Search the data

Metadata Report for BODC Series Reference Number 756282


Metadata Summary

Data Description

Data Category Bathythermograph -expendable
Instrument Type
NameCategories
Lockheed Martin Sippican T-5 XBT probe  bathythermographs; water temperature sensor; Expendable bathythermographs
Instrument Mounting research vessel
Originating Country United Kingdom
Originator Dr Sophie Fielding
Originating Organization British Antarctic Survey
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) BAS Long Term Monitoring and Survey
 

Data Identifiers

Originator's Identifier T5_00020
BODC Series Reference 756282
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2008-04-22 13:00
End Time (yyyy-mm-dd hh:mm) -
Nominal Cycle Interval 0.7 metres
 

Spatial Co-ordinates

Latitude 53.86917 S ( 53° 52.2' S )
Longitude 37.72767 W ( 37° 43.7' W )
Positional Uncertainty 0.0 to 0.01 n.miles
Minimum Sensor or Sampling Depth 2.0 m
Maximum Sensor or Sampling Depth 1830.5 m
Minimum Sensor or Sampling Height 2476.0 m
Maximum Sensor or Sampling Height 4304.5 m
Sea Floor Depth 4306.5 m
Sea Floor Depth Source GEBCO0801
Sensor or Sampling Distribution Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum Unspecified -
Sea Floor Depth Datum Chart reference - Depth extracted from available chart
 

Parameters

BODC CODERankUnitsTitle
ACYCAA011DimensionlessSequence number
DEPHCV011MetresDepth (spatial coordinate) relative to water surface in the water body by computation from probe free-fall time using unspecified algorithm
SVELVP011Metres per secondSound velocity in the water body by sound velocity profiler
TEMPET011Degrees CelsiusTemperature of the water body by expendable bathythermograph (XBT)

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."


Narrative Documents

Instrument description

Lockheed Martin Sippican T-5 XBT Probe

The Expendable Bathythermograph system uses a sea water ground. As soon as an electrode within the nose of the expendable probe makes contact with the water, the circuit is complete and temperature or sound velocity data can be telemetered to the ship-board data processing equipment. The T-5 XBT Probe can be used within a maximum depth of 1830 m, with a rated ship speed of 6 knots and has a vertical resolution of 65 cm.

Manufacturer specifications can be found here

BODC Processing

The data arrived at BODC in 25 ASCII format files representing the casts taken during JR20080415. Files were reformatted to BODC's internal format (subset of NETCDF) and mapped to appropriate BODC parameter codes:

Originator's Variable Units Description BODC Parameter Code Units Comments
Depth m Depth of instrument DEPHCV01 m -
Sound Velocity ms -1 Velocity of sound through water column SVELVP01 ms -1 -
Temperature °C Temperature of water TEMPET01 °C -

The reformatted data were visualised using the in-house EDSERPLO software. Suspect data were marked by adding an appropriate quality control flag. Missing data values were changed to the missing data value and assigned a BODC data quality flag.

Instrument Description

XBT Unit and Auxiliary Sensors

Probe type T-5
Terminal depth 1830 m
Depth equation Standard
Depth Coeff. 1 0.0
Depth Coeff. 2 6.828
Depth Coeff. 3 -0.00182
Depth Coeff. 4 0.0
Pressure Pt. Correction 100.0%

Project Information

BAS Long Term Monitoring and Survey

Introduction

The Long Term Monitoring and Survey project (LTMS) has been running since the British Antarctic Survey (BAS) was created. This project is one of the BAS core projects, with several groups of scientists collecting various types of data e.g biological, geological, atmospheric, among others.

Data collection is achievable through a wide scope of instruments and platforms, e.g. the Antarctic research stations, autonomous instrument platforms deployed on or from BAS research ships, BAS aircrafts, satellite remote sensing and others.

Scientific Objectives

This project was implemented in order to measure change and variability in the Earth system. Its long term duration allows for the monitoring of processes that could be missed in shorter term studies and experiments. The data collected is also used to check and improve the reliability of models used to stimulate and predict the behavior of the Earth system.

The main objectives are:

  • Topographic survey
  • Geosciences survey
  • Biological survey and monitoring
  • Atmospheric and oceanographic monitoring

Data Availability

The data sets obtained through this project are available to the academic community.


Data Activity or Cruise Information

Cruise

Cruise Name JR20080415 (JR186, JR214, JR222, JR223)
Departure Date 2008-04-15
Arrival Date 2008-05-06
Principal Scientist(s)Paul Provost (National Marine Facilities Sea Systems), Sophie Fielding (British Antarctic Survey)
Ship RRS James Clark Ross

Complete Cruise Metadata Report is available here


Fixed Station Information


No Fixed Station Information held for the Series


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification