Metadata Report for BODC Series Reference Number 884837
Metadata Summary
Problem Reports
Data Access Policy
Narrative Documents
Project Information
Data Activity or Cruise Information
Fixed Station Information
BODC Quality Flags
SeaDataNet Quality Flags
Metadata Summary
Data Description |
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
Data Identifiers |
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
Time Co-ordinates(UT) |
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
Spatial Co-ordinates | |||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
Parameters |
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Problem Reports
No Problem Report Found in the Database
Data Access Policy
Public domain data
These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.
The recommended acknowledgment is
"This study uses data from the data source/organisation/programme, provided by the British Oceanographic Data Centre and funded by the funding body."
Narrative Documents
Neil Brown MK3 CTD
The Neil Brown MK3 conductivity-temperature-depth (CTD) profiler consists of an integral unit containing pressure, temperature and conductivity sensors with an optional dissolved oxygen sensor in a pressure-hardened casing. The most widely used variant in the 1980s and 1990s was the MK3B. An upgrade to this, the MK3C, was developed to meet the requirements of the WOCE project.
The MK3C includes a low hysteresis, titanium strain gauge pressure transducer. The transducer temperature is measured separately, allowing correction for the effects of temperature on pressure measurements. The MK3C conductivity cell features a free flow, internal field design that eliminates ducted pumping and is not affected by external metallic objects such as guard cages and external sensors.
Additional optional sensors include pH and a pressure-temperature fluorometer. The instrument is no longer in production, but is supported (repair and calibration) by General Oceanics.
Specifications
These specification apply to the MK3C version.
Pressure | Temperature | Conductivity | |
Range | 6500 m 3200 m (optional) | -3 to 32°C | 1 to 6.5 S cm-1 |
Accuracy | 0.0015% FS 0.03% FS < 1 msec | 0.0005°C 0.003°C < 30 msec | 0.0001 S cm-1 0.0003 S cm-1 < 30 msec |
Further details can be found in the specification sheet.
Aquatracka fluorometer
The Chelsea Instruments Aquatracka is a logarithmic response fluorometer. It uses a pulsed (5.5 Hz) xenon light source discharging between 320 and 800 nm through a blue filter with a peak transmission of 420 nm and a bandwidth at half maximum of 100 nm. A red filter with sharp cut off, 10% transmission at 664 nm and 678 nm, is used to pass chlorophyll-a fluorescence to the sample photodiode.
The instrument may be deployed either in a through-flow tank, on a CTD frame or moored with a data logging package.
Further details can be found in the manufacturer's specification sheet.
SeaTech Transmissometer
Introduction
The transmissometer is designed to accurately measure the the amount of light transmitted by a modulated Light Emitting Diode (LED) through a fixed-length in-situ water column to a synchronous detector.
Specifications
- Water path length: 5 cm (for use in turbid waters) to 1 m (for use in clear ocean waters).
- Beam diameter: 15 mm
- Transmitted beam collimation: <3 milliradians
- Receiver acceptance angle (in water): <18 milliradians
- Light source wavelength: usually (but not exclusively) 660 nm (red light)
Notes
The instrument can be interfaced to Aanderaa RCM7 current meters. This is achieved by fitting the transmissometer in a slot cut into a customized RCM4-type vane.
A red LED (660 nm) is used for general applications looking at water column sediment load. However, green or blue LEDs can be fitted for specilised optics applications. The light source used is identified by the BODC parameter code.
Further details can be found in the manufacturer's Manual.
RRS Charles Darwin 84 CTD Data Documentation
Instrumentation
The CTD profiles were taken with an RVS Neil Brown Systems Mk3B CTD incorporating a pressure sensor, conductivity cell, platinum resistance thermometer and a Beckman dissolved oxygen sensor. The CTD unit was mounted vertically in the centre of a protective cage approximately 1.5 m square. Attached to the bars of the frame were a Chelsea Instruments Aquatracka fluorometer, a Chelsea Instruments Aquatracka configured as a nephelometer and a SeaTech red light (661 nm) transmissometer with a 25 cm path length.
A General Oceanics rosette sampler fitted with 12, 10 litre Niskin or GoFlo bottles was mounted above the frame. The bases of the bottles were 0.75 m above the pressure head with their tops 1.55 m above it. One of the bottles was fitted with a holder for up to three digital reversing thermometers mounted 1.38 m above the CTD temperature sensor.
Below the rosette sampler, fitted to the bottom of the cage, was a PML 2-pi PAR (photosynthetically available radiation) sensor pointing downwards to measure upwelling irradiance. A second such sensor was fitted above the rosette pointing upwards to measure downwelling irradiance. Both sensors were pressure hardened to 1000 db. It should be noted that the PAR sensors were vertically separated by approximately 2 m. These instruments were only attached for a small number of casts (CTD1, CTD2, CTD3).
Lowering rates were generally in the range of 0.5-1.0 m/sec but could be up to 1.5 m/sec. Bottle samples and reversing thermometer measurements were acquired on the upcast.
Data Acquisition
CTD data were sampled at a frequency of 32 Hz. Data reduction was done in real time by the RVS Level A microcomputer system producing a 1-second time series. This was logged as digital counts on the Level C workstation via the Level B data buffer.
On-Board Data Processing
RVS software on the Level C (a SUN workstation) was used to convert the raw counts into engineering units (Volts for the PAR sensor, transmissometer and fluorometer, ml/l for oxygen, mmho cm-1 for conductivity and °C for temperature).
Salinity (Practical Salinity Units, as defined by the Practical Salinity Scale (Fofonoff and Millard 1982)) was calculated from the conductivity ratio (conductivity / 42.914) and a time lagged temperature using the function described in UNESCO Report 37 (1981).
Data were written onto Quarter Inch Cartridge tapes in RVS internal format and submitted to BODC for post-cruise processing and data-banking.
Post-Cruise Processing
Reformatting
The data were converted into the BODC internal format to allow the use of in-house software tools, notably the graphics editor. In addition to reformatting, the transfer program applied the following modifications to the data:
Dissolved oxygen was converted from ml/l to µM by multiplying the values by 44.66.
The raw transmissometer voltages were corrected for light source decay using a correction ratio computed from light readings in air taken during the cruise and the manufacturer's figure for the new instrument (4.738V). The correction was applied as follows:
From | To | Air Reading(V) |
---|---|---|
18/01/94 18:13 | 22/01/94 14:00 | 4.683 |
22/01/94 14:01 | 23/01/94 15:00 | 4.670 |
23/01/94 15:01 | 24/01/94 09:00 | 4.673 |
24/01/94 09:01 | 25/01/94 11:00 | 4.705 |
25/01/94 11:01 | 26/01/94 10:30 | 4.700 |
26/01/94 10:31 | 27/01/94 10:00 | 4.761 |
27/01/94 10:01 | 28/01/94 10:00 | 4.763 |
28/01/94 10:01 | 29/01/94 14:00 | 4.739 |
29/01/94 14:01 | 30/01/94 04:30 | 4.683 |
30/01/94 04:31 | 31/01/94 13:00 | 4.763 |
31/01/94 13:01 | 02/02/94 09:00 | 4.775 |
Transmissometer voltages were converted to percentage transmission by multiplying them by 20 and then to attenuance using the algorithm:-
attenuance = *4 * ln (percent transmittance / 100) |
The 2-pi PAR voltages were converted to W/m2 using the equations:
Downwelling: | PAR = exp (-5.060 * V + 6.5746) |
Upwelling: | PAR = exp (-4.978 * V + 6.7770) |
Editing
Using a custom in-house graphics editor, the downcasts and upcasts were differentiated and the limits of the downcasts were marked by flags in the cycle number channel. In addition, spikes on all the downcast channels were manually flagged 'suspect' by modification of the associated quality control flag. In this way none of the original data values were edited or deleted during quality control.
The pressure ranges over which the bottle samples were taken were logged using the editor. Usually, the marked reaction of the oxygen sensor to the bottle firing signal was used to determine this. These pressure ranges were subsequently used, in conjunction with a geometrical correction for the position of the water bottles with respect to the CTD pressure transducer, to determine the pressure range of data to be averaged to obtain values for calibration.
Once screened, the CTD downcasts were loaded into a database under the Oracle relational database management system and later migrated to the National Oceanographic Database. The following manual edits were applied to the data:
A salinity offset of -0.08 PSU (from the depth of 955.4db downwards) was noticed during the screening of cast CTD18. This was corrected in ORACLE by adding 0.08 PSU to all affected salinity values.
The PAR meters were attached to the CTD on only two casts.
Calibration
With the exception of pressure, calibrations were done by comparison of CTD data against measurements made on water bottle samples or from the reversing thermometers mounted on the water bottles in the case of temperature. In general, values were averaged from the CTD downcasts but where inspection on a graphics workstation showed significant hysteresis, values were manually extracted from the CTD upcasts.
All calibrations described here have been applied to the data.
Pressure
The pressure offset was determined by looking at the pressures recorded when the CTD was clearly logging in air (readily apparent from the conductivity channel). A consistent value was observed throughout the cruise thus:
Pcorrected = Pobserved - 0.675 |
Temperature
The CTD temperature readings were in excellent agreement with digital reversing thermometer readings. Hence no temperature calibration was applied.
Salinity
Salinity was calibrated against 49 water bottle samples measured using a Guildline 55358 Autolab salinometer during the cruise. Samples were taken from the bottles fired on 20 casts. Usually 1 sample was taken per cast except for casts CTD7, CTD16 and CTD17 where 12, 11 and 10 water bottle samples were taken respectively.
Samples were collected in glass bottles filled to just below the neck and sealed with plastic stoppers. Batches of samples were left for at least 24 hours to reach thermal equilibrium in the constant temperature laboratory containing the salinometer before analysis.
The correction determined for all casts from this cruise was:
Scorrected = Sobserved + 0.076 |
Oxygen
The dissolved oxygen sensor was calibrated against 83 water bottle samples analysed following the Winkler titration procedures outlined in Carpenter (1965). The samples were taken from 19 casts (except CTD11). Sensor drift during the cruise was apparent. Therefore the calibration was applied in segments thus:
Cast | Slope | Intercept | R2 |
---|---|---|---|
CTD1-CTD4 | 1.20 | -16.3 | 94.9% |
CTD5 | 1.18 | -18.2 | 92.4% |
CTD6, CTD7 | 0.88 | 45.4 | 90.2% |
CTD8 | 0.93 | 34.9 | 88.4% |
CTD9 | 0.99 | 26.5 | 96.8% |
CTD10, CTD11 | 0.90 | 39.7 | 99.1% |
CTD12-CTD15 | 1.01 | 20.5 | 95.9% |
CTD16 | 1.68 | -110.0 | 77.2% |
CTD17-CTD20 | 0.73 | 88.7 | 75.8% |
Oxygen saturations present in the data files were computed using the algorithm presented in Benson and Krause (1984).
Chlorophyll
An attempt was made to calibrate the fluorometer using a regression against extracted chlorophyll. However, due to a large baseline drift of the instrument throughout the cruise it was not possible to obtain a satisfactory calibration. Therefore all fluorometer data were discarded.
Data Reduction
The final data set were produced by binning the calibrated data to 1 (casts shallower than 100 m) or 2 decibars. The binning algorithm excluded any data points flagged suspect and attempted linear interpolation over gaps up to 3 bins wide. If any gaps larger than this were encountered, the data in the gaps were set null.
Data Warnings
All chlorophyll data were discarded as the fluorometer baseline drift significantly exceeded the signal.
References
Benson, B.B. and Krause D. jnr. 1984.The concentration and isotopic fractionation of oxygen dissolved in fresh water and sea water in equilibrium with the atmosphere. Limnol. Oceanogr. 29 pp.620-632.
Carpenter J.H. 1965. The Chesapeake Bay Institute techniques for the Winkler dissolved oxygen method. Limnol.Oceanogr. 10 pp.141-143.
Fofonoff, N.P. and Millard R.C. 1982. Algorithms for computation of fundamental properties of seawater. UNESCO Technical Papers in Marine Science. 44.
Project Information
Ocean Margin EXchange (OMEX) I
Introduction
OMEX was a European multidisciplinary oceanographic research project that studied and quantified the exchange processes of carbon and associated elements between the continental shelf of western Europe and the open Atlantic Ocean. The project ran in two phases known as OMEX I (1993-1996) and OMEX II - II (1997-2000), with a bridging phase OMEX II - I (1996-1997). The project was supported by the European Union under the second and third phases of its MArine Science and Technology Programme (MAST) through contracts MAS2-CT93-0069 and MAS3-CT97-0076. It was led by Professor Roland Wollast from Université Libre de Bruxelles, Belgium and involved more than 100 scientists from 10 European countries.
Scientific Objectives
The aim of the Ocean Margin EXchange (OMEX) project was to gain a better understanding of the physical, chemical and biological processes occurring at the ocean margins in order to quantify fluxes of energy and matter (carbon, nutrients and other trace elements) across this boundary. The research culminated in the development of quantitative budgets for the areas studied using an approach based on both field measurements and modeling.
OMEX I (1993-1996)
The first phase of OMEX was divided into sub-projects by discipline:
- Physics
- Biogeochemical Cycles
- Biological Processes
- Benthic Processes
- Carbon Cycling and Biogases
This emphasises the multidisciplinary nature of the research.
The project fieldwork focussed on the region of the European Margin adjacent to the Goban Spur (off the coast of Brittany) and the shelf break off Tromsø, Norway. However, there was also data collected off the Iberian Margin and to the west of Ireland. In all a total of 57 research cruises (excluding 295 Continuous Plankton Recorder tows) were involved in the collection of OMEX I data.
Data Availability
Field data collected during OMEX I have been published by BODC as a CD-ROM product, entitled:
- OMEX I Project Data Set (two discs)
Further descriptions of this product and order forms may be found on the BODC web site.
The data are also held in BODC's databases and subsets may be obtained by request from BODC.
Data Activity or Cruise Information
Cruise
Cruise Name | CD84 |
Departure Date | 1994-01-18 |
Arrival Date | 1994-02-02 |
Principal Scientist(s) | Peter J Statham (University of Southampton Department of Oceanography) |
Ship | RRS Charles Darwin |
Complete Cruise Metadata Report is available here
Fixed Station Information
No Fixed Station Information held for the Series
BODC Quality Control Flags
The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:
Flag | Description |
---|---|
Blank | Unqualified |
< | Below detection limit |
> | In excess of quoted value |
A | Taxonomic flag for affinis (aff.) |
B | Beginning of CTD Down/Up Cast |
C | Taxonomic flag for confer (cf.) |
D | Thermometric depth |
E | End of CTD Down/Up Cast |
G | Non-taxonomic biological characteristic uncertainty |
H | Extrapolated value |
I | Taxonomic flag for single species (sp.) |
K | Improbable value - unknown quality control source |
L | Improbable value - originator's quality control |
M | Improbable value - BODC quality control |
N | Null value |
O | Improbable value - user quality control |
P | Trace/calm |
Q | Indeterminate |
R | Replacement value |
S | Estimated value |
T | Interpolated value |
U | Uncalibrated |
W | Control value |
X | Excessive difference |
SeaDataNet Quality Control Flags
The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:
Flag | Description |
---|---|
0 | no quality control |
1 | good value |
2 | probably good value |
3 | probably bad value |
4 | bad value |
5 | changed value |
6 | value below detection |
7 | value in excess |
8 | interpolated value |
9 | missing value |
A | value phenomenon uncertain |
B | nominal value |
Q | value below limit of quantification |