Metadata Report for BODC Series Reference Number 932350

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

SIMORC data access conditions

The data collated and held at BODC on behalf of the SIMORC project are restricted. However, the data will be available to download from the Official SIMORC Website, as part of the project protocol. The data set will initially include data from the oil companies TOTAL, Shell and BP.

Narrative Documents

Hugrun Seamon Mini Temperature Recorder

The Seamon mini is a submersible sensor that records temperature at user-selected sampling intervals. and stores the data in memory under the control of a microprocessor. The temperature probe is built-in and made of the same material as the housing (plastic or titanium), and is designed to minimize the thermal response time.

This instrument has been superseded by the Starmon mini, manufactured by Star-Oddi.

Specifications

The link to the instrument's specification sheet can be found here Hugrun Seamon Mini TR

BODC Processing

As the originator provided data files containing several deployments, files were split into Matlab files for transfer in order to get one file per deployment and per instrument. Data files created followed the filename format: M/Year(2 digits)/ Month(2 digits)/SEAMON/Depth. Files were split as follows:

These series were reformatted to the internal QXF format using BODC transfer function 415. The following table shows how the variables within the file were mapped to the appropriate BODC parameter codes:

The originator provided data measured at 80 m depth from the mooring deployed in January 1998. This series was not transferred as datacycles were absent values.

Following transfer to QXF, the data were screened using BODC's in-house visualisation software, EDSERPLO. Any data considered as suspect were flagged 'M'.

General Data Screening carried out by BODC

BODC screen both the series header qualifying information and the parameter values in the data cycles themselves.

Header information is inspected for:

• Irregularities such as unfeasible values
• Inconsistencies between related information, for example:
  • Times for instrument deployment and for start/end of data series
  • Length of record and the number of data cycles/cycle interval
  • Parameters expected and the parameters actually present in the data cycles
• Originator's comments on meter/mooring performance and data quality

Documents are written by BODC highlighting irregularities which cannot be resolved.

Data cycles are inspected using time or depth series plots of all parameters. Currents are additionally inspected using vector scatter plots and time series plots of North and East velocity components. These presentations undergo intrinsic and extrinsic screening to detect infeasible values within the data cycles themselves and inconsistencies as seen when comparing characteristics of adjacent data sets displaced with respect to depth, position or time. Values suspected of being of non-oceanographic origin may be tagged with the BODC flag denoting suspect value; the data values will not be altered.

The following types of irregularity, each relying on visual detection in the plot, are amongst those which may be flagged as suspect:

• Spurious data at the start or end of the record.
• Obvious spikes occurring in periods free from meteorological disturbance.
• A sequence of constant values in consecutive data cycles.

If a large percentage of the data is affected by irregularities then a Problem Report will be written rather than flagging the individual suspect values. Problem Reports are also used to highlight irregularities seen in the graphical data presentations.

Inconsistencies between the characteristics of the data set and those of its neighbours are sought and, where necessary, documented. This covers inconsistencies such as the following:

• Maximum and minimum values of parameters (spikes excluded).
• The occurrence of meteorological events.

This intrinsic and extrinsic screening of the parameter values seeks to confirm the qualifying information and the source laboratory's comments on the series. In screening and collating information, every care is taken to ensure that errors of BODC making are not introduced.

Project Information

System of Industry Metocean data for the Offshore and Research Communities (SIMORC)

The EU-funded SIMORC project is a collaborative effort between MARIS (Netherlands), BODC (UK), the International Association of Oil and Gas Producers (OGP) and IOC-IODE to provide a harmonised and quality controlled metocean data set from data collected by oil and gas producers, accessible through the SIMORC protocol.

Data Activity or Cruise Information

Data Activity

SIMORC Mooring Myanmar#1

This particular mooring was deployed on 04/01/1998 and was removed on 26/02/1998. It was set from a subsurface mooring on behalf of TOTAL in Myanmar, Block 8 and consisted of the following instruments.

Where MSL = Mean Sea Level

Related Data Activity activities are detailed in Appendix 1

Fixed Station Information

Fixed Station Information

SIMORC: TOTAL Myanmar Fixed Station Document

This site is part of the TOTAL offshore facility and consists of a drilling location in Block M8, offshore Myanmar.

2 moorings consisting of 4 current meters, 2 ADCPs, 1 WLR and 12 temperature recorders were deployed from a subsurface mooring.

The nominal position of the site is 14° 12' 13''N, 94° 09' 37''E. The water depth is 440 m.

Current data were collected by Fugro Geos on behalf of TOTAL from Myanmar Station as follows:

A CTD cast was done before the recovery of the last mooring.

Where

• CM = Current Meter
• ADCP = Acoustic Doppler Current Profiler
• WLR = Water Level Recorder
• HRCD = Hydrography time series at depth

Related Fixed Station activities are detailed in Appendix 2

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: Myanmar#1

Related series for this Data Activity are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.

Appendix 2: MYANMAR

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.