Metadata Report for BODC Series Reference Number 47326

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."

Narrative Documents

IOS Mk IV Pressure Recorder

This instrument was developed at I.O.S. Bidston and is a deep water pressure recorder (i.e. used at depths between 300m and 5000m). Each recorder consists of one or two Bell and Howell strain gauges and/or a Digiquartz pressure sensor and a temperature sensor.

The sensors are interfaced into a Seadata cassette recording system. Sampling is usually every 3.75 minutes with the integration period equal to the sampling interval, but may be set to other sampling intervals. For example with a 3 second sampling interval and integration period the instrument may be used as a wave recorder.

The recorder is housed in a tubular aluminium frame 1.3m in diameter by 1.4m in height attached to a disposable steel ballast weight. The data logger together with the associated battery supply is lowered into a central 15cm (internal diameter) aluminium tube. Sensors are mounted externally with Marsh Marine connectors. The assembly free falls to the sea floor. An acoustic release system is used to separate the ballast weight and buoyancy is provided by Corning glass spheres attached to the aluminium frame.

Data Processing Notes

Clock lost 64 seconds over 204 days 1 hour 38 minutes 34 seconds; original cycle interval and time values have been corrected.

Instrument characteristics

Station E3

IOS Data Processing of Off-Shore Pressure Recorder Data

Data processing consists of two stages:-

1. Pressures have been sample rate reduced from the basic time step of the recorder to produce the hourly values and have been interpolated by a cubic spline to generate the value on cardinal hours.

2. Instrumental drift has been removed and the drift free series is produced with an artificial mean value, usually of 100mbar.

Project Information

Continental Slope Experiment (CONSLEX)

The Continental Slope Experiment (CONSLEX) was a collaborative exercise between the Institute of Oceanographic Sciences, Scottish Marine Biological Association, Department of Agriculture and Fisheries for Scotland and the Ministry of Agriculture, Fisheries and Food designed to study water movements across the Scottish continental slope.

The experiment ran from August/September 1982 to February/March 1983. The deployments, mainly current meter moorings, were made along a set of lines defined thus:

Bottom-mounted pressure gauges were deployed at either end of lines A-G and four temporary tide gauges were installed from Sligo (Eire) to Shetland. The current meter temperature sensors were supplemented by three thermistor chain deployments.

Data Activity or Cruise Information

No Data Activity or Cruise Information held for the Series

Fixed Station Information

No Fixed Station Information held for the Series

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle: