger weight and the caps are forced shut and sealed, trapping the seawater sample.

Lever Action Niskin

The Lever Action Niskin Bottle differs from the standard version, in that the caps are held open during deployment by externally mounted stainless steel springs rather than an internal spring or cord. Lever Action Niskins are recommended for applications where a completely clear sample chamber is critical or for use in deep cold water.

Clean Sampling

A modified version of the standard Niskin bottle has been developed for clean sampling. This is teflon-coated and uses a latex cord to close the caps rather than a metal spring. The clean version of the Levered Action Niskin bottle is also teflon-coated and uses epoxy covered springs in place of the stainless steel springs. These bottles are specifically designed to minimise metal contamination when sampling trace metals.

Deployment

Bottles may be deployed singly clamped to a wire or in groups of up to 48 on a rosette. Standard bottles and Lever Action bottles have a capacity between 1.7 and 30 L. Reversing thermometers may be attached to a spring-loaded disk that rotates through 180° on bottle closure.

Pigments for cruises Jan Mayen JM1-JM11

Document History

Converted from CDROM documentation.

Content of data series

Data Originator

Dr Paul Wassman, University of Tromsø, Norway.

Sampling strategy and methodology

Water samples were taken from bottles on the CTD rosette and filtered through Whatman GF/F filters. The filter papers were extracted into methanol and fluorometrically assayed following the protocols of Holm-Hansen et al. (1965) on board ship.

Comments on data quality

The fluorometer signal on many casts shows a strong increasing gradient from the surface to a depth of 10-15m even when temperature and salinity show the water to be well mixed. This has been attributed to quenching which cannot be calibrated out as no light sensors were carried on the CTD package. The effect was seen to be particularly dramatic for cruises in May and June. Calibrated fluorometer values from the upper 15m should therefore be used with caution, especially from spring cruises.

References

Barlow, R.G., Mantoura, R.F.C., Gough, M.A. and Fileman, T.W., 1993a. Pigment signatures of the phytoplankton composition in the north-east Atlantic during the 1990 spring bloom. Deep Sea Res. II, 40, 459-477.

Barlow, R.G., Mantoura, R.F.C., Gough, M.A. and Fileman, T.W., 1993b. Phaeopigment distribution during the 1990 spring bloom in the north-east Atlantic. Deep Sea Res. I, 40, 2229-2242.

Barlow, R.G., Cummings, D.G., Mantoura, R.F.C. and Fileman, T.W., 1996. Pigment chemotaxonomic distributions of phytoplankton during summer in the western Mediterranean. Deep Sea Res. II, in press.

Holm-Hansen, O., Lorenzen, C.J., Holmes, R.W. and Strictland, J.D.H., 1965. Fluorometric determination of chlorophyll. J. Con. perm. int. Explor. 30, 3-15.

Jeffrey, S.W. and Humphrey, G.F., 1975. New spectrophotometric equations for determining chlorophylls a, b, c1 and c2 in higher plants, algae and natural phytoplankton. Biochem. Physiol. Pflan., 167, 191-194.

Lorenzen, C.J., 1967. Determination of chlorophyll and phaeopigments: spectrophotometric equations. Limnology and Oceanography, 12.

Lorenzen, C.J. and Jeffrey, S.W., 1978. Determination of chlorophyll in seawater. UNESCO Techn. Paper Mar Sci, 35.

Strickland, J.D.H., Parsons, T.R. (1972). A practical handbook of seawater analysis. Fish. Res. Bd. Can.,.167-311.

Tahey, T.M., Duineveld, G.C.A., Berghuis, E.M. and Helder, W., 1994. Relation between sediment-water fluxes of oxygen and silicate and faunal abundance at continental shelf, slope and deep-water stations in the North West Mediterranean. Marine Ecology Progress Series, 104, 119-130.

Thomsen. L., Graf, G., Martens, V. and Steen, E., 1994. An instrument for sampling water from the bottom nepheloid layer. Contin. Shelf Res., 14, 871-882.

Thomsen, L. and Graf, G., 1995. Benthic boundary layer characteristics of the continental margin of the western Barents Sea. Oceanologica Acta, 17/6, 597-607.

Wright, S.W., Jeffrey, S.W., Mantoura, R.F.C., Llewellyn, C.A., Bjornland, T., Repeta, D. and Welschmeyer, N., 1991. Improved HPLC method for the analysis of chlorophylls and carotenoids from marine phytoplankton. Marine Ecology Progress Series, 77, 183-196.

Project Information

Ocean Margin EXchange (OMEX) I

Introduction

OMEX was a European multidisciplinary oceanographic research project that studied and quantified the exchange processes of carbon and associated elements between the continental shelf of western Europe and the open Atlantic Ocean. The project ran in two phases known as OMEX I (1993-1996) and OMEX II - II (1997-2000), with a bridging phase OMEX II - I (1996-1997). The project was supported by the European Union under the second and third phases of its MArine Science and Technology Programme (MAST) through contracts MAS2-CT93-0069 and MAS3-CT97-0076. It was led by Professor Roland Wollast from Université Libre de Bruxelles, Belgium and involved more than 100 scientists from 10 European countries.

Scientific Objectives

The aim of the Ocean Margin EXchange (OMEX) project was to gain a better understanding of the physical, chemical and biological processes occurring at the ocean margins in order to quantify fluxes of energy and matter (carbon, nutrients and other trace elements) across this boundary. The research culminated in the development of quantitative budgets for the areas studied using an approach based on both field measurements and modeling.

OMEX I (1993-1996)

The first phase of OMEX was divided into sub-projects by discipline:

• Physics
• Biogeochemical Cycles
• Biological Processes
• Benthic Processes
• Carbon Cycling and Biogases

This emphasises the multidisciplinary nature of the research.

The project fieldwork focussed on the region of the European Margin adjacent to the Goban Spur (off the coast of Brittany) and the shelf break off Tromsø, Norway. However, there was also data collected off the Iberian Margin and to the west of Ireland. In all a total of 57 research cruises (excluding 295 Continuous Plankton Recorder tows) were involved in the collection of OMEX I data.

Data Availability

Field data collected during OMEX I have been published by BODC as a CD-ROM product, entitled:

• OMEX I Project Data Set (two discs)

Further descriptions of this product and order forms may be found on the BODC web site.

The data are also held in BODC's databases and subsets may be obtained by request from BODC.

Data Activity or Cruise Information

Data Activity

BODC Sample Metadata Report for JM11_CTD_1229

Please note:the supplied parameters may not have been sampled from all the bottle firings described in the table above. Cross-match the Sample Reference Number above against the SAMPRFNM value in the data file to identify the relevant metadata.

Related Data Activity activities are detailed in Appendix 1

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

No Fixed Station Information held for the Series

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: JM11_CTD_1229

Related series for this Data Activity are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.