Search the data

Metadata Report for BODC Series Reference Number 2126576


Metadata Summary

Data Description

Data Category Water sample data
Instrument Type
NameCategories
Niskin bottle  discrete water samplers
Instrument Mounting lowered unmanned submersible
Originating Country Spain
Originator Ms MarĂ­a Aranguren Gassis
Originating Organization University of Vigo Department of Ecology and Animal Biology
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) Oceans 2025 Theme 10 SO1:AMT
 

Data Identifiers

Originator's Identifier D371_CTD_DOXY_3606:CTD055
BODC Series Reference 2126576
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2011-10-28 05:25
End Time (yyyy-mm-dd hh:mm) -
Nominal Cycle Interval -
 

Spatial Co-ordinates

Latitude 20.01203 S ( 20° 0.7' S )
Longitude 25.08957 W ( 25° 5.4' W )
Positional Uncertainty 0.05 to 0.1 n.miles
Minimum Sensor or Sampling Depth 3.3 m
Maximum Sensor or Sampling Depth 300.8 m
Minimum Sensor or Sampling Height 5608.2 m
Maximum Sensor or Sampling Height 5905.7 m
Sea Floor Depth 5909.0 m
Sea Floor Depth Source PEVENT
Sensor or Sampling Distribution Unspecified -
Sensor or Sampling Depth Datum Unspecified -
Sea Floor Depth Datum Unspecified -
 

Parameters

BODC CODERankUnitsTitle
ADEPZZ011MetresDepth (spatial coordinate) relative to water surface in the water body
BOTTFLAG1Not applicableSampling process quality flag (BODC C22)
DOXYWITX1Micromoles per litreConcentration of oxygen {O2 CAS 7782-44-7} per unit volume of the water body [dissolved plus reactive particulate phase] by Winkler titration
FIRSEQID1DimensionlessBottle firing sequence number
ROSPOSID1DimensionlessBottle rosette position identifier
SAMPRFNM1DimensionlessSample reference number

Definition of BOTTFLAG

BOTTFLAGDefinition
0The sampling event occurred without any incident being reported to BODC.
1The filter in an in-situ sampling pump physically ruptured during sample resulting in an unquantifiable loss of sampled material.
2Analytical evidence (e.g. surface water salinity measured on a sample collected at depth) indicates that the water sample has been contaminated by water from depths other than the depths of sampling.
3The feedback indicator on the deck unit reported that the bottle closure command had failed. General Oceanics deck units used on NERC vessels in the 80s and 90s were renowned for reporting misfires when the bottle had been closed. This flag is also suitable for when a trigger command is mistakenly sent to a bottle that has previously been fired.
4During the sampling deployment the bottle was fired in an order other than incrementing rosette position. Indicative of the potential for errors in the assignment of bottle firing depth, especially with General Oceanics rosettes.
5Water was reported to be escaping from the bottle as the rosette was being recovered.
6The bottle seals were observed to be incorrectly seated and the bottle was only part full of water on recovery.
7Either the bottle was found to contain no sample on recovery or there was no bottle fitted to the rosette position fired (but SBE35 record may exist).
8There is reason to doubt the accuracy of the sampling depth associated with the sample.
9The bottle air vent had not been closed prior to deployment giving rise to a risk of sample contamination through leakage.

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."


Narrative Documents

Niskin Bottle

The Niskin bottle is a device used by oceanographers to collect subsurface seawater samples. It is a plastic bottle with caps and rubber seals at each end and is deployed with the caps held open, allowing free-flushing of the bottle as it moves through the water column.

Standard Niskin

The standard version of the bottle includes a plastic-coated metal spring or elastic cord running through the interior of the bottle that joins the two caps, and the caps are held open against the spring by plastic lanyards. When the bottle reaches the desired depth the lanyards are released by a pressure-actuated switch, command signal or messenger weight and the caps are forced shut and sealed, trapping the seawater sample.

Lever Action Niskin

The Lever Action Niskin Bottle differs from the standard version, in that the caps are held open during deployment by externally mounted stainless steel springs rather than an internal spring or cord. Lever Action Niskins are recommended for applications where a completely clear sample chamber is critical or for use in deep cold water.

Clean Sampling

A modified version of the standard Niskin bottle has been developed for clean sampling. This is teflon-coated and uses a latex cord to close the caps rather than a metal spring. The clean version of the Levered Action Niskin bottle is also teflon-coated and uses epoxy covered springs in place of the stainless steel springs. These bottles are specifically designed to minimise metal contamination when sampling trace metals.

Deployment

Bottles may be deployed singly clamped to a wire or in groups of up to 48 on a rosette. Standard bottles and Lever Action bottles have a capacity between 1.7 and 30 L. Reversing thermometers may be attached to a spring-loaded disk that rotates through 180° on bottle closure.

AMT21 (D371) dissolved oxygen concentrations from CTD bottle samples

Originator's Protocol for Data Acquisition and Analysis

This data originates from analyses on samples collected from 42 CTD casts during the cruise. Eight glass 125 mL bottle were filled with seawater taken directly from the Niskin bottles at 8 different depths using a silicone tube. Samples were fixed immediately and analysed during the following 24 hours.

Discrete dissolved oxygen concentration was measured by automated precision Winkler titration performed with a Metrohm 848 Titrino, utilising a potentiometric end point as described in Serret et al. (1999). The concentration of thiosulphate was calibrated every day.

References Cited

Serret P., Fernández E., Sostres J.A., Anadón R., 1999. Seasonal compensation of plankton production and respiration in a temperate sea. Marine Ecology Progress Series 187: 43-57.

Instrumentation Description

Metrohm 848 Titrino

BODC Data Processing Procedures

Data were submitted during the cruise in an Excel spreadsheet for calibration of the Sea-Bird 43 oxygen sensor and archived under BODC accession number BOD120006. Sample metadata (station, latitude, longitude, date and time, CTD cast, rosette bottle number and depth) were checked against information held in the database. There were no discrepancies.

The concentration data were provided in micromoles per litre and no unit conversions were applied.

The data were reformatted and loaded in BODC's samples database under Oracle Relational Database Management System. Data were marked up with BODC parameter codes and loaded into the database. Individual samples were matched through rosette sampling bottle number and depth.

A parameter mapping table is provided below;

Originator's Parameter Units Description BODC Parameter Code Units Comments
Oxygen concentration (mean) by titration µmol l-1 Concentration of oxygen {O2} per unit volume of the water body [dissolved phase] by Winkler titration DOXYWITX µmol l-1 -

Data Quality Report

There were three data points flagged as suspect by the data originator. A further 18 values were flagged by BODC as outliers in the calibration of the sensor and have been flagged suspect.

Problem Report

All of the Winkler concentrations from samples collected from CTD023 and CTD025 were outliers in the sensor calibration. There did not appear to be a step change in the sensor over this period and after discussion with the originators' during the cruise the data were considered suspect and excluded from the Sea-Bird 43 oxygen sesnor calibration dataset.


Project Information

Oceans 2025 Theme 10, Sustained Observation Activity 1: The Atlantic Meridional Transect (AMT)

The Atlantic Meridional Transect has been operational since 1995 and through the Oceans 2025 programme secures funding for a further five cruises during the period 2007-2012. The AMT programme began in 1995 utilising the passage of the RRS James Clark Ross between the UK and the Falkland Islands southwards in September and northwards in April each year. Prior to Oceans 2025 the AMT programme has completed 18 cruises following this transect in the Atlantic Ocean. This sustained observing system aims to provide basin-scale understanding of the distribution of planktonic communities, their nutrient turnover and biogenic export in the context of hydrographic and biogeochemical provinces of the North and South Atlantic Oceans.

The Atlantic Meridional Transect Programme is an open ocean in situ observing system that will:

  • give early warning of any fundamental change in Atlantic ecosystem functionng
  • improve forecasts of the future ocean state and associated socio-economic impacts
  • provide a "contextual" logistical and scientific infrastructure for independently-funded national and international open ocean biogeochemical and ecological research.

The specific objectives are:

  • To collect hydrographic, chemical, ecological and optical data on transects between the UK and the Falkland Islands
  • To quantify the nature and causes of ecological and biogeochemical variability in planktonic ecosystems
  • To assess the effects of variability in planktonic ecosystems on biogenic export and on air-sea exchange of radiatively active gases

The measurements taken and experiments carried out on the AMT cruises will be closely linked to Themes 2 and 5. The planned cruise track also allows for the AMT data to be used in providing spatial context to the Sustained Observation Activities at the Porcupine Abyssal Plain Ocean Observatory (SO2) and the Western Channel Observatory (SO10).

More detailed information on this Work Package is available at pages 6 - 9 of the official Oceans 2025 Theme 10 document: Oceans 2025 Theme 10

Weblink: http://www.oceans2025.org/


Data Activity or Cruise Information

Data Activity

Start Date (yyyy-mm-dd) 2011-10-28
End Date (yyyy-mm-dd) 2011-10-28
Organization Undertaking ActivityPlymouth Marine Laboratory
Country of OrganizationUnited Kingdom
Originator's Data Activity IdentifierD371_CTD_CTD055
Platform Categorylowered unmanned submersible

BODC Sample Metadata Report for D371_CTD_CTD055

Sample reference number Nominal collection volume(l) Bottle rosette position Bottle firing sequence number Minimum pressure sampled (dbar) Maximum pressure sampled (dbar) Depth of sampling point (m) Bottle type Sample quality flag Bottle reference Comments
620048   20.00 1 1  302.90  304.30  300.80 Niskin bottle No problem reported    
620051   20.00 2 2  202.40  204.20  201.20 Niskin bottle No problem reported    
620054   20.00 3 3  162.70  163.50  161.30 Niskin bottle No problem reported    
620057   20.00 4 4  162.60  162.90  161.00 Niskin bottle No problem reported    
620060   20.00 5 5  162.30  163.20  161.00 Niskin bottle No problem reported    
620063   20.00 6 6  137.10  138.10  136.00 Niskin bottle No problem reported    
620066   20.00 7 7  137.00  138.40  136.10 Niskin bottle No problem reported    
620069   20.00 8 8  122.10  123.10  121.10 Niskin bottle No problem reported    
620072   20.00 9 9  102.50  103.10  101.40 Niskin bottle No problem reported    
620075   20.00 10 10   80.10   80.90   79.30 Niskin bottle No problem reported    
620078   20.00 11 11   80.10   80.70   79.20 Niskin bottle No problem reported    
620081   20.00 12 12   59.90   60.90   59.30 Niskin bottle No problem reported    
620084   20.00 13 13   60.20   61.00   59.50 Niskin bottle No problem reported    
620087   20.00 14 14   35.00   35.50   34.30 Niskin bottle No problem reported    
620090   20.00 15 15   34.80   35.40   34.20 Niskin bottle No problem reported    
620093   20.00 16 16   21.70   22.60   21.30 Niskin bottle No problem reported    
620096   20.00 17 17   21.70   22.50   21.20 Niskin bottle No problem reported    
620099   20.00 18 18    3.40    4.60    3.30 Niskin bottle No problem reported    
620102   20.00 19 19    3.10    4.50    3.10 Niskin bottle No problem reported    
620105   20.00 20 20    3.70    4.40    3.30 Niskin bottle No problem reported    
620108   20.00 21 21    3.40    4.20    3.10 Niskin bottle No problem reported    
620111   20.00 22 22    3.70    4.40    3.30 Niskin bottle No problem reported    
620114   20.00 23 23    3.70    4.10    3.20 Niskin bottle No problem reported    
620117   20.00 24 24    3.10    4.20    2.90 Niskin bottle No problem reported    

Please note:the supplied parameters may not have been sampled from all the bottle firings described in the table above. Cross-match the Sample Reference Number above against the SAMPRFNM value in the data file to identify the relevant metadata.

Related Data Activity activities are detailed in Appendix 1

Cruise

Cruise Name D371 (AMT21)
Departure Date 2011-09-29
Arrival Date 2011-11-13
Principal Scientist(s)Glen A Tarran (Plymouth Marine Laboratory)
Ship RRS Discovery

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification

Appendix 1: D371_CTD_CTD055

Related series for this Data Activity are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.

Series IdentifierData CategoryStart date/timeStart positionCruise
2006389Water sample data2011-10-28 05:25:3020.01203 S, 25.08957 WRRS Discovery D371 (AMT21)
2055205Water sample data2011-10-28 05:25:3020.01203 S, 25.08957 WRRS Discovery D371 (AMT21)
2122932Water sample data2011-10-28 05:25:3020.01203 S, 25.08957 WRRS Discovery D371 (AMT21)
1340967Water sample data2011-10-28 05:26:0020.01203 S, 25.08957 WRRS Discovery D371 (AMT21)