Metadata Report for BODC Series Reference Number 405727
No Problem Report Found in the Database
Public domain data
These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.
The recommended acknowledgment is
"This study uses data from the data source/organisation/programme, provided by the British Oceanographic Data Centre and funded by the funding body."
Neil Brown Smart Conductivity, Temperature and Depth profiler
The Smart CTD was developed by WHOI, Neil Brown Instrument Systems and MIT and consists of an internally recording CTD which can be programmable to accommodate various sampling schemes. The data retrieval is done via connectors to a computer, where it is digitally logged.
This instrument was designed to be used with minimal technical expertise and to be replaced if problems arise, rather than being repaired at sea.
FRV Scotia 0689S CTD Data Documentation
Documentation for data collected on FRV Scotia cruise 0689S CTD (21 June 1989 - 30 June 1989) by Fisheries Research Services, Aberdeen, UK.
The temperature and salinity data were collected using a Neil Brown Instrument Systems (NBIS) CTD instrument which was calibrated using bottle samples and thermometer readings to produce the following equations:
T(cal) = T(obs)
C(cal) = C(obs)
For further information contact:
George Slesser/Bill Turrell
FRS, Marine Laboratory
PO Box 101
Aberdeen AB11 9DB
G.Slesser@marlab.ac.uk or email@example.com
General Data Screening carried out by BODC
BODC screen both the series header qualifying information and the parameter values in the data cycles themselves.
Header information is inspected for:
- Irregularities such as unfeasible values
- Inconsistencies between related information, for example:
- Times for instrument deployment and for start/end of data series
- Length of record and the number of data cycles/cycle interval
- Parameters expected and the parameters actually present in the data cycles
- Originator's comments on meter/mooring performance and data quality
Documents are written by BODC highlighting irregularities which cannot be resolved.
Data cycles are inspected using time or depth series plots of all parameters. Currents are additionally inspected using vector scatter plots and time series plots of North and East velocity components. These presentations undergo intrinsic and extrinsic screening to detect infeasible values within the data cycles themselves and inconsistencies as seen when comparing characteristics of adjacent data sets displaced with respect to depth, position or time. Values suspected of being of non-oceanographic origin may be tagged with the BODC flag denoting suspect value; the data values will not be altered.
The following types of irregularity, each relying on visual detection in the plot, are amongst those which may be flagged as suspect:
- Spurious data at the start or end of the record.
- Obvious spikes occurring in periods free from meteorological disturbance.
- A sequence of constant values in consecutive data cycles.
If a large percentage of the data is affected by irregularities then a Problem Report will be written rather than flagging the individual suspect values. Problem Reports are also used to highlight irregularities seen in the graphical data presentations.
Inconsistencies between the characteristics of the data set and those of its neighbours are sought and, where necessary, documented. This covers inconsistencies such as the following:
- Maximum and minimum values of parameters (spikes excluded).
- The occurrence of meteorological events.
This intrinsic and extrinsic screening of the parameter values seeks to confirm the qualifying information and the source laboratory's comments on the series. In screening and collating information, every care is taken to ensure that errors of BODC making are not introduced.
No Project Information held for the Series
|Bill Turrell (Scottish Office Agriculture and Fisheries Department Aberdeen Marine Laboratory)
Complete Cruise Metadata Report is available here
No Fixed Station Information held for the Series
The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:
|Below detection limit
|In excess of quoted value
|Taxonomic flag for affinis (aff.)
|Beginning of CTD Down/Up Cast
|Taxonomic flag for confer (cf.)
|End of CTD Down/Up Cast
|Non-taxonomic biological characteristic uncertainty
|Taxonomic flag for single species (sp.)
|Improbable value - unknown quality control source
|Improbable value - originator's quality control
|Improbable value - BODC quality control
|Improbable value - user quality control
|no quality control
|probably good value
|probably bad value
|value below detection
|value in excess
|value phenomenon uncertain
|value below limit of quantification