Search the data

Metadata Report for BODC Series Reference Number 282246


Metadata Summary

Data Description

Data Category CTD or STD cast
Instrument Type CTD/STD cast
Instrument Mounting research vessel
Originating Country United Kingdom
Originator -
Originating Organization University of Wales, Bangor School of Ocean Sciences (now Bangor University School of Ocean Sciences)
Processing Status QC in progress
Online delivery of data Download not available
Project(s) -
 

Data Identifiers

Originator's Identifier CH9/83/A8
BODC Series Reference 282246
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 1983-07-16 13:21
End Time (yyyy-mm-dd hh:mm) -
Nominal Cycle Interval 1.0 metres
 

Spatial Co-ordinates

Latitude 57.81670 N ( 57° 49.0' N )
Longitude 8.66250 W ( 8° 39.8' W )
Positional Uncertainty Unspecified
Minimum Sensor or Sampling Depth 1.0 m
Maximum Sensor or Sampling Depth 96.0 m
Minimum Sensor or Sampling Height 9.0 m
Maximum Sensor or Sampling Height 104.0 m
Sea Floor Depth 105.0 m
Sea Floor Depth Source -
Sensor or Sampling Distribution Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODERankUnitsTitle
CNDCPR011Siemens per metreElectrical conductivity of the water body by in-situ conductivity cell
DEPHPR011MetresDepth (spatial coordinate) relative to water surface in the water body by profiling pressure sensor and conversion to seawater depth using UNESCO algorithm
POATCV011per metrePotential attenuance (unspecified wavelength) per unit length of the water body by transmissometer and computation using P-EXEC algorithm
PSALPR011DimensionlessPractical salinity of the water body by conductivity cell and computation using UNESCO 1983 algorithm
TEMPST011Degrees CelsiusTemperature of the water body by CTD or STD

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Public domain data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

The recommended acknowledgment is

"This study uses data from the data source/organisation/programme, provided by the British Oceanographic Data Centre and funded by the funding body."


Narrative Documents

RRS Challenger Cruise 9/83 CTD Data Documentation

Introduction

Documentation for the CTD data collected on RRS Challenger 9/83 (July 1983) by the School of Ocean Sciences, University of Wales, Bangor, under the direction of E. Hill.


Project Information


No Project Information held for the Series

Data Activity or Cruise Information

Cruise

Cruise Name CH9/83
Departure Date 1983-07-04
Arrival Date 1983-07-20
Principal Scientist(s)John H Simpson (University of Wales, Bangor School of Ocean Sciences)
Ship RRS Challenger

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification