Metadata Report for BODC Series Reference Number 1285740

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."

Narrative Documents

Niskin Bottle

The Niskin bottle is a device used by oceanographers to collect subsurface seawater samples. It is a plastic bottle with caps and rubber seals at each end and is deployed with the caps held open, allowing free-flushing of the bottle as it moves through the water column.

Standard Niskin

The standard version of the bottle includes a plastic-coated metal spring or elastic cord running through the interior of the bottle that joins the two caps, and the caps are held open against the spring by plastic lanyards. When the bottle reaches the desired depth the lanyards are released by a pressure-actuated switch, command signal or messenger weight and the caps are forced shut and sealed, trapping the seawater sample.

Lever Action Niskin

The Lever Action Niskin Bottle differs from the standard version, in that the caps are held open during deployment by externally mounted stainless steel springs rather than an internal spring or cord. Lever Action Niskins are recommended for applications where a completely clear sample chamber is critical or for use in deep cold water.

Clean Sampling

A modified version of the standard Niskin bottle has been developed for clean sampling. This is teflon-coated and uses a latex cord to close the caps rather than a metal spring. The clean version of the Levered Action Niskin bottle is also teflon-coated and uses epoxy covered springs in place of the stainless steel springs. These bottles are specifically designed to minimise metal contamination when sampling trace metals.

Deployment

Bottles may be deployed singly clamped to a wire or in groups of up to 48 on a rosette. Standard bottles and Lever Action bottles have a capacity between 1.7 and 30 L. Reversing thermometers may be attached to a spring-loaded disk that rotates through 180° on bottle closure.

Nutrients for cruises RRS Challenger CH108A, CH108C and CH115A.

Document History

Converted from CDROM documentation.

Content of data series

Data Originator

Dr Peter Statham SOES, Southampton Oceanography Centre

NB Users interested in nutrient data should be aware that there are continuous surface nutrient measurements for each RRS Challenger cruise included in the underway data set.

Sampling strategy and methodology

Water samples were collected from either the ship's non-toxic pumped seawater supply or from water bottles on the CTD rosette. The samples were filtered immediately through tared GF/F filters and both the filters and filtrate were stored frozen until analysed back at the laboratory.

The filtrates were analysed using manual colorimetric methods (Parsons et al., 1984) for orthophosphate. Total phosphate was determined by the same method on sample aliquots in which the organic phosphorous had been oxidised to phosphate. Further details are given in Ormaza-Gonzalez and Statham (1996).

References

Balls, P.B. and Laslett, R., 1991. A simple estuarine water sampler suitable for trace metals and other constituents. Estuarine Coastal and Shelf Science 33, 623-629.

Mantoura, R.F.C. and Woodward, E.M.S., 1983. Optimisation of the indophenol blue method for the automated determination of ammonia in estuarine waters. Estuarine, Coastal and Shelf Science, 17, 219-224.

Morris, A.W., Howland, R.J.M. and Bale, A.J. (1978). A filtration unit for use with continuous autoanalytical systems applied to highly turbid waters. Est. Coast. Mar. Sci. 6, 105-109.

Ormaza-Gonzalez, F.I. and Statham, P.J., 1996. A comparison of methods for the determination of dissolved and particulate phosphorus in natural waters. Water Research, 30(1), 2739-2747.

Parsons, T.R., Maita, Y. and Lalli, C.M., 1984. A Manual of Chemical and Biological Methods for Seawater Analysis. Pergamon Press.

Willason S.W. and Johnson, K.S, 1986. A rapid, highly sensitive technique for the determination of ammonia in sea water. Mar. Biol. 91, 285-290.

Project Information

LOIS River-Atmosphere-Coast Study (LOIS - RACS)

Introduction

The Land-Ocean Interaction Study (LOIS) was a NERC research programme designed to study processes in the coastal zone. The Rivers, Atmosphere and Coasts Study (RACS) was a major component of LOIS that looked at land-sea interactions in the coastal zone and the major exchanges (physical, chemical and biological) between rivers and estuaries and the atmosphere. The study focused on the east coast of the UK from the Wash to the Tweed.

RACS included several sub-components

• BIOTA - A study of salt marshes of the Humber and Wash
• RACS (A) - An atmospheric chemistry study looking at air mass changes from the Wash into East Anglia
• RACS (C) - A study of the estuaries, coasts and coastal waters between Great Yarmouth and Berwick upon Tweed.
  1. The coastal oceangraphic survey
  2. The Humber estuarine study
  3. The Tweed estuarine study
  4. The Holderness experiment
• RACS (R) - A study of rivers that drain into the North Sea

RACS (A) was coordinated by the University of East Anglia and RACS (C) by the Plymouth Marine Laboratory.

RACS (A)

The bulk of the RACS (A) data set was collected during two field campaigns in the winter (October/November) of 1994 and the summer (May/June) of 1995. During these campaigns data were collected continuously from the University of East Anglia Atmospheric Observatory at Weybourne on the north Norfolk coast. An instrumented vessel was stationed offshore to provide a second sampling site to allow changes in a given air mass to be monitored. The Imperial College Jetstream research aircraft made one flight during each campaign to provide a link between the two surface stations. The Jetstream made four additional flights in 1996 and 1997.

RACS (C)

The coastal oceanographic survey

The coastal oceanographic data set was collected during a series of 17 RRS Challenger cruise legs. Most cruises covered two survey grids. One from Great Yarmouth to the Humber designed around the distribution of the sandbanks and a second simple zig-zag grid from the Humber to Berwick on Tweed. A large number of anchor stations, usually over one or two tidal cycles, were worked in the area of the Humber mouth or the Holderness coast.

The Humber estuarine study

The Humber estuarine data set was collected during a series of 33 campaigns on the Environment Agency vessels Sea Vigil and Water Guardian in the Humber, Trent and Ouse river systems at approximately monthly intervals between June 1993 and December 1996. Each campaign consisted of two or three one-day cruises. The tracks covered the estuary from the tidal limits of both Trent and Ouse to Spurn Point. Instrumental and sample data are available from a series of fixed stations that were sampled during every campaign.

The Tweed estuarine study

The Tweed estuarine data set was collected during a series of 13 campaigns using RV Tamaris in association with a rigid inflatable vessel at approximately monthly intervals between July 1996 and July 1997. Each campaign covered the tidal reaches of the River Tweed.

The Holderness experiment

The Holderness Experiment was designed to monitor the process of sediment transport along the Holderness coastline. It consisted of three moored instrument deployments during the winters of 1993-1994, 1994-1995 and 1995-1996. Mooring platforms were deployed at eight stations along two lines off the Holderness coast. A northerly and a southerly line of four stations each were used (N1 - N4 and S1 to S4) with the lowest numbers being inshore. Both lines were approximately perpendicular to the coast, although the S4 station lay to the south of the S line, off Spurn Head.

Data Activity or Cruise Information

Data Activity

BODC Sample Metadata Report for CH115A_CTD_CP116

Please note:the supplied parameters may not have been sampled from all the bottle firings described in the table above. Cross-match the Sample Reference Number above against the SAMPRFNM value in the data file to identify the relevant metadata.

Related Data Activity activities are detailed in Appendix 1

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

No Fixed Station Information held for the Series

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: CH115A_CTD_CP116

Related series for this Data Activity are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.