Metadata Report for BODC Series Reference Number 436136
No Problem Report Found in the Database
Open Data supplied by Natural Environment Research Council (NERC)
You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."
Aanderaa Recording Current Meter Model 7/8
Manufacturer's specifications: recording unit height 49.5cm (RCM8 52.0cm), diameter 12.8cm, vane size 48.5x50.0cm. Meter is designed for depths down to 2000m (RCM8 6000m). It incorporates a spindle which is shackled to the mooring line. The meter is attached to the spindle through a gimbal mounting which permits a maximum 27° deviation of the spindle from the vertical, the meter still remaining horizontal.
Meter comprises :
Paddle wheel rotor magnetically coupled to an electronic counter
Vane, which aligns instrument with current flow, has a balance weight ensuring static balance and tail fins to ensure dynamic balance in flows up to 250cm/s.
Magnetic compass (needle is clamped to potentiometer ring) - direction recorded with 0.35° resolution, 5° accuracy for speeds 5 to 100cm/s, 7.5° accuracy for remaining speeds within 2.5 to 200cm/s range.
Quartz clock, accuracy better than 2 sec/day within temperature range 0 to 20°C.
Thermistor (temperature sensor), standard range -2.46 to 21.48°C (max on high range 36.04°C), accuracy 0.05°C, resolution 0.1 per cent of range, 63 per cent response time 12sec.
Inductive cell conductivity sensor (optional), range 0 to 70mmho/cm standard resolution 0.1 per cent of range.
Silicon piezoresistive bridge, standard range 0 to 3000 psi (RCM8 to 9000 psi), resolution 0.1% of range.
Self balancing potentiometer which converts the output from each sensor into a 10 bit binary number for storage on magnetic tape.
A built-in clock triggers the instrument at preset intervals and up to six channels are sampled in sequence. Channel 1 is a fixed reference reading for control purposes and data identification. Channels 2, 3 and 4 represent measurement of temperature, conductivity and pressure. Channels 5 and 6 represent the VECTOR AVERAGED current speed and direction since the previous triggering of the instrument. The number of rotor revolutions and the direction is sampled every 12 seconds and broken into North and East components. Successive components are added and recorded as speed and direction. For recording intervals longer than 10 minutes, speed and direction are sampled 1/50th of recording interval.
It has become common practice in some laboratories to deploy these meters as temperature and conductivity loggers without current measuring capabilities.
The following link will provide the manufacturer specifications:Manufacturer specifications
Aanderaa Current Meter Data Processing
Data Originator's Processing
The following procedures are carried out before the data were supplied to BODC.
Data were downloaded from the instrument logger, and factory calibrations were applied to the current speed channel, and the pressure, conductivity and temperature channels when fitted. Where available, laboratory calibrations of the current direction channels were used; factory formulae were used in their absence. Where no form factor was known for the conductivity sensor, a value of 2.8 was used.
Please note (concerns vector averaged current data): The current data are averaged by the logger over the sampling interval, whereas the pressure, temperature and conductivity data are single point measurements taken at the end of the interval. The data originator has moved the time stamps to the mid-point of the vector averaging sampling interval for all channels without interpolation.
BODC Data Processing and Quality Control
Where pressure sensors were fitted: the data record was compared with the pressure computed from the water depth on deployment and rig geometry. The time series was visually screened for evidence of rig movement (e.g. trawling) and excessive leaning (perhaps due to strong currents).
Where temperature sensors were fitted: the data record was compared with calibrated CTD data taken in the vicinity and checked for agreement within a few tenths of a degree Celsius. Obvious spikes were flagged. Periods of excessively noisy data were noted.
Where conductivity sensors were fitted: salinity (PSS-78) was computed from in-situ temperature and conductivity and a nominal pressure computed from the water depth on deployment and rig geometry. Obvious spikes were flagged.
BODC Current Meter Screening
BODC screen both the series header qualifying information and the parameter values in the data cycles themselves.
Header information is inspected for:
- Irregularities such as unfeasible values
- Inconsistencies between related information. For example:
- Depths of meter and sea bed.
- Times for mooring deployment and for start/end of data series.
- Length of record or number of data cycles, the cycle interval, the clock error and the period over which accrued.
- Parameters stated as measured and the parameters actually present in the data cycles.
- Originator's comments on meter/mooring performance and data quality.
Documents are written by BODC highlighting irregularities which cannot be resolved.
Data cycles are inspected using time series plots of all parameters. Currents are additionally inspected using vector scatter plots and time series plots of North and East velocity components. These presentations undergo intrinsic and extrinsic screening to detect infeasible values within the data cycles themselves and inconsistencies as seen when comparing characteristics of adjacent data sets displaced with respect to depth, position or time. Values suspected of being of non- oceanographic origin may be tagged with the BODC flag denoting suspect value.
The following types of irregularity, each relying on visual detection in the time series plot, are amongst those which may be flagged as suspect:
- Spurious data at the start or end of the record.
- Obvious spikes occurring in periods free from meteorological disturbance.
- A sequence of constant values in consecutive data cycles.
If a large percentage of the data is affected by irregularities, deemed abnormal, then instead of flagging the individual suspect values, a caution may be documented. Likewise documents will highlight irregularities seen in the current vector scatter plots such as incongruous centre holes, evidence of mooring 'knock-down', abnormal asymmetry in tidally dominated records or gaps as when a range of speeds or directions go unregistered due to meter malfunction.
The term 'knock-down' refers to the situation when the 'drag' exerted on a mooring at high current speeds may cause instruments to tilt beyond the angle at which they are intended to operate. At this point the efficiency of the current sensors to accurately record the flow is reduced.
Inconsistencies between the characteristics of the data set and those of its neighbours are sought, and where necessary, documented. This covers inconsistencies in the following:
- Maximum and minimum values of parameters (spikes excluded).
- The orientation and symmetry of the current vector scatter plot.
- The direction of rotation of the current vectors.
- The approximate amplitude and periodicity of the tidal currents.
- The occurrence of meteorological events and, finally, for series for which no time check was possible, the phase.
This intrinsic and extrinsic screening of the parameter values seeks to confirm the qualifying information and the source laboratory's comments on the series. In screening and collating information, every care is taken to ensure that errors of BODC making are not introduced.
Data Processing Notes
Instrument recorded pressure appears not to accurately reflect instrument depth. Therefore salinity has been computed using a nominal pressure derived from the rig configuration and water depth on deployment.
This instrument was recovered adrift after the mooring had been damaged by trawling.
Land Ocean Interaction Study (LOIS)
The Land Ocean Interaction Study (LOIS) was a Community Research Project of the Natural Environment Research Council (NERC). The broad aim of LOIS was to gain an understanding of, and an ability to predict, the nature of environmental change in the coastal zone around the UK through an integrated study from the river catchments through to the shelf break.
LOIS was a collaborative, multidisciplinary study undertaken by scientists from NERC research laboratories and Higher Education institutions. The LOIS project was managed from NERC's Plymouth Marine Laboratory.
The project ran for six years from April 1992 until April 1998 with a further modelling and synthesis phase beginning in April 1998 and ending in April 2000.
LOIS consisted of the following components:
- River-Atmosphere-Coast Study (RACS)
- RACS(A) - Atmospheric sub-component
- RACS(C) - Coasts sub-component
- RACS(R) - Rivers sub-component
- BIOTA - Terrestrial salt marsh study
- Land Ocean Evolution Perspective Study (LOEPS)
- Shelf-Edge Study (SES)
- North Sea Modelling Study (NORMS)
- Data Management (DATA)
Marine field data were collected between September 1993 and September 1997 as part of RACS(C) and SES. The RACS data were collected throughout this period from the estuaries and coastal waters of the UK North Sea coast from Great Yarmouth to the Tweed. The SES data were collected between March 1995 and September 1996 from the Hebridean slope. Both the RACS and SES data sets incorporate a broad spectrum of measurements collected using moored instruments and research vessel surveys.
LOIS Shelf Edge Study (LOIS - SES)
SES was a component of the NERC Land Ocean Interaction Study (LOIS) Community Research Programme that made intensive measurements from the shelf break in the region known as the Hebridean Slope from March 1995 to September 1996.
SES was devoted to the study of interactions between the shelf seas and the open ocean. The specific objectives of the project were:
To identify the time and space scales of ocean-shelf momentum transmission and to quantify the contributions to ocean-shelf water exchange by physical processes.
To estimate fluxes of water, heat and certain dissolved and suspended constituents across a section of the shelf edge with special emphasis on net carbon export from, and nutrient import to, the shelf.
To incorporate process understanding into models and test these models by comparison with observations and provide a basis for estimation of fluxes integrated over time and the length of the shelf.
The SES fieldwork was focussed on a box enclosing two sections across the shelf break at 56.4-56.5 °N and 56.6-56.7 °N. Moored instrument arrays were maintained throughout the experiment at stations with water depths ranging from 140 m to 1500 m, although there were heavy losses due to the intensive fishing activity in the area. The moorings included meteorological buoys, current meters, transmissometers, fluorometers, nutrient analysers (but these never returned any usable data), thermistor chains, colour sensors and sediment traps.
The moorings were serviced by research cruises at approximately three-monthly intervals. In addition to the mooring work this cruises undertook intensive CTD, water bottle and benthic surveys with cruise durations of up to 6 weeks (3 legs of approximately 2 weeks each).
Moored instrument activities associated with SES comprised current measurements in the North Channel in 1993 and the Tiree Passage from 1995-1996. These provided boundary conditions for SES modelling activities.
Additional data were provided through cruises undertaken by the Defence Evaluation and Research Agency (DERA) in a co-operative programme known as SESAME.
|Start Date (yyyy-mm-dd)||1995-03-28|
|End Date (yyyy-mm-dd)||1995-04-10|
|Organization Undertaking Activity||Proudman Oceanographic Laboratory (now National Oceanography Centre, Liverpool)|
|Country of Organization||United Kingdom|
|Originator's Data Activity Identifier||POLRIG#679|
|Platform Category||subsurface mooring|
Proudman Oceanographic Laboratory Moored Instrument Rig #679
This rig was deployed as part of the LOIS Shelf-Edge Study at site S300.
|Rig position:||56° 28.45'N 09° 03.71'W|
|Deployed:||28 Mar 1995 15:30 |
from RRS Charles Darwin (cruise CD91B)
The instruments were anchored by 1000kg of chain and kept erect by a 40" diameter buoy attached 45m below the sea surface.
Instruments deployed on the rig
|Height above |
|249m||Aanderaa current meter (#6275) +|
|159m||Aanderaa current meter (#8247) *|
|7m||Aanderaa current meter (#11048) * |
fitted with SeaTech transmissometer (#558)
Instruments marked "*" were lost probably due to trawling.
Instruments marked "+" were found adrift of the rig position.
|Principal Scientist(s)||John Huthnance (Proudman Oceanographic Laboratory)|
|Ship||RRS Charles Darwin|
Complete Cruise Metadata Report is available here
Fixed Station Information
|Station Name||LOIS(SES) S300|
|Latitude||56° 27.14' N|
|Longitude||9° 4.00' W|
|Water depth below MSL||300.0 m|
LOIS (SES) Mooring and CTD Site S300
Site S300 was a fixed station where moorings were deployed during the Land-Ocean Interaction Study (LOIS) Shelf Edge Study (SES). It was also one of fourteen CTD sites on repeat section S, across the Hebridean Slope, occupied by cruises between March 1995 and September 1996.
Instrument Deployment History
The following tables summarise the instruments deployed at this site for which data may be available.
Each different letter in the tables above corresponds to an individual instrument record.
- CM = Current meter (Aanderaa or S4)
- TChn = Thermistor chain
- Tr = Transmissometer
- NA = Nutrient analyser
- Transmissometers may have been fitted to some of the current meters.
- Other instruments (colour sensors) may have been deployed.
- Only periods for which useful data were returned are shown.
Related Fixed Station activities are detailed in Appendix 1
The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:
|<||Below detection limit|
|>||In excess of quoted value|
|A||Taxonomic flag for affinis (aff.)|
|B||Beginning of CTD Down/Up Cast|
|C||Taxonomic flag for confer (cf.)|
|E||End of CTD Down/Up Cast|
|G||Non-taxonomic biological characteristic uncertainty|
|I||Taxonomic flag for single species (sp.)|
|K||Improbable value - unknown quality control source|
|L||Improbable value - originator's quality control|
|M||Improbable value - BODC quality control|
|O||Improbable value - user quality control|
The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:
|0||no quality control|
|2||probably good value|
|3||probably bad value|
|6||value below detection|
|7||value in excess|
|A||value phenomenon uncertain|
|Q||value below limit of quantification|
Appendix 1: LOIS(SES) S300
Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.
If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.
|Series Identifier||Data Category||Start date/time||Start position||Cruise|
|506074||PAR radiance and irradiance||1995-05-08 12:11:00||56.4547 N, 9.0652 W||RRS Charles Darwin CD93A|
|439656||Hydrography time series at depth||1995-05-08 12:30:00||56.4547 N, 9.0652 W||RRS Charles Darwin CD93A|
|439804||Hydrography time series at depth||1995-05-09 16:15:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|439700||Hydrography time series at depth||1995-05-09 16:30:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|439724||Hydrography time series at depth||1995-05-09 16:30:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|426074||Currents -subsurface Eulerian||1995-05-09 16:32:30||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|431316||Currents -subsurface Eulerian||1995-05-09 16:45:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|431341||Currents -subsurface Eulerian||1995-05-09 16:45:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|431408||Currents -subsurface Eulerian||1995-05-09 16:45:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|439306||Currents -subsurface Eulerian||1995-05-09 16:45:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|439331||Currents -subsurface Eulerian||1995-05-09 16:45:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|439761||Hydrography time series at depth||1995-05-09 17:00:00||56.4587 N, 9.0627 W||RRS Charles Darwin CD93A|
|390260||CTD or STD cast||1995-07-27 22:28:00||56.4582 N, 9.0683 W||RRS Challenger CH120|
|439712||Hydrography time series at depth||1995-08-14 14:05:00||56.458 N, 9.0632 W||RRS Challenger CH121A|
|431353||Currents -subsurface Eulerian||1995-08-14 14:07:30||56.458 N, 9.0632 W||RRS Challenger CH121A|
|439318||Currents -subsurface Eulerian||1995-08-14 14:07:30||56.458 N, 9.0632 W||RRS Challenger CH121A|
|439343||Currents -subsurface Eulerian||1995-08-14 14:07:30||56.458 N, 9.0632 W||RRS Challenger CH121A|
|431328||Currents -subsurface Eulerian||1995-08-14 14:10:30||56.458 N, 9.0632 W||RRS Challenger CH121A|
|431421||Currents -subsurface Eulerian||1995-08-14 14:10:30||56.458 N, 9.0632 W||RRS Challenger CH121A|
|426086||Currents -subsurface Eulerian||1995-08-14 14:12:30||56.458 N, 9.0632 W||RRS Challenger CH121A|
|439736||Hydrography time series at depth||1995-08-14 14:25:00||56.458 N, 9.0632 W||RRS Challenger CH121A|
|439773||Hydrography time series at depth||1995-08-14 14:25:00||56.458 N, 9.0632 W||RRS Challenger CH121A|
|439816||Hydrography time series at depth||1995-08-14 14:59:30||56.458 N, 9.0632 W||RRS Challenger CH121A|
|431365||Currents -subsurface Eulerian||1995-09-03 11:15:00||56.4588 N, 9.0622 W||RRS Challenger CH121C|
|431433||Currents -subsurface Eulerian||1995-09-03 11:15:00||56.4588 N, 9.0622 W||RRS Challenger CH121C|
|439540||Hydrography time series at depth||1995-09-03 11:30:00||56.4587 N, 9.0622 W||RRS Challenger CH121C|
|439748||Hydrography time series at depth||1995-09-03 11:30:00||56.4587 N, 9.0622 W||RRS Challenger CH121C|
|438905||Currents -subsurface Eulerian||1995-11-27 07:45:00||56.4622 N, 9.0612 W||RRS Challenger CH123A|
|442467||Hydrography time series at depth||1996-04-19 12:30:00||56.455 N, 9.0643 W||RRS Challenger CH126A|
|436241||Currents -subsurface Eulerian||1996-04-19 12:45:00||56.455 N, 9.0643 W||RRS Challenger CH126A|
|436289||Currents -subsurface Eulerian||1996-04-19 12:45:00||56.455 N, 9.0643 W||RRS Challenger CH126A|
|439005||Currents -subsurface Eulerian||1996-04-19 12:45:00||56.455 N, 9.0643 W||RRS Challenger CH126A|
|442418||Hydrography time series at depth||1996-04-19 13:00:00||56.455 N, 9.0643 W||RRS Challenger CH126A|
|442455||Hydrography time series at depth||1996-04-19 13:00:00||56.455 N, 9.0643 W||RRS Challenger CH126A|
|439423||Currents -subsurface Eulerian||1996-04-19 13:30:00||56.455 N, 9.0643 W||RRS Challenger CH126A|
|436216||Currents -subsurface Eulerian||1996-04-19 14:15:00||56.455 N, 9.0643 W||RRS Challenger CH126A|
|496188||Transmittance/attenuance, turbidity, or SPM conc.||1996-04-19 14:42:00||56.4615 N, 9.0602 W||RRS Challenger CH126A|
|442572||Hydrography time series at depth||1996-04-19 15:00:00||56.4615 N, 9.0602 W||RRS Challenger CH126A|
|439030||Currents -subsurface Eulerian||1996-07-11 20:37:30||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|439460||Currents -subsurface Eulerian||1996-07-11 20:37:30||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477295||Hydrography time series at depth||1996-07-11 20:40:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477258||Hydrography time series at depth||1996-07-11 20:42:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477314||Hydrography time series at depth||1996-07-11 20:42:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477363||Hydrography time series at depth||1996-07-11 20:42:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477271||Hydrography time series at depth||1996-07-11 20:44:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477326||Hydrography time series at depth||1996-07-11 20:44:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477338||Hydrography time series at depth||1996-07-11 20:44:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477351||Hydrography time series at depth||1996-07-11 20:44:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477302||Hydrography time series at depth||1996-07-11 20:46:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|477283||Hydrography time series at depth||1996-07-11 20:50:00||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|442615||Hydrography time series at depth||1996-07-11 20:50:03||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|442627||Hydrography time series at depth||1996-07-11 20:50:03||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|438886||Currents -subsurface Eulerian||1996-07-11 21:02:30||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|442603||Hydrography time series at depth||1996-07-11 21:10:03||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|438898||Currents -subsurface Eulerian||1996-07-11 21:32:30||56.4553 N, 9.0648 W||RRS Challenger CH128A|
|438954||Currents -subsurface Eulerian||1996-07-11 21:32:30||56.4553 N, 9.0648 W||RRS Challenger CH128A|