Metadata Report for BODC Series Reference Number 1639969

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

SIMORC Total Ichthys CTD Data Quality Report

Narrative

SeaBird SBE19 CTDs were deployed on the Ichthys-Maret Island and Ichthys-Champagny Island pipeline routes, Australia.

Data Quality Information

The following data quality checks were applied

• Density profiles with depth were used as a guide to flagging temperature and salinity, whereby physically infeasible density inversions were used as the trigger for flagging salinity.
• Changes in temperature, salinity, or dissolved oxygen concentration too large to be physically feasible were flagged suspect.
• Beginning and End flags were applied to each profile to mark when the CTD was clearly in the water and the data outside this range should be treated with caution.

The salinity channel was heavily flagged as large spikes were recorded when the CTD was lowered through a thermocline. This data should be used with caution.

Data Access Policy

SIMORC data access conditions

The data collated and held at BODC on behalf of the SIMORC project are restricted. However, the data will be available to download from the Official SIMORC Website, as part of the project protocol. The data set will initially include data from the oil companies TOTAL, Shell and BP.

Narrative Documents

Sea-Bird SBE 19 and SBE 19plus SEACAT Profiler CTDs

The SBE 19 SEACAT Profiler is a self-contained, battery powered, pumped CTD system designed to measure conductivity, temperature, and pressure in marine or fresh water environments to depths of 10,500 meters. It was replaced by the SBE 19plus model in 2001. An updated version of this instrument is the SBE 19plus V2, which incorporates an electronics upgrade and additional features, with six differentially amplified A/D input channels, one RS-232 data input channel, and 64 MB FLASH memory.

The standard CTD unit comes with a plastic housing (rated to 600 m), although this can be replaced by titanium housing for depths up to 7000 m. It is typically used for CTD profiling although a conversion kit is available for mooring deployments. The CTD can also be attached to an SBE 36 CTD Deck Unit and Power/Data Interface Module (PDIM) for real-time operation on single-core armored cable up to 10,000 m.

Specifications

*Measurements outside this range may be at slightly reduced accuracy due to extrapolation errors.

Options and accessories

Additional sensors can be attached to the CTD, including:

• high accuracy Paroscientific Digiquartz pressure sensor (depth range 0 to 20, 60, 130, 200, 270, 680, 1400, 2000, 4200, 7000 or 10500 m; accuracy 0.02% of full scale; resolution 0.0025% of full scale)
• Dissolved Oxygen (SBE 43 DO Sensor)
• pH* (SBE 18 pH Sensor or SBE 27 pH/ORP Sensor)
• fluorescence
• radiance (PAR)
• light transmission
• optical backscatter (turbidity)

The standard SBE 5M pump may be replaced by an SBE 5P (plastic housing) or 5T (titanium housing) pump for use with dissolved oxygen and/or other pumped sensors. Further details can be found in the manufacturer's SBE 19plus V2 instrument specification or theSBE 19 andSBE 19 plus user guides.

BODC Processing

Data were received by BODC in Excel spreadsheets which were unstable. They were stabilised as .txt files and then reformatted to QXF format using BODC transfer function 518. The following table shows how the variables within the files were mapped to the appropriate BODC parameter codes:

Following transfer to QXF, the data were screened using BODC's in-house visualisation software, EDSERPLO.

Project Information

System of Industry Metocean data for the Offshore and Research Communities (SIMORC)

The EU-funded SIMORC project is a collaborative effort between MARIS (Netherlands), BODC (UK), the International Association of Oil and Gas Producers (OGP) and IOC-IODE to provide a harmonised and quality controlled metocean data set from data collected by oil and gas producers, accessible through the SIMORC protocol.

Data Activity or Cruise Information

No Data Activity or Cruise Information held for the Series

Fixed Station Information

Fixed Station Information

TOTAL, Australia Ichthys field to Champagny Island (alternative) pipeline route)

Map of pipeline route

ADCPs, current meters, CTDs, met buoys, directional wave recorders and water level recorders were deployed at this site as part of surveys along a proposed pipeline route. These survey were conducted in 2006-2007, 2008-2010 and in 2011 and formed part of the development of the Ichthys field, situated northwest of Broome on the Kimberley coast of Western Australia.

Related Fixed Station activities are detailed in Appendix 1

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: Ichthys-Champagny pipeline

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.