Search the data

Metadata Report for BODC Series Reference Number 1836415


Metadata Summary

Data Description

Data Category Surface temp/sal
Instrument Type
NameCategories
WET Labs {Sea-Bird WETLabs} C-Star transmissometer  transmissometers
Sea-Bird SBE 45 MicroTSG thermosalinograph  thermosalinographs; water temperature sensor; salinity sensor
Sea-Bird SBE 38 thermometer  water temperature sensor
Turner Designs 10AU fluorometer  fluorometers
Instrument Mounting research vessel
Originating Country United Kingdom
Originator Dr Yvonne Firing
Originating Organization National Oceanography Centre, Southampton
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) ORCHESTRA
 

Data Identifiers

Originator's Identifier JR16002_PRODQXF_SURF
BODC Series Reference 1836415
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2016-11-10 11:07
End Time (yyyy-mm-dd hh:mm) 2016-12-03 00:00
Nominal Cycle Interval 60.0 seconds
 

Spatial Co-ordinates

Southernmost Latitude 67.49800 S ( 67° 29.9' S )
Northernmost Latitude 51.90100 S ( 51° 54.1' S )
Westernmost Longitude 70.00000 W ( 70° 0.0' W )
Easternmost Longitude 45.46350 W ( 45° 27.8' W )
Positional Uncertainty 0.0 to 0.01 n.miles
Minimum Sensor or Sampling Depth 6.5 m
Maximum Sensor or Sampling Depth 6.5 m
Minimum Sensor or Sampling Height -
Maximum Sensor or Sampling Height -
Sea Floor Depth -
Sea Floor Depth Source -
Sensor or Sampling Distribution Fixed common depth - All sensors are grouped effectively at the same depth which is effectively fixed for the duration of the series
Sensor or Sampling Depth Datum Approximate - Depth is only approximate
Sea Floor Depth Datum -
 

Parameters

BODC CODERankUnitsTitle
AADYAA011DaysDate (time from 00:00 01/01/1760 to 00:00 UT on day)
AAFDZZ011DaysTime (time between 00:00 UT and timestamp)
ALATGP011DegreesLatitude north relative to WGS84 by unspecified GPS system
ALONGP011DegreesLongitude east relative to WGS84 by unspecified GPS system
ATTNDR011per metreAttenuation (red light wavelength) per unit length of the water body by 25cm path length red light transmissometer
CNDCSG011Siemens per metreElectrical conductivity of the water body by thermosalinograph
CPHLUMTF1Milligrams per cubic metreConcentration of chlorophyll-a {chl-a CAS 479-61-8} per unit volume of the water body [particulate >unknown phase] by through-flow fluorometer plumbed into non-toxic supply and manufacturer's calibration applied
POPTDR011PercentTransmittance (red light wavelength) per 25cm of the water body by 25cm path length red light transmissometer
PSALSG011DimensionlessPractical salinity of the water body by thermosalinograph and computation using UNESCO 1983 algorithm and calibration against independent measurements
PSALSU011DimensionlessPractical salinity of the water body by thermosalinograph and computation using UNESCO 1983 algorithm and no calibration against independent measurements
TEMPHU011Degrees CelsiusTemperature of the water body by thermosalinograph hull sensor and no verification against independent measurements
TMESSG011Degrees CelsiusTemperature of electrical conductivity measurement by thermosalinograph

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database

RRS James Clark Ross Cruise JR16002 Surface Hydrography Data Quality Document

Temperature, salinity, fluorescence, transmittance and attenuance

There are several instances in the time series where the surface underway system was switched off. During these instances, no data have been recorded in these channels and are represented by null data flags.

Conductivity and sound velocity

The instances where the surface underway system was switched off in these channels can be identified by a sudden change in values of each parameter followed by sensor drift and then a switch back to previous values. These periods of data have been flagged as improbable.

Hull temperature sensor 2

The second hull temperature sensor only started recording data on 30/11/2016, so very little data was recorded. The channel has therefore been dropped from the final series and it is recommended that the primary hull temperature sensor is used.


Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."


Narrative Documents

SeaBird Digital Oceanographic Thermometer SBE38

The SBE38 is an ultra-stable thermistor that can be integrated as a remote temperature sensor with an SBE21 Thermosalinograph or an SBE 45 Micro TSG, or as a secondary temperature sensor with an SBE 16 plus, 16plus-IM, 16plus V2, 16plus-IM V2 or 19plus V2 SEACAT CTD.

Temperature is determined by applying an AC excitation to reference resistances and an ultra-stable aged thermistor. The reference resistor is a hermetically sealed VISHAY. AC excitation and ratiometric comparison using a common processing channel removes measurement errors due to parasitic thermocouples, offset voltages, leakage currents and gain errors.

The SBE38 can operate in polled sampling, where it takes one sample and transmits the data, or in continuous sampling.

Specifications

Depth rating up to 10500 m
Temperature range -5 to 35°C
Initial accuracy ± 0.001°C
Resolution 0.00025°C
Stability 0.001°C in 6 months
Response time 500 ms
Self-heating error < 200 µK

Further details can be found in the manufacturer's specification sheet.

Turner Designs 10AU Field Fluorometer

The Turner Designs 10AU is designed for continuous-flow monitoring or discrete sample analyses of fluorescent species. A variety of optical kits with appropriate filters and lamps are available for a wide range of applications. Individual filters and lamps are also available for customised applications.

Standard optical kits include those for chlorophyll-a (extracted and/or in vivo), phycocyanin, phycoerythrin, CDOM, ammonium, rhodamine and fluorescein dye tracing, crude oil, refined oil, histamine and optical brighteners.

The instrument's light source is a 4 watt lamp and the detector is a photomultiplier tube with a standard detection range of 300-650 nm. A red-sensitive version with a detetion range of 185-970 nm is also available.

Specifications

Operating temperature 0 to 55°C
Detector PhotoMultiplier Tube

300 to 650 nm (standard)

185 to 870 nm (Red)

Detection Limits:
Extracted Chlorophyll-a
Rhodamine WT Dye
Fluorescein Dye

0.025 µg L-1
0.01 ppb (in potable water)
0.01 ppb (in potable water)
Linear range:
Extracted Chlorophyll-a
Rhodamine WT Dye
Fluorescein Dye

0 to 250µg L-1
0 to 250 ppb
0 to 250 ppb

Further details can be found in the manufacturer's specification sheet.

WETLabs C-Star transmissometer

This instrument is designed to measure beam transmittance by submersion or with an optional flow tube for pumped applications. It can be used in profiles, moorings or as part of an underway system.

Two models are available, a 25 cm pathlength, which can be built in aluminum or co-polymer, and a 10 cm pathlength with a plastic housing. Both have an analog output, but a digital model is also available.

This instrument has been updated to provide a high resolution RS232 data output, while maintaining the same design and characteristics.

Specifications

Pathlength 10 or 25 cm
Wavelength 370, 470, 530 or 660 nm
Bandwidth

~ 20 nm for wavelengths of 470, 530 and 660 nm

~ 10 to 12 nm for a wavelength of 370 nm

Temperature error 0.02 % full scale °C-1
Temperature range 0 to 30°C
Rated depth

600 m (plastic housing)

6000 m (aluminum housing)

Further details are available in the manufacturer's specification sheet or user guide.

RRS James Clark Ross Cruise JR16002 Surface Hydrography Instrument Description Document

The sea surface hydrographical suite of sensors was fed by the pumped-seawater, non-toxic supply. The seawater intake was located at 5.5 m below the sea surface. The following surface hydrology sensors were fitted:

Manufacturer Model Main Function Serial number Last calibration date
Sea Bird Electronics SBE45 Thermosalinograph 0016 14/05/2014
Sea Bird Electronics SBE38 Temperature x2 sensors 0601 and 0599 11/06/2015
Chelsea Technologies 10 AU-005 Fluorometer 1100243 -
Wet Labs C-Star Transmissometer CST-396DR 06/08/2015
Litremeter 05SPFA40CE Flow meter 05/811950 09/06/2011

SeaBird MicroTSG Thermosalinograph SBE 45

The SBE45 MicroTSG is an externally powered instrument designed for shipboard measurement of temperature and conductivity of pumped near-surface water samples. The instrument can also compute salinity and sound velocity internally.

The MicroTSG comprises a platinum-electrode glass conductivity cell and a stable, pressure-protected thermistor temperature sensor. It also contains an RS-232 port for appending the output of a remote temperature sensor, allowing for direct measurement of sea surface temperature.

The instrument can operate in Polled, Autonomous and Serial Line Sync sampling modes:

  • Polled sampling: the instrument takes one sample on command
  • Autonomous sampling: the instrument samples at preprogrammed intervals and does not enter quiescence (sleep) state between samples
  • Serial Line Sync: a pulse on the serial line causes the instrument to wake up, sample and re-enter quiescent state automatically

Specifications

  Conductivity Temperature Salinity
Range 0 to 7 Sm-1 -5 to 35°C  
Initial accuracy 0.0003 Sm-1 0.002°C 0.005 (typical)
Resolution 0.00001 Sm-1 0.0001°C 0.0002 (typical)
Typical stability (per month) 0.0003 Sm-1 0.0002°C 0.003 (typical)

Further details can be found in the manufacturer's specification sheet.

