Metadata Report for BODC Series Reference Number 1876718

• Metadata Summary

• Problem Reports

• Data Access Policy

• Data Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Western Boundary Time Series (WBTS) data access

The data from the Western Boundary Time Series (WBTS) project are freely available to all. The project scientists would appreciate it if the following acknowledgment was included in any publications that use this data;

"The Western Boundary Time Series data are made freely available on the Atlantic Oceanographic and Meteorological Laboratory web page (www.aoml.noaa.gov/phod/wbts/) and are funded by the NOAA Climate Observation Division."

Data Policy

Western Boundary Time Series (WBTS) data access

The data from the Western Boundary Time Series (WBTS) project are freely available to all. The project scientists would appreciate it if the following acknowledgment was included in any publications that use this data;

"The Western Boundary Time Series data are made freely available on the Atlantic Oceanographic and Meteorological Laboratory web page (www.aoml.noaa.gov/phod/wbts/) and are funded by the NOAA Climate Observation Division."

Narrative Documents

Sea-Bird Dissolved Oxygen Sensor SBE 43 and SBE 43F

The SBE 43 is a dissolved oxygen sensor designed for marine applications. It incorporates a high-performance Clark polarographic membrane with a pump that continuously plumbs water through it, preventing algal growth and the development of anoxic conditions when the sensor is taking measurements.

Two configurations are available: SBE 43 produces a voltage output and can be incorporated with any Sea-Bird CTD that accepts input from a 0-5 volt auxiliary sensor, while the SBE 43F produces a frequency output and can be integrated with an SBE 52-MP (Moored Profiler CTD) or used for OEM applications. The specifications below are common to both.

Specifications

Further details can be found in the manufacturer's specification sheet.

Sea-Bird Electronics SBE 911 and SBE 917 series CTD profilers

The SBE 911 and SBE 917 series of conductivity-temperature-depth (CTD) units are used to collect hydrographic profiles, including temperature, conductivity and pressure as standard. Each profiler consists of an underwater unit and deck unit or SEARAM. Auxiliary sensors, such as fluorometers, dissolved oxygen sensors and transmissometers, and carousel water samplers are commonly added to the underwater unit.

Underwater unit

The CTD underwater unit (SBE 9 or SBE 9 plus) comprises a protective cage (usually with a carousel water sampler), including a main pressure housing containing power supplies, acquisition electronics, telemetry circuitry, and a suite of modular sensors. The original SBE 9 incorporated Sea-Bird's standard modular SBE 3 temperature sensor and SBE 4 conductivity sensor, and a Paroscientific Digiquartz pressure sensor. The conductivity cell was connected to a pump-fed plastic tubing circuit that could include auxiliary sensors. Each SBE 9 unit was custom built to individual specification. The SBE 9 was replaced in 1997 by an off-the-shelf version, termed the SBE 9 plus, that incorporated the SBE 3 plus (or SBE 3P) temperature sensor, SBE 4C conductivity sensor and a Paroscientific Digiquartz pressure sensor. Sensors could be connected to a pump-fed plastic tubing circuit or stand-alone.

Temperature, conductivity and pressure sensors

The conductivity, temperature, and pressure sensors supplied with Sea-Bird CTD systems have outputs in the form of variable frequencies, which are measured using high-speed parallel counters. The resulting count totals are converted to numeric representations of the original frequencies, which bear a direct relationship to temperature, conductivity or pressure. Sampling frequencies for these sensors are typically set at 24 Hz.

The temperature sensing element is a glass-coated thermistor bead, pressure-protected inside a stainless steel tube, while the conductivity sensing element is a cylindrical, flow-through, borosilicate glass cell with three internal platinum electrodes. Thermistor resistance or conductivity cell resistance, respectively, is the controlling element in an optimized Wien Bridge oscillator circuit, which produces a frequency output that can be converted to a temperature or conductivity reading. These sensors are available with depth ratings of 6800 m (aluminium housing) or 10500 m (titanium housing). The Paroscientific Digiquartz pressure sensor comprises a quartz crystal resonator that responds to pressure-induced stress, and temperature is measured for thermal compensation of the calculated pressure.

Additional sensors

Optional sensors for dissolved oxygen, pH, light transmission, fluorescence and others do not require the very high levels of resolution needed in the primary CTD channels, nor do these sensors generally offer variable frequency outputs. Accordingly, signals from the auxiliary sensors are acquired using a conventional voltage-input multiplexed A/D converter (optional). Some Sea-Bird CTDs use a strain gauge pressure sensor (Senso-Metrics) in which case their pressure output data is in the same form as that from the auxiliary sensors as described above.

Deck unit or SEARAM

Each underwater unit is connected to a power supply and data logging system: the SBE 11 (or SBE 11 plus) deck unit allows real-time interfacing between the deck and the underwater unit via a conductive wire, while the submersible SBE 17 (or SBE 17 plus) SEARAM plugs directly into the underwater unit and data are downloaded on recovery of the CTD. The combination of SBE 9 and SBE 17 or SBE 11 are termed SBE 917 or SBE 911, respectively, while the combinations of SBE 9 plus and SBE 17 plus or SBE 11 plus are termed SBE 917 plus or SBE 911 plus.

Specifications

Specifications for the SBE 9 plus underwater unit are listed below:

Further details can be found in the manufacturer's specification sheet.

EN570 Originator's CTD Data Processing

Sampling Strategy

A total of 44 CTD stations were completed during cruise EN570 to produce full depth vertical profiles of temperature, salinity, and dissolved oxygen concentrations. CTD casts were performed at stations along the 26.5N transect towards Abaco Island, a section across the North West Providence Channel, and the Florida Strait. CTD casts at stations 1 and 30 were performed for calibration purposes.

Data Acquisition and Initial Processing

The data were processed using Sea-Bird SBE v7.21h and AOML Matlab processing software. The conductivity and dissolved oxygen sensors were calibrated against independent discrete samples taken from water bottles attached to the CTD frame, and were found to be in agreement.

The processed data were supplied to BODC for banking.

References

Johns, W. E. (2015) RV Endeavor Cruise EN-570, 3-19 Oct, 2015. RAPID/MOCHA Program Cruise Report Port Everglades, FL, USA, 11pp.

Hooper, J. A. and Baringer, M. O. (2016) Hydrographic Measurements Collected Aboard the UNOLS Ship R/V Endeavor, 3 October-20 October 2015: Western Boundary Time Series Cruise EN570 (AB1510). NOAA Data Report OAR AOML-54, Miami, FL, USA, 188pp.

WBTS Hydrography BODC data processing

The data arrived at BODC in ASCII files representing individual CTD casts. The data contained in the files are the downcast data averaged to a 1db pressure grid. The casts were reformatted to BODC's internal NetCDF format. The following table shows the mapping of variables within the ASCII files to appropriate BODC parameter codes

The reformatted data were visualised using the in-house EDSERPLO software. Suspect data were marked by adding an appropriate quality control flag, and missing data marked by setting both the data to an appropriate value and setting the quality control flag.

Detailed metadata and documentation were compiled and linked to the data.

Project Information

Western Boundary Time Series (WBTS) in the Atlantic Ocean

Introduction

Users of these data are referred to the Western Boundary Time Series (WBTS) in the Atlantic Ocean website for more information. The following text has been taken from the website.

Scientific Rationale

Climate models have shown that variations of the transport of the Meridional Overturning Cell (MOC) in the Atlantic Ocean have significant impacts on the climate at both the national and global level. In the subtropical North Atlantic, the meridional overturning circulation consists primarily of two western boundary components: the northward flowing Gulf Stream and the southward flowing Deep Western Boundary Current.

The Gulf Stream is the strong surface intensified flow along the east coast of the United States that brings warm waters of tropical, including carbon, nutrients and fish, origin along the eastern seaboard of the United States. It supplies warm waters along the coast that impact a multitude of important climate phenomena including hurricane intensification, winter storm formation and moderate European weather. The Gulf Stream includes the bulk of what we call the upper limb of the thermohaline circulation in the subtropical Atlantic, in addition to a strong wind-driven flow. As the Gulf Stream flows northward, it loses heat to the atmosphere until eventually in the subpolar North Atlantic some of it becomes cold enough to sink to the bottom of the ocean. This cold deep water then returns southward along the continental slope of the eastern United States as the Deep Western Boundary Current, completing the circuit of the overturning circulation.

Off the coast of Florida, the Gulf Stream is referred to as the Florida Current and is fortuitously confined within the limited geographic channel between Florida and the Bahamas Islands, thus making a long-term observing system cost effective and sustainable. Similarly, the Deep Western Boundary Current is located within several hundred miles to the east of the Abaco Island, Grand Bahamas. The convenient geometry of the Bahamas Island chain thus allows an effective choke point for establishing a long term monitoring program of this deep limb of the overturning circulation.

Overview

The project consists of several components to monitor the Western Boundary currents in the subtropical Atlantic:

• Florida Cable Transport Time Series - Measuring the voltage difference across the Straits of Florida using submerged submarine telephone cables
• Florida Current Cruises - Eight small-boat cruises involving dropsonde and XBT measurements and four research vessel cruises using CTD and LADCP measurements are taken annually across the Florida Current.
• Deep Western Boundary Current Hydrography - Two hydrographic cruises per year across the Deep Western Boundary Current (DWBC) area, east of Abaco Island, to measure water mass properties and transports.
• Deep Western Boundary Current Transport Time Series - A monitoring system for the Deep Western Boundary Current using inverted echo sounders, bottom pressure gauges, and one deep current meter

Deep Western Boundary Current (DWBC) Hydrography

Introduction

Users of these data are referred to the Deep Western Boundary Current (DWBC) Hydrography website for more information. The following text has been taken from the website.

Scientific Rationale

Climate models have shown that variations of the transport of the Meridional Overturning Cell (MOC) in the Atlantic Ocean have significant impacts on the climate at both the national and global level. In the subtropical North Atlantic, the meridional overturning circulation consists primarily of two western boundary components: the northward flowing Gulf Stream and the southward flowing Deep Western Boundary Current.

The Gulf Stream is the strong surface intensified flow along the east coast of the United States that brings warm waters of tropical, including carbon, nutrients and fish, origin along the eastern seaboard of the United States. It supplies warm waters along the coast that impact a multitude of important climate phenomena including hurricane intensification, winter storm formation and moderate European weather. The Gulf Stream includes the bulk of what we call the upper limb of the thermohaline circulation in the subtropical Atlantic, in addition to a strong wind-driven flow. As the Gulf Stream flows northward, it loses heat to the atmosphere until eventually in the subpolar North Atlantic some of it becomes cold enough to sink to the bottom of the ocean. This cold deep water then returns southward along the continental slope of the eastern United States as the Deep Western Boundary Current, completing the circuit of the overturning circulation.

Off the coast of Florida, the Gulf Stream is referred to as the Florida Current and is fortuitously confined within the limited geographic channel between Florida and the Bahamas Islands, thus making a long-term observing system cost effective and sustainable. Similarly, the Deep Western Boundary Current is located within several hundred miles to the east of the Abaco Island, Grand Bahamas. The convenient geometry of the Bahamas Island chain thus allows an effective choke point for establishing a long term monitoring program of this deep limb of the overturning circulation.

Overview

Over the past 20 years a variety of snapshot sections and time series moorings have been placed along the continental slope east of Abaco Island, Grand Bahamas, in order to monitor variability of the transport carried by the Deep Western Boundary Current. The Abaco time series began in August 1984 when the NOAA Subtropical Atlantic Climate Studies Program extended its Straits of Florida program to include measurements of western boundary current transports and water mass properties east of Abaco Island, Grand Bahamas. Since 1986, over 20 hydrographic sections have been completed east of Abaco, most including direct velocity observations, and salinity and oxygen bottle samples. Many sections have also included carbon, chlorofluorocarbon, and other tracers.

Stations frequently visited during the Deep Western Boundary Current Hydrography cruise

The repeated hydrographic and tracer sampling at Abaco has established a high-resolution record of water mass properties in the Deep Western Boundary Current at 26N. Events such as the intense convection period in the Labrador Sea and the renewal of classical Labrador Sea Water in the 1980's are clearly reflected in the cooling and freshening of the Deep Western Boundary Current waters off Abaco, and the arrival of a strong chlorofluorocarbon pulse approximately 10 years later. This data set is unique in that it is not just a single time series site but a transport section, of which very few are available in the ocean that approach a decade in length.

These continued time series observations at Abaco are seen as serving three main purposes for climate variability studies:

• Monitoring of the DWBC for water mass and transport signatures related to changes in the strengths and regions of high latitude water mass formation in the North Atlantic for the ultimate purpose of assessing rapid climate change.
• Serving as a western boundary endpoint of a subtropical meridional overturning circulation (MOC)/heat flux monitoring system designed to measure the interior dynamic height difference across the entire Atlantic basin and its associated baroclinic heat transport.
• Monitoring the intensity of the Antilles Current as an index (together with the Florida Current) of interannual variability in the strength of the subtropical gyre.

Data Activity or Cruise Information

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

No Fixed Station Information held for the Series

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle: