Metadata Report for BODC Series Reference Number 964419

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."

Narrative Documents

Lockhead Martin T7 XBT probe

The XBT's deployed on this cruise were orignally manufactured by Sippican, which was acquired by Lockhead Martin sometime after this cruise ended.

An XBT probe is an expendable free-fall temperature probe that provides a profile of measured temperature against depth calculated from a fall-rate model. The T-7 XBT Probe can be used within a maximum depth of 760m, may be deployed at a ship speed of up to 15 knots and has a vertical resolution of 65cm.

Further details can be found in the manufacturer's specification sheet.

Processing by BODC of JR97 XBT data

The data were submitted to BODC in Excel format. Data were converted from excel to text format by BODC. The data for each variable in these .txt files were transferred to QXF format using BODC in-house Matlab generated code. Each variable is mapped to a unique parameter code. The mapping can be seen below.

The data were screened using the BODC in-house visualisation software Edserplo. Any suspect data points were flagged with the appropriate data quality control flag.

Processing by Originator of JR97 XBT data

Twenty-three XBT were deployed during the RRS James Clark Ross JR97 cruise (aka JR20050203), one per day while on passage. Data were obtained from nineteen of these casts, as four casts were abandoned. The cruise report (p121) also states that cast 7 was ceased early. In addition, the cable failed near the start of the cruise during cast 3 and had to be replaced.

Sound velocities were derived from temperature and salinity values. An assumed salinity was used for each cast, as shown in the table below. These sound velocities were then used to correct the EM120 multibeam swath bathymetry system.

More information on the XBTs can be found on page 121 of the JR97 cruise report.

Project Information

AutoSub Under Ice (AUI) Programme

AutoSub was an interdisciplinary Natural Environment Research Council (NERC) thematic programme conceived to investigate the marine environment of floating ice shelves with a view to advancing the understanding of their role in the climate system.

The AUI programme had the following aims:

• To attain the programme's scientific objectives through an integrated programme based on interdisciplinary collaborations and an international perspective
• To develop a data management system for the archiving and collation of data collected by the programme, and to facilitate the eventual exploitation of this record by the community
• To provide high-quality training to develop national expertise in the use of autonomous vehicles in the collection of data from remote environments and the integration of such tools in wider programmes of research
• To stimulate and facilitate the parameterising of sub-ice shelf processes in climate models, and to further demonstrate the value of autonomous vehicles as platforms for data collection among the wider oceanographic and polar community

Following the invitation of outline bids and peer review of fully developed proposals, eight research threads were funded as part of AUI:

Physical Oceanography

• ISOTOPE: Ice Shelf Oceanography: Transports, Oxygen-18 and Physical Exchanges.
• Evolution and impact of Circumpolar Deep Water on the Antarctic continental shelf.
• Oceanographic conditions and processes beneath Ronne Ice Shelf (OPRIS).

Glaciology and Sea Ice

• Autosub investigation of ice sheet boundary conditions beneath Pine Island Glacier.
• Observations and modelling of coastal polynya and sea ice processes in the Arctic and Antarctic.
• Sea ice thickness distribution in the Bellingshausen Sea.

Geology and Geophysics

• Marine geological processes and sediments beneath floating ice shelves in Greenland and Antarctica: investigations using the Autosub AUV.

Biology

• Controls on marine benthic biodiversity and standing stock in ice-covered environments.

The National Oceanography Centre Southampton (NOCS) hosted the AUI programme with ten further institutions collaborating in the project. The project ran from April 2000 until the end of March 2005, with some extensions to projects beyond this date because of research cruise delays. The following cruises were the fieldwork component of the AUI project:

Table 1: Details of the RRS James Clark Ross AUI cruises.

All the cruises utilised the AutoSub autonomous, unmanned and untethered underwater vehicle to collect observations beneath sea-ice and floating ice shelves. AutoSub can be fitted with a range of oceanographic sensors such as:

• Conductivity Temperature Depth (CTD) instruments
• Acoustic Doppler Current Profillers (ADCP)
• A water sampler
• Swath bathymetry systems
• Cameras

In addition to use of AutoSub during each cruise measurements were taken from ship. These varied by cruise but included:

• Ship underway measurements and sampling for parameters such as:
  • Salinity
  • Temperature
  • Fluorescence
  • Oxygen 18 isotope enrichment in water
  • Bathymetry using a swath bathymetry system
• Full-depth CTD casts for with observations of samples taken for parameters such as:
  • Salinity
  • Temperature
  • Fluorescence
  • Optical transmissivity
  • Dissolved oxygen
  • Oxygen 18 isotope enrichment in water
  • Water CFC content
• Sea floor photography and video using the WASP system
• Sea floor sampling with trawls/rock dredges
• Sea ice observations (ASPeCt), drifters and sampling

The AutoSub project also included numerical modelling work undertaken at University College London, UK.

The project included several firsts including the first along-track observations beneath an ice shelf using an autonomous underwater vehicle. The AutoSub vehicle was developed and enhanced throughout this programme and has now become part of the NERC equipment pool for general use by the scientific community. Further information for each cruise can be found in the respective cruise reports (links in Table 1).

Data Activity or Cruise Information

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

No Fixed Station Information held for the Series

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle: