Search the data

Metadata Report for BODC Series Reference Number 808686


Metadata Summary

Data Description

Data Category Meteorology -unspecified
Instrument Type
NameCategories
Vaisala HMP temperature and humidity sensor  meteorological packages
Vaisala PTB100 barometric pressure sensor  meteorological packages
Vaisala WAA151 cup anemometer  anemometers
Vaisala WAV151 wind vane  anemometers
Instrument Mounting research vessel
Originating Country United Kingdom
Originator Prof Stuart Cunningham
Originating Organization National Oceanography Centre, Southampton
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) Rapid Climate Change Programme
RAPIDMOC
 

Data Identifiers

Originator's Identifier CD177_PRODQXF_MET
BODC Series Reference 808686
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2005-11-12 18:26
End Time (yyyy-mm-dd hh:mm) 2005-11-28 08:00
Nominal Cycle Interval 120.0 seconds
 

Spatial Co-ordinates

Southernmost Latitude 23.78790 N ( 23° 47.3' N )
Northernmost Latitude 49.91470 N ( 49° 54.9' N )
Westernmost Longitude 24.11540 W ( 24° 6.9' W )
Easternmost Longitude 5.05570 W ( 5° 3.3' W )
Positional Uncertainty 0.05 to 0.1 n.miles
Minimum Sensor or Sampling Depth -21.0 m
Maximum Sensor or Sampling Depth -12.0 m
Minimum Sensor or Sampling Height -
Maximum Sensor or Sampling Height -
Sea Floor Depth -
Sea Floor Depth Source -
Sensor or Sampling Distribution -
Sensor or Sampling Depth Datum -
Sea Floor Depth Datum -
 

Parameters

BODC CODERankUnitsTitle
AADYAA011DaysDate (time from 00:00 01/01/1760 to 00:00 UT on day)
AAFDZZ011DaysTime (time between 00:00 UT and timestamp)
ALATGP011DegreesLatitude north relative to WGS84 by unspecified GPS system
ALONGP011DegreesLongitude east relative to WGS84 by unspecified GPS system
CAPHZZ011MillibarsPressure (measured variable) exerted by the atmosphere
CDTASS011Degrees CelsiusTemperature of the atmosphere by dry bulb thermometer
EWDASS011Degrees TrueDirection (from) of wind relative to True North {wind direction} in the atmosphere by in-situ anemometer
EWSBSS011Metres per secondSpeed of wind {wind speed} in the atmosphere by in-situ anemometer

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database

RAPID Cruise CD177 Underway Meteorology - Data Quality Report

  • Atmospheric pressure

    There are sudden drops in atmospheric pressure of approximately 4 mb in a minute on 13 and 19 November 2005. These look like artefacts as the signal is stable before the drop and after the drop, so it appears to be an offset that corrects itself. It has not been flagged as it is unclear which part of the series is the inaccurate part.
  • Wind speed and direction

    Although the data have been corrected for ship's motion, the data still contain a lot of residual movement effects in both speed and direction. This is most noticeable during changes in ship's heading and affects much of the data.

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."


Narrative Documents

Vaisala Analog Barometers Models PTB100 (A), (B) and PTB101 (B), (C)

The PTB 100 series analog barometers are designed both for accurate barometric measurements at room temperature and for general environmental pressure monitoring over a wide temperature range. The long-term stability of the barometer minimizes the need for field adjustment in many applications.

Physical Specifications

Size 97 x 60 x 22 mm
Weight 85g

The barometers use the BAROCAP* silicon capacitive absolute pressure sensor developed by Vaisala for barometric pressure measurements. The BAROCAP* sensor combines the elasticity characteristics and mechanical stability of a single-crystal silicon with the proven capacitive detection principle.

Sensor Specifications

Model Number Pressure Range
(mbar)
Temperature Range
(°C)
Humidity Range Total Accuracy
PTB100A 800 to 1060 -40 to +60 non-condensing +20 °C ± 0.3 mbar
0 to +40 °C ± 1.0 mbar
-20 to +45 °C ± 1.5 mbar
-40 to +60 °C ± 2.5 mbar
PTB100B 600 to 1060 -40 to +60 non-condensing +20 °C ± 0.5 mbar
0 to +40 °C ± 1.5 mbar
-20 to +45 °C ± 2.0 mbar
-40 to +60 °C ± 3.0 mbar
PTB101B 600 to 1060 -40 to +60 non-condensing +20 °C ± 0.5 mbar
0 to +40 °C ± 1.5 mbar
-20 to +45 °C ± 2.0 mbar
-40 to +60 °C ± 3.0 mbar
PTB101C 900 to 1100 -40 to +60 non-condensing +20 °C ± 0.3 mbar
0 to +40 °C ± 1.0 mbar
-20 to +45 °C ± 1.5 mbar
-40 to +60 °C ± 2.5 mbar

* BAROCAP is a registered trademark of Vaisala

Vaisala Temperature and Relative Humidity HMP Sensors

A family of sensors and instruments (sensors plus integral displays or loggers) for the measurement of air temperature and relative humidity. All are based on a probe containing a patent (HUMICAP) capacitive thin polymer film capacitanece humidity sensor and a Pt100 platinum resistance thermometer. The probes are available with a wide range of packaging, cabling and interface options all of which have designations of the form HMPnn or HMPnnn such as HMP45 and HMP230. Vaisala sensors are incorporated into weather stations and marketed by Campbell Scientific.

All versions operate at up to 100% humidity. Operating temperature ranges vary between models, allowing users to select the version best suited to their requirements.

Further details can be found in the manufacturer's specification sheets for the HMP 45 series, HMP 70 series and HMP 230 series.

Vaisala WA15 Wind Set

The WAA151 combines a WAA151 anemometer and a WAV151 wind vane, to measure wind speed and direction.

WAA151 Anemometer

The anemometer has three lightweight conical cups in the cup wheel. A wind-rotated chopper disc, attached to the cup wheel's shaft, cuts an infrared light beam 14 times per revolution, generating a pulse output from a phototransistor. The output rate can be regarded as directly proportional to the wind speed. However, for the best accuracy, a transfer function is used to compensate starting inertia and slight over-speeding:

Uf = 0.328 + 0.101 x R, where Uf = wind speed and R = output pulse rate

A thermostatically controlled heating element in the shaft tunnel prevents the bearings from freezing in cold environments.

WAV151 Wind Vane

The WAV151 is a counter-balanced optelectronic wind vane. Infrared LEDs and phototransistors are mounted in six orbits around a 6 bit Gray coded disc. Turned by the vane, the disc determines the code received by the phototransistors.

Specifications

  WAA151 Anemometer WAV151 Wind Vane
Measurement range 0.4-75 m s-1 0-300° (at 0.4-75 m s-1)
Starting threshold < 0.5 m s-1 < 0.4 m s-1
Resolution - ±2.8°
Accuracy ±0.17 m s-1 (within range 0.4-60 m s-1) < ± 3°
Output 0-750 Hz square wave 6 bit parallel Gray code
Operating temperature -50°C to 55°C -50°C to 55°C

Further details can be found in the manufacturer's specification document.

Meteorological instrument details

Meteorological data were collected with a Vaisala QLI50 sensor collector. The individual sensors can be seen in the table below.

Sensor Serial number Last calibration date
Vaisala PTB100A (barometric pressure) sensor S3440012 -
Vaisala HMP44L (air temperature and relative humidity) S 5040001 -
Vaisala wind vane (WAV) 22306 -
Vaisala anemometer (WAA) 21213 -

BODC processing

Multiple PSTAR format files were provided to BODC which contained all the data from the navigation, meteorological and sea surface hydrography sensors.

Data were transferred from PSTAR format into NETCDF files. Matlab was used to perform the transfer following BODC data processing guidelines. Each data channel was visually inspected and any spikes or periods of dubious data were flagged as suspect using the BODC in house visualisation tool EDSERPLO. The capabilities of the workstation screening software allows for possible comparative screening checks between channels.

The NETCDF file then underwent a further step. This involved using Matlab to split the NETCDF file into three separate NETCDF files. One contained data for hydrography, one for meteorological data and the final NETCDF file held the navigation data.

Originator's processing

Ship's position given in the source files is from the Bestnav system. Bestnav uses multiple GPS devices to obtain the most accurate position at any time via a heirarchy of devices. GPS data were logged from the Trimble 4000 differential GPS, the Glonass GPS, the Ashtech GPS and GPS G12. Ship's gyrocompass readings were also logged. Data from all instruments were logged to the RVS system. A standard PSTAR best navigation file was updated regularly from the bestnav data stream. The preferred input for bestnav is the Trimble 4000 as it has been found to be more accurate on previous cruises. If there were gaps in the Trimble 4000 data, the bestnav process used other input as necessary in the order Glonass, Ashtech, G12, gyro.

The originator noted that the maximum error in both latitude and longitude of the Trimble 4000 was +/- 5m, which was deemed to be large for differential GPS.

Single beam bathymetry data were collected throughout the cruise using the ship's fitted Simrad EA500 hydrographic precision echosounder and towed fish echosounder. The fish was deployed just after sailing from Tenerife and was used in preference to the hull-mounted transducer. Meteorological data were collected and sent, along with thermosalinograph (TSG) system measurements, to the ship's central logging system.

The surface hydrography and thermosalinograph measurements were made by the RSU/UKORS Surfmet system. The depth of the ship's intake is 2.5 m. Onboard processing was carried out on a daily basis and involved running a sequence of executable programs. The initial stage transferred the underway surfmet data into PSTAR from RVS format. Subsequent processing included the calculation of salinity and the merging of the different data streams (heading, bestnav, gyro and ash-gyro). An additional executable was run to determine the true wind speed and direction, taking account of the ship's motion and velocity.

There are two instance where the ship docked and so the sea surface sensors were switched off.

The first gap occurs from 11.30 on 18/11/2005 to 18.15 on 19/11/2005

The second gap occurs from 7.00 on 21/11/2005 to 13.15 on 22/11/2005

More information on the cruise and the cruise report can be found in the CD177 metadata report

RAPID Cruise CD177 Underway Meteorology

Each variable in the originator's files is mapped to a unique BODC parameter code. Details of the mapping can be seen below.

Originator's variable Description Units Parameter code Units Comments
lat Latitude (+ve N) Degrees ALATGP01 Degrees -
lon Longitude (+ve E) Degrees ALONGP01 Degrees -
airtemp Air Temperature oC CDTASS01 oC -
airpress Atmospheric pressure hPa CAPHZZ01 mbar No conversion needed. Units are comparable
speed Wind speed (absolute) ms-1 EWSBSS01 ms-1 Corrected for ship's movement
dirn Wind direction (absolute) Degrees EWDASS01 Degrees Corrected for ship's movement

Data correction and calibration procedures

Latitude and Longitude

A program was run which locates any gap in the latitude and longitude channels and checks to ensure that the ship's speed does not exceed 15 knots. No excessive ship speeds were found. There was one 30 second gap in latitude and longitude, which was filled with linear interpolation using the BODC program navint. Distance run was recomputed to create a continuous record.


Project Information

Rapid Climate Change (RAPID) Programme

Rapid Climate Change (RAPID) is a £20 million, six-year (2001-2007) programme of the Natural Environment Research Council (NERC). The programme aims to improve our ability to quantify the probability and magnitude of future rapid change in climate, with a main (but not exclusive) focus on the role of the Atlantic Ocean's Thermohaline Circulation.

Scientific Objectives

  • To establish a pre-operational prototype system to continuously observe the strength and structure of the Atlantic Meridional Overturning Circulation (MOC).
  • To support long-term direct observations of water, heat, salt, and ice transports at critical locations in the northern North Atlantic, to quantify the atmospheric and other (e.g. river run-off, ice sheet discharge) forcing of these transports, and to perform process studies of ocean mixing at northern high latitudes.
  • To construct well-calibrated and time-resolved palaeo data records of past climate change, including error estimates, with a particular emphasis on the quantification of the timing and magnitude of rapid change at annual to centennial time-scales.
  • To develop and use high-resolution physical models to synthesise observational data.
  • To apply a hierarchy of modelling approaches to understand the processes that connect changes in ocean convection and its atmospheric forcing to the large-scale transports relevant to the modulation of climate.
  • To understand, using model experimentation and data (palaeo and present day), the atmosphere's response to large changes in Atlantic northward heat transport, in particular changes in storm tracks, storm frequency, storm strengths, and energy and moisture transports.
  • To use both instrumental and palaeo data for the quantitative testing of models' abilities to reproduce climate variability and rapid changes on annual to centennial time-scales. To explore the extent to which these data can provide direct information about the thermohaline circulation (THC) and other possible rapid changes in the climate system and their impact.
  • To quantify the probability and magnitude of potential future rapid climate change, and the uncertainties in these estimates.

Projects

Overall 38 projects have been funded by the RAPID programme. These include 4 which focus on Monitoring the Meridional Overturning Circulation (MOC), and 5 international projects jointly funded by the Netherlands Organisation for Scientific Research, the Research Council of Norway and NERC.

The RAPID effort to design a system to continuously monitor the strength and structure of the North Atlantic Meridional Overturning Circulation is being matched by comparative funding from the US National Science Foundation (NSF) for collaborative projects reviewed jointly with the NERC proposals. Three projects were funded by NSF.

A proportion of RAPID funding as been made available for Small and Medium Sized Enterprises (SMEs) as part of NERC's Small Business Research Initiative (SBRI). The SBRI aims to stimulate innovation in the economy by encouraging more high-tech small firms to start up or to develop new research capacities. As a result 4 projects have been funded.


Monitoring the Meridional Overturning Circulation at 26.5N (RAPIDMOC)

Scientific Rationale

There is a northward transport of heat throughout the Atlantic, reaching a maximum of 1.3PW (25% of the global heat flux) around 24.5°N. The heat transport is a balance of the northward flux of a warm Gulf Stream, and a southward flux of cooler thermocline and cold North Atlantic Deep Water that is known as the meridional overturning circulation (MOC). As a consequence of the MOC northwest Europe enjoys a mild climate for its latitude: however abrupt rearrangement of the Atlantic Circulation has been shown in climate models and in palaeoclimate records to be responsible for a cooling of European climate of between 5-10°C. A principal objective of the RAPID programme is the development of a pre-operational prototype system that will continuously observe the strength and structure of the MOC. An initiative has been formed to fulfill this objective and consists of three interlinked projects:

  • A mooring array spanning the Atlantic at 26.5°N to measure the southward branch of the MOC (Hirschi et al., 2003 and Baehr et al., 2004).
  • Additional moorings deployed in the western boundary along 26.5°N (by Prof. Bill Johns, University of Miami) to resolve transport in the Deep Western Boundary Current (Bryden et al., 2005). These moorings allow surface-to-bottom density profiles along the western boundary, Mid-Atlantic Ridge, and eastern boundary to be observed. As a result, the transatlantic pressure gradient can be continuously measured.
  • Monitoring of the northward branch of the MOC using submarine telephone cables in the Florida Straits (Baringer et al., 2001) led by Dr Molly Baringer (NOAA/AOML/PHOD).

The entire monitoring array system created by the three projects will be recovered and redeployed annually until 2008 under RAPID funding. From 2008 until 2014 the array will continue to be serviced annually under RAPID-WATCH funding.

The array will be focussed on three regions, the Eastern Boundary (EB), the Mid Atlantic Ridge (MAR) and the Western Boundary (WB). The geographical extent of these regions are as follows:

  • Eastern Boundary (EB) array defined as a box with the south-east corner at 23.5°N, 25.5°W and the north-west corner at 29.0°N, 12.0°W
  • Mid Atlantic Ridge (MAR) array defined as a box with the south-east corner at 23.0°N, 52.1°W and the north-west corner at 26.5°N, 40.0°W
  • Western Boundary (WB) array defined as a box with the south-east corner at 26.0°N, 77.5°W and the north-west corner at 27.5°N, 69.5°W

References

Baehr, J., Hirschi, J., Beismann, J.O. and Marotzke, J. (2004) Monitoring the meridional overturning circulation in the North Atlantic: A model-based array design study. Journal of Marine Research, Volume 62, No 3, pp 283-312.

Baringer, M.O'N. and Larsen, J.C. (2001) Sixteen years of Florida Current transport at 27N Geophysical Research Letters, Volume 28, No 16, pp3179-3182

Bryden, H.L., Johns, W.E. and Saunders, P.M. (2005) Deep Western Boundary Current East of Abaco: Mean structure and transport. Journal of Marine Research, Volume 63, No 1, pp 35-57.

Hirschi, J., Baehr, J., Marotzke J., Stark J., Cunningham S.A. and Beismann J.O. (2003) A monitoring design for the Atlantic meridional overturning circulation. Geophysical Research Letters, Volume 30, No 7, article number 1413 (DOI 10.1029/2002GL016776)


Data Activity or Cruise Information

Cruise

Cruise Name CD177
Departure Date 2005-11-12
Arrival Date 2005-11-29
Principal Scientist(s)Stuart A Cunningham (National Oceanography Centre, Southampton)
Ship RRS Charles Darwin

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification