Search the data

Metadata Report for BODC Series Reference Number 326927


Metadata Summary

Data Description

Data Category CTD or STD cast
Instrument Type
NameCategories
Guildline Model 8770 Digital CTD  CTD; water temperature sensor
Instrument Mounting research vessel
Originating Country United Kingdom
Originator -
Originating Organization Ministry of Agriculture, Fisheries and Food Lowestoft Fisheries Laboratory (now Centre for Environment, Fisheries and Aquaculture Science Lowestoft Laboratory)
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) -
 

Data Identifiers

Originator's Identifier CO8/89/79
BODC Series Reference 326927
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 1989-07-19 20:28
End Time (yyyy-mm-dd hh:mm) -
Nominal Cycle Interval 1.0 decibars
 

Spatial Co-ordinates

Latitude 54.98500 N ( 54° 59.1' N )
Longitude 1.35000 W ( 1° 21.0' W )
Positional Uncertainty Unspecified
Minimum Sensor or Sampling Depth 0.5 m
Maximum Sensor or Sampling Depth 19.3 m
Minimum Sensor or Sampling Height 3.7 m
Maximum Sensor or Sampling Height 22.5 m
Sea Floor Depth 23.0 m
Sea Floor Depth Source -
Sensor or Sampling Distribution Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODERankUnitsTitle
POPTZZ011PercentTransmittance (unspecified wavelength) per unspecified length of the water body by transmissometer
PRESPR011DecibarsPressure (spatial coordinate) exerted by the water body by profiling pressure sensor and correction to read zero at sea level
PSALPR011DimensionlessPractical salinity of the water body by conductivity cell and computation using UNESCO 1983 algorithm
TEMPST011Degrees CelsiusTemperature of the water body by CTD or STD

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."


Narrative Documents

Guildline 8770 CTD profiling system and 8709 probe

The Guildline 8770 is a portable ocean profiling system comprising a probe (model 8709), control unit and winch. Three versions of the probe are available: standard, Artic and batfish. The differences between the versions lie in numbers and types of connectors, and the existence of a protective cage (not present in the batfish version). The probe has a nominal drop rate of 1 ms-1 and a pressure rating of 1000 dbar.

The probe includes a resistance thermometer temperature sensor, a strain gauge pressure sensor, a conductivity cell, a temperature-compensated polarographic dissolved oxygen sensor and a combination pH sensor incorporating a glass measuring electrode and a calomel reference electrode. The probe digitises all measurements, and phase encodes and transmits the data to the control unit.

Specifications

Parameter Range Accuracy (180 days) Display Resolution Response time
Depth 0 to 1000 dbar

Linearity: ± 0.5%

Hysteresis: ± 0.25%

Zero offset: ± 1%

Sensitivity error: ± 1%

0.1 dbar < 1 msec
Temperature -3 to 38.99°C ± 0.02°C 0.01°C 60 msec
Conductivity ratio 0.001 to 1.6 ± 0.0004 0.0002 60 msec
Salinity (calculated) 0.1 to 40 ppt ± 0.04 ppt 0.01 ppt  
pH

6 to 9

2 to 12

± 0.05

± 0.1

0.01 30 sec to 90% for pH 6 or 10°C change
Dissolved Oxygen (calculated) 0 to 15 ppm ± 0.5 ppm (for 90 days) 0.01 ppm

5 sec to 90% for a change in oxygen only

3 min to 50% for a 10°C change in temperature

10 min to 90% for a 10°C change in temperature

Further details can be found in the manufacturer's specification sheet.

RV Corystes Cruise 8/1989 CTD Data Documentation

Date July 1989
Area North Sea North East Coast
CTD Shallow water unit, S/N 47341

Details of Profiles

Altimeter fitted. Transmissometer fitted. Logging at 1 sample per second -1 (HP 1000).

(a) 1 x 25h anchor stations (no data from 1st dip, station 3)
(b) 3 x 13h anchor stations (no data from 1st dip, station 99, A53)
(c) 40 station CTD grid (no data from station 178)
(d) 16 miscellaneous CTD stations
118 uncorrected data files.
117 corrected data files.

Calibration details

Pressure calibration before and after cruise. Doubts over altimeter data prevented usual comparison between CTD pressure values and height above seabed/water depth, laboratory calibration prior to cruise used to correct CTD pressure values (July 1989).

Temperature calibration of July 1989 used, confirmed by DSRT.

Water samples collected for salinity calibration. Each anchor station had its own salinity correction.

Transmission

Calculation of %Transmission from logged data T1 follows temperature. Then:

%Trans = 100 - 2*T1 for T1 >50.0

See program listing in this folder. Corrections applied.

Pressure

From calibration of July 19 no correction necessary.

Temperature

dT = a*T(ctd)*T(ctd) + B*T(ctd) + c

where:

a = -8.98692e-4
b = 2.8007e-3
c = 2.036e-1

Salinity

Each of the anchor stations (AS1-AS4) has a unique calibration.

dS = a*S(ctd) + b

  • AS1: a = -1.83753e-1 b = 6.124 ( 4- 30)
  • AS2: a = 0.0 b = -0.191 ( 69- 83)
  • AS3: a = -3.7343e-1 b = 12.679 ( 87-104)
  • AS4: a = -2.37015e-1 b = 7.974 (120-137)

The coefficients for the other stations worked during the cruise are as follows:

Grid stations 139-177: a = -1.91788e-1
b = 6.432
stations 48- 66: as for AS1
stations 106-110: as for AS3

General Data Screening carried out by BODC

BODC screen both the series header qualifying information and the parameter values in the data cycles themselves.

Header information is inspected for:

  • Irregularities such as unfeasible values
  • Inconsistencies between related information, for example:
    • Times for instrument deployment and for start/end of data series
    • Length of record and the number of data cycles/cycle interval
    • Parameters expected and the parameters actually present in the data cycles
  • Originator's comments on meter/mooring performance and data quality

Documents are written by BODC highlighting irregularities which cannot be resolved.

Data cycles are inspected using time or depth series plots of all parameters. Currents are additionally inspected using vector scatter plots and time series plots of North and East velocity components. These presentations undergo intrinsic and extrinsic screening to detect infeasible values within the data cycles themselves and inconsistencies as seen when comparing characteristics of adjacent data sets displaced with respect to depth, position or time. Values suspected of being of non-oceanographic origin may be tagged with the BODC flag denoting suspect value; the data values will not be altered.

The following types of irregularity, each relying on visual detection in the plot, are amongst those which may be flagged as suspect:

  • Spurious data at the start or end of the record.
  • Obvious spikes occurring in periods free from meteorological disturbance.
  • A sequence of constant values in consecutive data cycles.

If a large percentage of the data is affected by irregularities then a Problem Report will be written rather than flagging the individual suspect values. Problem Reports are also used to highlight irregularities seen in the graphical data presentations.

Inconsistencies between the characteristics of the data set and those of its neighbours are sought and, where necessary, documented. This covers inconsistencies such as the following:

  • Maximum and minimum values of parameters (spikes excluded).
  • The occurrence of meteorological events.

This intrinsic and extrinsic screening of the parameter values seeks to confirm the qualifying information and the source laboratory's comments on the series. In screening and collating information, every care is taken to ensure that errors of BODC making are not introduced.


Project Information


No Project Information held for the Series

Data Activity or Cruise Information

Cruise

Cruise Name COR8/89
Departure Date 1989-07-14
Arrival Date 1989-07-27
Principal Scientist(s)Paul A Gurbutt (Ministry of Agriculture, Fisheries and Food Lowestoft Fisheries Laboratory)
Ship RV Corystes

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification