Search the data

Metadata Report for BODC Series Reference Number 666496


Metadata Summary

Data Description

Data Category Currents -subsurface Eulerian
Instrument Type
NameCategories
Teledyne RDI Ocean Surveyor 75 kHz vessel-mounted ADCP  current profilers
Instrument Mounting research vessel
Originating Country United Kingdom
Originator Prof Kelvin Richards
Originating Organization University of Southampton School of Ocean and Earth Science
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) Marine Productivity
 

Data Identifiers

Originator's Identifier SUR26208
BODC Series Reference 666496
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2002-04-25 08:15
End Time (yyyy-mm-dd hh:mm) 2002-04-25 08:31
Nominal Cycle Interval 120.0 seconds
 

Spatial Co-ordinates

Southernmost Latitude 64.19633 N ( 64° 11.8' N )
Northernmost Latitude 64.20183 N ( 64° 12.1' N )
Westernmost Longitude 23.27917 W ( 23° 16.8' W )
Easternmost Longitude 23.17450 W ( 23° 10.5' W )
Positional Uncertainty 0.0 to 0.01 n.miles
Minimum Sensor or Sampling Depth 16.0 m
Maximum Sensor or Sampling Depth 960.0 m
Minimum Sensor or Sampling Height -
Maximum Sensor or Sampling Height -
Sea Floor Depth -
Sea Floor Depth Source -
Sensor or Sampling Distribution Sensor fixed with measurements made at multiple depths within a fixed range (e.g. ADCP) - The sensor is at a fixed depth, but measurements are made remotely from the sensor over a range of depths (e.g. ADCP measurements)
Sensor or Sampling Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum -
 

Parameters

BODC CODERankUnitsTitle
DBINAA010MetresDepth (spatial coordinate) of ADCP bin relative to water surface {bin depth} in the water body
AADYAA011DaysDate (time from 00:00 01/01/1760 to 00:00 UT on day)
AAFDZZ011DaysTime (time between 00:00 UT and timestamp)
ALATGP011DegreesLatitude north relative to WGS84 by unspecified GPS system
ALONGP011DegreesLongitude east relative to WGS84 by unspecified GPS system
ASAMAS012DecibelsSignal return amplitude from the water body by shipborne acoustic doppler current profiler (ADCP)
LCEWAS012Centimetres per secondEastward velocity of water current (Eulerian measurement) in the water body by shipborne acoustic doppler current profiler (ADCP)
LCNSAS012Centimetres per secondNorthward velocity of water current (Eulerian measurement) in the water body by shipborne acoustic doppler current profiler (ADCP)
LERRAS012Centimetres per secondError velocity of water current in the water body by shipborne acoustic doppler current profiler (ADCP)
LRZAAS012Centimetres per secondUpward velocity of water current in the water body by shipborne acoustic doppler current profiler (ADCP)
PCGDAP012PercentAcceptable proportion of acoustic signal returns {percent good} from the water body by acoustic doppler current profiler (ADCP)

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database

RRS Discovery 262 75kHz VMADCP

Deployment and originator's processing

Two RDI Vessel-Mounted Acoustic Doppler Current Profilers (VM-ADCPs) were operated on Discovery 262; the 150kHz VM-ADCP and the 75 kHz Phased Array instrument (Ocean Surveyor) that had been fitted immediately prior to FISHES (Discovery 253, May-June 2001). The 150 kHz ADCP is mounted in the hull 1.75 m to port of the keel, 33 m aft of the bow at the waterline and at an approximate depth of 5 m. The 75 kHz ADCP is mounted in a second well in the hull, but 4.15 m forward and 2.5 m to starboard of the 150 kHz well.

BODC processing

A total of 38 files were submitted to BODC. The data were supplied in P* binary format. The following variables were transferred to BODC QXF format (a BODC-defined subset of NetCDF and BODC's format for 2 dimensionsal datacycle storage) using transfer process tr339.

BODC Code Description Units Originator's variable
ALATGP01 Latitude degrees lat
ALONGP01 Longitude degrees lon
AADYAA01 Date (time from 00:00 01/01/1760 to 00:00 UT on day) days time
AAFDZZ01 Time (time between 00:00 UT and timestamp) days time
DBINAA01 Bin depth metres bindepth
ASAMAS01 Signal return amplitude decibels ampl
LCEWAS01 Eastward current velocity (Eulerian) cm/s absve
LCNSAS01 Northward current velocity (Eulerian) cm/s absvn
LERRAS01 Current velocity error cm/s velerr
LRZAAS01 Upward current velocity cm/s velvert
PCGDAP01 Percentage good return signal % good

Screening and Data quality

The data have been visually screened for obvious problems using the BODC EDSERPLO software. No significant problems were detected apart a number of short data gaps as follows:

- data gap between 12:00 and 06:00 on 24 April 2002 and 25 April 2002 respectively for all channels

- data gap between 20:00 and 21:00 on 27 April 2002 for all channels

- data gap between 12:00 and 04:00 on 03 May 2002 and 04 May 2002 respectively for all channels

- data gap between 14:00 and 04:00 on 11 May and 12 May for all channels

- data gap between 01:00 and 04:00 on 15 May for current velocities only


Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."


Narrative Documents

RD Instruments- Ocean Surveyor 75kHz Vessel mounted ADCP.

Long-Range Mode
Vertical Resolution Cell Size3 Max. Range (m)1 Precision (cm/s)2
8m 520 - 650 30
16m 560 - 700 17
High-Precision Mode
Vertical Resolution Cell Size3 Max. Range (m)1 Precision (cm/s)2
8m 310 - 430 12
16m 350 - 450 9

1 Ranges at 1 to 5 knots ship speed are typical and vary with situation.
2 Single-ping standard deviation.
3 User's choice of depth cell size is not limited to the typical values specified.

Profile Parameters

  • Velocity long-term accuracy (typical): ±1.0%, ±0.5cm/s
  • Velocity range: -5 to 9m/s
  • # of depth cells: 1 - 128
  • Max ping rate: 0.7

Bottom Track

Maximum altitude (precision <2cm/s): 950m

Echo Intensity Profile

Dynamic range: 80dB
Precision: ±1.5dB

Transducer and Hardware

Beam angle: 30°
Configuration: 4-beam phased array
Communications: RS-232 or RS-422 hex-ASCII or binary output at 1200 - 115,200 baud
Output power: 1000W

Standard Sensors

Temperature (mounted on transducer)

  • Range: -5° to 45°C
  • Precision: ±0.1°C
  • Resolution: 0.03°

Environmental

Operating temperature: -5° to 40°C (-5° to 45°C)*
Storage temperature: -30° to 50°C (-30° to 60°C)*

*later instruments have greater range.

Web Page

Further details can be found on the manufacturer's website or in the specification sheet


Project Information

Marine Productivity programme (MarProd)

The Marine Productivity programme (MarProd) was a Thematic Programme of the Natural Environment Research Council. It was funded for a period of five years starting in 2000. Its main goal was "to develop coupled modelling and observation systems for the pelagic ecosystem, with emphasis on physical factors affecting zooplankton dynamics" with the following specific objectives:

  • To identify the dominant spatial and temporal scales of physical parameters and zooplankton population dynamics, by observation, modelling and retrospective analysis

  • To parameterise the critical processes governing zooplankton dynamics by observations and experiments

  • To construct and validate spatially explicit models of zooplankton and their food and predators, capable of resolving short term changes in population structure

  • To provide data for model validation by developing and applying new interdisciplinary techniques to a wide spectrum of biological and physical parameters

  • To develop a database and information system for historic and new data and models.

The programme was composed of two phases: Phase 1 projects (2000-2002) focused on the use of historical datasets and existing biological models, complemented by laboratory experiments and remote-sensing analyses to gain a better understanding of the dynamics of zooplankton populations in shelf seas. The main, field-based Phase 2 of the programme (2001-2005) focused on the open ocean. The fieldwork phase took place between November 2001 and December 2002 and consisted of four surveys in the northern North Atlantic in early winter 2001 and 2002, and in spring and summer 2002.

MarProd was a major UK contribution to the international Global Ocean Ecosystem Dynamics project (GLOBEC).


Data Activity or Cruise Information

Cruise

Cruise Name D262
Departure Date 2002-04-18
Arrival Date 2002-05-26
Principal Scientist(s)Kelvin Richards (University of Southampton School of Ocean and Earth Science)
Ship RRS Discovery

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification