Metadata Report for BODC Series Reference Number 666588

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

RRS Discovery 262 75kHz VMADCP

Deployment and originator's processing

Two RDI Vessel-Mounted Acoustic Doppler Current Profilers (VM-ADCPs) were operated on Discovery 262; the 150kHz VM-ADCP and the 75 kHz Phased Array instrument (Ocean Surveyor) that had been fitted immediately prior to FISHES (Discovery 253, May-June 2001). The 150 kHz ADCP is mounted in the hull 1.75 m to port of the keel, 33 m aft of the bow at the waterline and at an approximate depth of 5 m. The 75 kHz ADCP is mounted in a second well in the hull, but 4.15 m forward and 2.5 m to starboard of the 150 kHz well.

BODC processing

A total of 38 files were submitted to BODC. The data were supplied in P* binary format. The following variables were transferred to BODC QXF format (a BODC-defined subset of NetCDF and BODC's format for 2 dimensionsal datacycle storage) using transfer process tr339.

Screening and Data quality

The data have been visually screened for obvious problems using the BODC EDSERPLO software. No significant problems were detected apart a number of short data gaps as follows:

- data gap between 12:00 and 06:00 on 24 April 2002 and 25 April 2002 respectively for all channels

- data gap between 20:00 and 21:00 on 27 April 2002 for all channels

- data gap between 12:00 and 04:00 on 03 May 2002 and 04 May 2002 respectively for all channels

- data gap between 14:00 and 04:00 on 11 May and 12 May for all channels

- data gap between 01:00 and 04:00 on 15 May for current velocities only

Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."

Narrative Documents

RD Instruments- Ocean Surveyor 75kHz Vessel mounted ADCP.

¹ Ranges at 1 to 5 knots ship speed are typical and vary with situation.
² Single-ping standard deviation.
³ User's choice of depth cell size is not limited to the typical values specified.

Profile Parameters

• Velocity long-term accuracy (typical): ±1.0%, ±0.5cm/s
• Velocity range: -5 to 9m/s
• # of depth cells: 1 - 128
• Max ping rate: 0.7

Bottom Track

Maximum altitude (precision <2cm/s): 950m

Echo Intensity Profile

Dynamic range: 80dB
Precision: ±1.5dB

Transducer and Hardware

Beam angle: 30°
Configuration: 4-beam phased array
Communications: RS-232 or RS-422 hex-ASCII or binary output at 1200 - 115,200 baud
Output power: 1000W

Standard Sensors

Temperature (mounted on transducer)

• Range: -5° to 45°C
• Precision: ±0.1°C
• Resolution: 0.03°

Environmental

Operating temperature: -5° to 40°C (-5° to 45°C)*
Storage temperature: -30° to 50°C (-30° to 60°C)*

*later instruments have greater range.

Web Page

Further details can be found on the manufacturer's website or in the specification sheet

Project Information

Marine Productivity programme (MarProd)

The Marine Productivity programme (MarProd) was a Thematic Programme of the Natural Environment Research Council. It was funded for a period of five years starting in 2000. Its main goal was "to develop coupled modelling and observation systems for the pelagic ecosystem, with emphasis on physical factors affecting zooplankton dynamics" with the following specific objectives:

• To identify the dominant spatial and temporal scales of physical parameters and zooplankton population dynamics, by observation, modelling and retrospective analysis

• To parameterise the critical processes governing zooplankton dynamics by observations and experiments

• To construct and validate spatially explicit models of zooplankton and their food and predators, capable of resolving short term changes in population structure

• To provide data for model validation by developing and applying new interdisciplinary techniques to a wide spectrum of biological and physical parameters

• To develop a database and information system for historic and new data and models.

The programme was composed of two phases: Phase 1 projects (2000-2002) focused on the use of historical datasets and existing biological models, complemented by laboratory experiments and remote-sensing analyses to gain a better understanding of the dynamics of zooplankton populations in shelf seas. The main, field-based Phase 2 of the programme (2001-2005) focused on the open ocean. The fieldwork phase took place between November 2001 and December 2002 and consisted of four surveys in the northern North Atlantic in early winter 2001 and 2002, and in spring and summer 2002.

MarProd was a major UK contribution to the international Global Ocean Ecosystem Dynamics project (GLOBEC).

Data Activity or Cruise Information

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

No Fixed Station Information held for the Series

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle: