Search the data

Metadata Report for BODC Series Reference Number 649388


Metadata Summary

Data Description

Data Category Currents -subsurface Eulerian
Instrument Type Acoustic doppler current profiler
Instrument Mounting lowered unmanned submersible
Originating Country United Kingdom
Originator -
Originating Organization Southampton Oceanography Centre (now National Oceanography Centre, Southampton)
Processing Status QC in progress
Online delivery of data Download not available
Project(s) Marine Productivity
 

Data Identifiers

Originator's Identifier B14544
BODC Series Reference 649388
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2002-05-15 22:26
End Time (yyyy-mm-dd hh:mm) 2002-05-15 23:46
Nominal Cycle Interval 1.54 seconds
 

Spatial Co-ordinates

Latitude 64.54749 N ( 64° 32.8' N )
Longitude 34.21965 W ( 34° 13.2' W )
Positional Uncertainty 0.0 to 0.01 n.miles
Minimum Sensor or Sampling Depth 9.75 m
Maximum Sensor or Sampling Depth 1467.09 m
Minimum Sensor or Sampling Height -
Maximum Sensor or Sampling Height -
Sea Floor Depth -
Sea Floor Depth Source -
Sensor or Sampling Distribution Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum -
 

Parameters

BODC CODERankUnitsTitle
DISTTRAN0MetresDistance (from transducer along measurement axis)
AADYAA011DaysDate (time from 00:00 01/01/1760 to 00:00 UT on day)
AAFDZZ011DaysTime (time between 00:00 UT and timestamp)
ACYCAA011DimensionlessSequence number
PRESPR011DecibarsPressure (spatial coordinate) exerted by the water body by profiling pressure sensor and correction to read zero at sea level
ACBSA6002DecibelsAcoustic backscatter (absolute) in the water body by 600kHz broadband acoustic doppler current profiler (ADCP) and calibration using protocols of Deines (1999)

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."


Narrative Documents

RRS Discovery 262 600khz Lowered ADCP (LADCP)- Absolute backscatter

Deployment and originators processing

The instrument setup is listed in the following table.

Frequency of instrument (kHz) 600
Number of bins: 16
Beam angle 20.0
Number of pings per ensemble 1
Bin length (cm) 800
Blank before transmit (cm) 500

Absolute backscatter coefficient was calculated by the method of Deines (1990). The coefficients used are listed in the table below.

Coefficient  
Alpha 0.153
C -141.4
PdbW 15.4
Rayliegh distance 2.9

The LADCP deployments are listed in the following table

Station No. Status Comments
14351 Failed  
14361 Processed  
14364 Processed  
14388 Processed  
14401 Processed  
14441 Processed Shallow(bad)
14458 Processed  
14470 Failed  
14486 Processed  
14498 Processed  
14508 Processed  
14511 Processed  
14517 Processed Shallow(bad)
14523 Failed  
14532 Processed  
14534 Processed  
14536 Processed  
14544 Processed  
14553 Processed Shallow(bad)
14561 Processed Shallow(bad)
14567 Processed  
14569 Processed  
14577 Processed  
14584 Processed  
14592 Processed  
14604 Processed  
14611 Processed  
14616 Processed  
14626 Processed  
14629 Failed  
14634 Processed  
14644 Processed  
14647 Processed  
14652 Failed  
14672 Processed  

BODC processing

A total of 31 station files where submitted to BODC. The Data were supplied in Matlab binary format. The following variables were transferred to BODC QXF format. A large number of additional variables, including CTD and navigation data, were also present in the files. These were not transferred.

Description Units Originators variable
Pressure Decibars d.z
Absolute backscatter (MVBS) Decibels d.mvbs
Distance from transducer Metres d.zd

Screening and Data quality

The data have been visually screened for obvious problems using the BODC XERPLO software. No significant problems were detected.

References

RDI, (1990). Calculating Absolute Backscatter. Technical bulletin ADCP-90-04, R D Instruments, San Diego, CA, USA.


Project Information

Marine Productivity programme (MarProd)

The Marine Productivity programme (MarProd) was a Thematic Programme of the Natural Environment Research Council. It was funded for a period of five years starting in 2000. Its main goal was "to develop coupled modelling and observation systems for the pelagic ecosystem, with emphasis on physical factors affecting zooplankton dynamics" with the following specific objectives:

  • To identify the dominant spatial and temporal scales of physical parameters and zooplankton population dynamics, by observation, modelling and retrospective analysis

  • To parameterise the critical processes governing zooplankton dynamics by observations and experiments

  • To construct and validate spatially explicit models of zooplankton and their food and predators, capable of resolving short term changes in population structure

  • To provide data for model validation by developing and applying new interdisciplinary techniques to a wide spectrum of biological and physical parameters

  • To develop a database and information system for historic and new data and models.

The programme was composed of two phases: Phase 1 projects (2000-2002) focused on the use of historical datasets and existing biological models, complemented by laboratory experiments and remote-sensing analyses to gain a better understanding of the dynamics of zooplankton populations in shelf seas. The main, field-based Phase 2 of the programme (2001-2005) focused on the open ocean. The fieldwork phase took place between November 2001 and December 2002 and consisted of four surveys in the northern North Atlantic in early winter 2001 and 2002, and in spring and summer 2002.

MarProd was a major UK contribution to the international Global Ocean Ecosystem Dynamics project (GLOBEC).


Data Activity or Cruise Information

Cruise

Cruise Name D262
Departure Date 2002-04-18
Arrival Date 2002-05-26
Principal Scientist(s)Kelvin Richards (University of Southampton School of Ocean and Earth Science)
Ship RRS Discovery

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification