Metadata Report for BODC Series Reference Number 572102

Metadata Summary
Problem Reports
Data Access Policy
Narrative Documents
Project Information
Data Activity or Cruise Information
Fixed Station Information
BODC Quality Flags
SeaDataNet Quality Flags

Metadata Summary

Data Description

Data Category

CTD or STD cast

Instrument Type

Name	Categories
Sea-Bird SBE 19 SEACAT CTD	CTD; water temperature sensor; salinity sensor

Instrument Mounting

research vessel

Originating Country

United Kingdom

Originator

Originating Organization

Fisheries Research Services Aberdeen Marine Laboratory (now Marine Scotland Aberdeen Marine Laboratory)

Processing Status

banked

Online delivery of data

Download available - Ocean Data View (ODV) format

Project(s)

Data Identifiers

Originator's Identifier	SC04/01/0176
BODC Series Reference	572102

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm)	2001-03-06 17:35
End Time (yyyy-mm-dd hh:mm)	-
Nominal Cycle Interval	1.0 decibars

Spatial Co-ordinates

Latitude	53.48650 N ( 53° 29.2' N )
Longitude	4.17600 W ( 4° 10.6' W )
Positional Uncertainty	Unspecified
Minimum Sensor or Sampling Depth	5.95 m
Maximum Sensor or Sampling Depth	38.65 m
Minimum Sensor or Sampling Height	5.35 m
Maximum Sensor or Sampling Height	38.04 m
Sea Floor Depth	44.0 m
Sea Floor Depth Source	-
Sensor or Sampling Distribution	Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum	Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum	Instantaneous - Depth measured below water line or instantaneous water body surface

Parameters

BODC CODE	Rank	Units	Title
PRESPR01	1	Decibars	Pressure (spatial coordinate) exerted by the water body by profiling pressure sensor and correction to read zero at sea level
TEMPST01	1	Degrees Celsius	Temperature of the water body by CTD or STD

Definition of Rank
Rank 1 is a one-dimensional parameter Rank 2 is a two-dimensional parameter Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Public domain data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

The recommended acknowledgment is

"This study uses data from the data source/organisation/programme, provided by the British Oceanographic Data Centre and funded by the funding body."

Narrative Documents

Sea-Bird SBE 19 and SBE 19plus SEACAT Profiler CTDs

The SBE 19 SEACAT Profiler is a self-contained, battery powered, pumped CTD system designed to measure conductivity, temperature, and pressure in marine or fresh water environments to depths of 10,500 meters. It was replaced by the SBE 19plus model in 2001. An updated version of this instrument is the SBE 19plus V2, which incorporates an electronics upgrade and additional features, with six differentially amplified A/D input channels, one RS-232 data input channel, and 64 MB FLASH memory.

The standard CTD unit comes with a plastic housing (rated to 600 m), although this can be replaced by titanium housing for depths up to 7000 m. It is typically used for CTD profiling although a conversion kit is available for mooring deployments. The CTD can also be attached to an SBE 36 CTD Deck Unit and Power/Data Interface Module (PDIM) for real-time operation on single-core armored cable up to 10,000 m.

Specifications

Parameter	SBE 19	SBE 19plus
Temperature	Range: -5 to +35 °C Accuracy: 0.01 °C Resolution: 0.001 °C Calibration: +1 to +32 °C*	Range: -5 to +35 °C Accuracy: 0.005 °C Resolution: 0.0001 °C Calibration: +1 to +32 °C*
Conductivity	Range: 0 to 7 S m^-1 (0 to 70 mmho cm^-1) Accuracy: 0.001 S m^-1 Resolution: 0.0001 S m^-1 Calibration: 0 to 7 S m^-1. Physical calibration over the range 1.4 - 6 S m^-1*	Range: 0 to 9 Sm^-1 Accuracy: 0.0005 Resolution: 0.00005 (most oceanic waters, resolves 0.4 ppm in salinity); 0.00007 (high salinity waters, resolves 0.4 ppm in salinity); 0.00001 (fresh waters, resolves 0.1 ppm in salinity) Calibration: 0 to 9 S m^-1. Physical calibration over the range 1.4 - 6 S m^-1*
Strain gauge pressure sensor	Range: 0 to100, 150, 300, 500, 1000, 1500, 3000, 5000, 10000 or 15000 psia Accuracy: 0.25% of full scale range (100 - 1500 psia); 0.15% of full scale range (3000 - 15000 psia) Resolution: 0.015% of full scale Calibration: 0 to full scale in 20% steps	Range: 0 to 20, 100, 350, 1000, 2000, 3500 or 7000 m Accuracy: 0.1% of full scale range Resolution: 0.002% of full scale range Calibration: ambient pressure to full scale range in 5 steps

Parameter

SBE 19

SBE 19plus

Temperature

Range: -5 to +35 °C

Accuracy: 0.01 °C

Resolution: 0.001 °C

Calibration: +1 to +32 °C*

Range: -5 to +35 °C

Accuracy: 0.005 °C

Resolution: 0.0001 °C

Calibration: +1 to +32 °C*

Conductivity

Range: 0 to 7 S m^-1 (0 to 70 mmho cm^-1)

Accuracy: 0.001 S m^-1

Resolution: 0.0001 S m^-1

Calibration: 0 to 7 S m^-1. Physical calibration over the range 1.4 - 6 S m^-1*

Range: 0 to 9 Sm^-1

Accuracy: 0.0005

Resolution: 0.00005 (most oceanic waters, resolves 0.4 ppm in salinity); 0.00007 (high salinity waters, resolves 0.4 ppm in salinity); 0.00001 (fresh waters, resolves 0.1 ppm in salinity)

Calibration: 0 to 9 S m^-1. Physical calibration over the range 1.4 - 6 S m^-1*

Strain gauge pressure sensor

Range: 0 to100, 150, 300, 500, 1000, 1500, 3000, 5000, 10000 or 15000 psia

Accuracy: 0.25% of full scale range (100 - 1500 psia); 0.15% of full scale range (3000 - 15000 psia)

Resolution: 0.015% of full scale

Calibration: 0 to full scale in 20% steps

Range: 0 to 20, 100, 350, 1000, 2000, 3500 or 7000 m

Accuracy: 0.1% of full scale range

Resolution: 0.002% of full scale range

Calibration: ambient pressure to full scale range in 5 steps

*Measurements outside this range may be at slightly reduced accuracy due to extrapolation errors.

Options and accessories

Additional sensors can be attached to the CTD, including:

high accuracy Paroscientific Digiquartz pressure sensor (depth range 0 to 20, 60, 130, 200, 270, 680, 1400, 2000, 4200, 7000 or 10500 m; accuracy 0.02% of full scale; resolution 0.0025% of full scale)
Dissolved Oxygen (SBE 43 DO Sensor)
pH* (SBE 18 pH Sensor or SBE 27 pH/ORP Sensor)
fluorescence
radiance (PAR)
light transmission
optical backscatter (turbidity)

The standard SBE 5M pump may be replaced by an SBE 5P (plastic housing) or 5T (titanium housing) pump for use with dissolved oxygen and/or other pumped sensors. Further details can be found in the manufacturer's SBE 19plus V2 instrument specification or theSBE 19 andSBE 19 plus user guides.

RV Scotia 4/2001 CTD Data Documentation

Instrumentation

The instrument used was a Sea-Bird SBE19 SEACAT.

Details of the sensors on the CTD are:

Manufacturer	Sensor	Serial No.	Manufacturer Cal. Date
Sea-Bird	Pressure	1761	04 Apr 2001
Sea-Bird	Temperature	1761	01 Apr 2001
Sea-Bird	Conductivity	1761	01 Apr 2001

There are no salinity data for this cruise as the conductivity sensor was malfunctioning during the entire cruise period.

The following temperature calibration has been applied:

T(cal) = T(obs)

Information

For further information, contact George Slesser
Ocean Climate Group
FRS, Marine Laboratory Aberdeen
PO Box 101
Victoria Road
Aberdeen AB11 9DB
G.Slesser@marlab.ac.uk

Project Information

No Project Information held for the Series

Data Activity or Cruise Information

Cruise

Cruise Name	0401S
Departure Date	2001-02-27
Arrival Date	2001-03-13
Principal Scientist(s)	Kenneth A Coull (Fisheries Research Services Aberdeen Marine Laboratory)
Ship	FRV Scotia

Complete Cruise Metadata Report is available here

Fixed Station Information

No Fixed Station Information held for the Series

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag	Description
Blank	Unqualified
<	Below detection limit
>	In excess of quoted value
A	Taxonomic flag for affinis (aff.)
B	Beginning of CTD Down/Up Cast
C	Taxonomic flag for confer (cf.)
D	Thermometric depth
E	End of CTD Down/Up Cast
G	Non-taxonomic biological characteristic uncertainty
H	Extrapolated value
I	Taxonomic flag for single species (sp.)
K	Improbable value - unknown quality control source
L	Improbable value - originator's quality control
M	Improbable value - BODC quality control
N	Null value
O	Improbable value - user quality control
P	Trace/calm
Q	Indeterminate
R	Replacement value
S	Estimated value
T	Interpolated value
U	Uncalibrated
W	Control value
X	Excessive difference

SeaDataNet Quality Control Flags