RRS James Clark Ross Cruise JR16002 Surface Hydrography Processing Procedures Document

Originator's Data Processing

The sea surface hydrography measurements were performed by a Sea Bird electronics thermosalinograph in the ship's flow through system and by a temperature sensor located near the flow through intake, at the hull. The depth of the flow through intake was 5.5 m. The data streams were logged every second to the SCS system and merged into a comma separated file format, and logged to the Oceanlogger.ACO file. The header information was stored in the associated .TPL files.

NetCDF files containing the data were generated by the originator by mexec. The time variable is seconds after the date time origin, stored in global attribute "data_time_origin", a 6-element [ yyyy mo dd hh mm ss] vector. Often this is [2016 1 1 0 0 0], but not always.

The following files were provided.

  • bst: complete navigation file at half-minute intervals.
  • em122: water depth from centre-beam of em122; the sound speed profile was not kept particularly well up to date with CTD data during the cruise..
  • met: anemometer data, combined with ship navigation to provide true wind speed. Averaged to 1-minute intervals..
  • ocl: oceanlogger data, including two sensors for sea surface temperature (sstemp), and calibrated salinity..
  • sam_jr16002_all.nc : bottle salinity and oxygen data and SBE35 temperature data along with CTD and oxygen sensor data corresponding to bottle closures..
  • sim: ea600, corrected by Carter Area.
Filename Content Description Format Interval Start date Start Time End date End Time
ocl_jr16002_01_medav_clean_cal.nc
  • Temperature - housing
  • Temperature - remote x2
  • Transmissometer
  • Conductivity
  • Salinity
  • Calibrated Salinity
  • Fluorometer
  • Sound velocity
  • Fluorometer flow meter
MSTAR ~5 seconds 10/11/2016 12:07:00 03/12/2016 00:00:00

BODC Data Processing

The files were reformatted to BODC internal format using standard data banking procedures. All files were averaged to 60 second intervals. The following table shows how the variables within the files were mapped to appropriate BODC parameter codes:

Originator's File Originator's Parameter Originator's Units Description BODC code BODC Units Comments and unit conversions
ocl_jr16002_01_medav_clean_cal.nc salinity psu Practical salinity of the water body by thermosalinograph and computation using UNESCO 1983 algorithm and NO calibration against independent measurements PSALSU01 Dimensionless -
ocl_jr16002_01_medav_clean_cal.nc Calibrated salinity psu Practical salinity of the water body by thermosalinograph and computation using UNESCO 1983 algorithm and calibration against independent measurements PSALSG01 Dimensionless -
ocl_jr16002_01_medav_clean_cal.nc sstemp °C Temperature of the water body by thermosalinograph hull sensor and NO verification against independent measurements TEMPHU01 °C -
ocl_jr16002_01_medav_clean_cal.nc sstemp2 °C Temperature of the water body by thermosalinograph hull sensor and NO verification against independent measurements sensor 2 TEMPHU02 °C Sensor recorded poor quality data
ocl_jr16002_01_medav_clean_cal.nc tstemp °C Temperature of conductivity measurement by thermosalinograph TMESSG01 °C -
ocl_jr16002_01_medav_clean_cal.nc conductivity S m-1 Electrical conductivity of the water body by thermosalinograph CNDCSG01 S m-1 -
ocl_jr16002_01_medav_clean_cal.nc chlorophyll µg l-1 Concentration of chlorophyll-a {chl-a} per unit volume of the water body [particulate phase] by through-flow fluorometer plumbed into non-toxic supply and manufacturer's calibration applied CPHLUMTF mg m-3 -
ocl_jr16002_01_medav_clean_cal.nc trans 0 < Tr < 1 Transmittance POPTDR01 % x 100 %

Calibrations

Attenuance

Transmittance was converted to Attenuance using the following calibration applied by BODC.

ATTNDR01 = -4 x (ln POPTDR01 x 0.01))


Project Information

Ocean Regulation of Climate by Heat and Carbon Sequestration and Transports (ORCHESTRA)

The Ocean Regulation of Climate by Heat and Carbon Sequestration and Transports (ORCHESTRA) is a £8.4 million, five year (2016-2021) research programme funded by the Natural Environment Research Council (NERC). The aim of the research is to to advance the understanding of, and capability to predict, the Southern Ocean's impact on climate change via its uptake and storage of heat and carbon. The programme will significantly reduce uncertainties concerning how this uptake and storage by the ocean influences global climate, by conducting a series of unique fieldwork campaigns and innovative model developments.

Background

ORCHESTRA represents the first fully-unified activity by NERC institutes to address these challenges, and will draw in national and international partners to provide community coherence, and to build a legacy in knowledge and capability that will transcend the timescale of the programme itself.

It brings together science teams from six UK research institutions to investigate the role that the Southern Ocean plays in our changing climate and atmospheric carbon draw-down. It is led by British Antarctic Survey, in partnership with National Oceanography Centre, British Geological Survey, Plymouth Marine Laboratory, the Centre for Polar Observation and Modelling and the Sea Mammal Research Unit.

The oceans around Antarctica play a critical a key role in drawing down and storing large amounts of carbon and vast quantities of heat from from the atmosphere. Due to its remoteness and harsh environment, the Southern Ocean is the world's biggest data desert, and one of the hardest places to get right in climate models. The ORCHESTRA programme will make unique and important new measurements in the Southern Ocean using a range of techniques, including use of the world-class UK research vessel fleet, and deployments of innovative underwater robots. The new understanding obtained will guide key improvements to the current generation of computer models, and will enhance greatly our ability to predict climate into the future.

The scope of the programme includes interaction of the Southern Ocean with the atmosphere, exchange between the upper ocean mixed layer and the interior and exchange between the Southern Ocean and the global ocean.

Further details are available on the ORCHESTRA page.

Participants

Six different organisations are directly involved in research for ORCHESTRA. These institutions are:

  • British Antarctic Survey (BAS)
  • National Oceanography Centre (NOC)
  • Plymouth Marine Laboratory (PML)
  • British Geological Survey (BGS)
  • Centre for Polar Observation and Modelling (CPOM)
  • Sea Mammal Research Unit (SMRU)

GO-SHIP are a third party organisation that, although not directly involved with the programme, will conduct ship based observations that will also be used by ORCHESTRA.

Research details

Three Work Packages have been funded by the ORCHESTRA programme. These are described in brief below:

  • Work Package 1: Interaction of the Southern ocean with the atmosphere
    WP1 will use new observations of surface fluxes and their controlling parameters in order to better constrain the exchanges of heat and carbon loss across the surface of the Southern Ocean.

  • Work Package 2: Exchange between the upper ocean mixed layer and the interior.
    This work package will combine observationally-derived data and model simulations to determine and understand the exchanges between the ocean mixed layer and its interior.

  • Work Package 3: Exchange between the Southern Ocean and the global ocean .
    This WP will use budget analyses of the hydrographic/tracer sections to diagnose the three-dimensional velocity field of the waters entering, leaving and recirculating within the Southern Atlantic sector of the Southern ocean.

  • Fieldwork and data collection

    The campaign consists of 12 core cruises on board the NERC research vessels RRS James Clark Ross and RRS James Cook and will include hydrographic/tracer sections conducted across Drake Passage (SR1b), the northern Weddell Sea/Scotia Sea (A23), the northern rim of the Weddell Gyre (ANDREXII) and across the South Atlantic (24S). Section I6S will be performed by GO-SHIP Project Partners. Measurements will include temperature, salinity, dissolved oxygen, velocity, dissolved inorganic carbon, total alkalinity, inorganic nutrients, oxygen and carbon isotopes, and underway meteorological and surface ocean observations including pCO2.

    Tags will be deployed on 30 Weddel seals and these will provide temperature and salinity profiles that can be used alongside the Argo data.

    Autonomous underwater ocean gliders will conduct multi-month missions and will deliver data on ocean stratification, heat content, mixed layer depth and turbulent mixing over the upper 1 km, with previously-unobtainable temporal resolution. These gliders will be deployed in the Weddell Gyre and the ACC.

    Field campaigns with the MASIN meteorological aircrafts will be conducted flying out of Rothera and Halley research stations and the Falkland Islands. These campaigns will deliver information on key variables relating to air-sea fluxes (surface and air temperature, wind, humidity, atmospheric CO2, radiation, turbulent fluxes of heat, momentum and CO2), in different sea ice conditions and oceanic regimes.

    Eart Observation datasets will be used to inform the programme on the properties of the ocean, sea ice and atmosphere and on interactions between them.

    A cluster of 6 deep ocean moorings in the Orkney Passage will collect year round series of AABW temperatre and transport. This work connects to the NERC funded project Dynamics of the Orkney Passage Outflow (DYNOPO).

    The UK Earth System model (UKESM) and underlying physical model will be used to conduct analyses of heat and carbon uptake and transport by the Southern Ocean and their links to wider climate on decadal timescales.

    An eddy-resolving (1/12°) sector model of the ocean south of 30°S with 75 vertical levels, will be built using the NEMO model coupled to the Los Alamos sea ice (CICE) model. The improvements on the ocean boundary layer will be based from the results from the NERC-funded OSMOSIS project and the inclusion of tides.

    20-5 year runs of an adjoint model will be conducted to determine how key forcings and model states affect the uptake and subduction of heat and carbon by the ocean.


Data Activity or Cruise Information

Cruise

Cruise Name JR16002
Departure Date 2016-11-10
Arrival Date 2016-12-03
Principal Scientist(s)Yvonne L Firing (National Oceanography Centre, Southampton)
Ship RRS James Clark Ross

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification