Metadata Report for BODC Series Reference Number 529233


Metadata Summary

Data Description

Data Category Hydrography time series at depth
Instrument Type
NameCategories
Aanderaa thermistor chain  water temperature sensor; thermistor chains
Instrument Mounting subsurface mooring
Originating Country United Kingdom
Originator -
Originating Organization Proudman Oceanographic Laboratory (now National Oceanography Centre, Liverpool)
Processing Status banked
Project(s) Provess
 

Data Identifiers

Originator's Identifier AT2334.802
BODC Series Reference 529233
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 1998-09-10 12:25
End Time (yyyy-mm-dd hh:mm) 1998-11-01 09:00
Nominal Cycle Interval 300.0 seconds
 

Spatial Co-ordinates

Latitude 59.33330 N ( 59° 20.0' N )
Longitude 1.08330 E ( 1° 5.0' E )
Positional Uncertainty 0.1 to 0.5 n.miles
Minimum Sensor Depth 37.32 m
Maximum Sensor Depth 87.32 m
Minimum Sensor Height 25.68 m
Maximum Sensor Height 75.68 m
Sea Floor Depth 113.0 m
Sensor Distribution Scattered at fixed depths - The sensors are scattered with respect to depth but each remains effectively at the same depth for the duration of the series
Sensor Depth Datum Sea floor reference - Depth measured as a height above sea floor but converted into a depth relative to the sea surface according to the same datum as used for sea floor depth (applicable to instrument depths not bathymetric depths)
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODE Rank Units Short Title Title
DEPHTC01 0 Metres ThermChainSensDepth Depth below surface of the water body by physical measurement and conversion from height above seabed using bathymetric depth
AADYAA01 1 Days Date(Loch_Day) Date (time from 00:00 01/01/1760 to 00:00 UT on day)
AAFDZZ01 1 Days Time(Day_Fract) Time (time between 00:00 UT and timestamp)
TEMPTC01 2 Degrees Celsius WaterTemp_TC Temperature of the water body by in-situ thermistor
 

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."


Narrative Documents

Aanderaa Thermistor Chain

Instrumentation

The thermistor string comprises 11 sensors electrically connected to a logger. The sensors are equally spaced along the string; string lengths range from 10m to 400m. Sensors used are Fenwal 2K iso-curve thermistors (type GB32JM19) with time constant of approximately 3.5min for 63pcent of step change. The thermistors have identical calibration curves to within ±0.1 °C.

Standard temperature ranges are: low range (-2.46 to 21.48 °C), high range (10.08 to 36.00 °C), wide range (-0.34 to 32.17 °C). A resistor, accurate to ±0.025deg C, within the logger is used to select the range.

Calibrations

The calibration formula, corresponding to the temperature range chosen, converts the logger reading N to degrees C with an accuracy of ±0.05deg C, The worst accumulated error (taking into account the accuracy of the formula, the thermistor and the resistor) is ±0.175 °C. These errors can be reduced by carrying out temperature calibrations at 0 °C. This can give an accuracy of ±0.05 °C. The theoretical limit of accuracy is ±0.0125 °C, approx. To approach this accuracy better interpolation formulae and frequent calibrations are required.

The data are logged either by Aanderaa TR loggers or by SeaData loggers (which incorporate a temperature sensor and hence record 12 channels).

General Data Screening carried out by BODC

BODC screen both the series header qualifying information and the parameter values in the data cycles themselves.

Header information is inspected for:

Documents are written by BODC highlighting irregularities which cannot be resolved.

Data cycles are inspected using time or depth series plots of all parameters. Currents are additionally inspected using vector scatter plots and time series plots of North and East velocity components. These presentations undergo intrinsic and extrinsic screening to detect infeasible values within the data cycles themselves and inconsistencies as seen when comparing characteristics of adjacent data sets displaced with respect to depth, position or time. Values suspected of being of non-oceanographic origin may be tagged with the BODC flag denoting suspect value; the data values will not be altered.

The following types of irregularity, each relying on visual detection in the plot, are amongst those which may be flagged as suspect:

If a large percentage of the data is affected by irregularities then a Problem Report will be written rather than flagging the individual suspect values. Problem Reports are also used to highlight irregularities seen in the graphical data presentations.

Inconsistencies between the characteristics of the data set and those of its neighbours are sought and, where necessary, documented. This covers inconsistencies such as the following:

This intrinsic and extrinsic screening of the parameter values seeks to confirm the qualifying information and the source laboratory's comments on the series. In screening and collating information, every care is taken to ensure that errors of BODC making are not introduced.


Project Information

PROcesses of Vertical Exchange in Shelf Seas (PROVESS)

Introduction

PROVESS was an interdisciplinary study of the vertical fluxes of properties through the water column and the surface and bottom boundary layers. The project was funded by the European Community MAST-III programme (MAS3-CT97- 0159) and ran from March 1998 to May 2001.

Scientific Rationale

PROVESS was based on the integration of experimental, theoretical and modelling studies with the aim of improving understanding and quantification of vertical exchange processes in the water column, in particular in the surface and benthic boundary layers and across the> pycnocline. PROVESS also explored mechanisms of physical-biological coupling in which vertical exchanges and turbulence significantly affect the environmental conditions experienced by the biota with particular reference to aggregation, flocculation, sedimentation and trophic interactions.

Fieldwork

The experimental phase of the project was carried out at two contrasting sites in the North Sea: the northern North Sea site (NNS) and the southern North Sea site (SNS).

The two sites had the following characteristics:

SNS NNS
Position 52° 15.0' N, 4° 17.0' E 59° 20.0' E, 1° 00.0' E
Time of year April-May September-November
Water depth (m) 16 100
M2 max amplitude (m s-1) 0.75 0.15
Max current (m s-1) 1.0 0.6
Delta T (deg C) mixed 7-1
Thermocline depth (m) mixed 35-100
Delta S 1 small
Halocline depth (m) 5-10 cf. thermocline depth
Max wind speed (m s-1) 20 25
Max wave height (m) 5 10
Max wave period (s) 8 10
Internal motion No Yes
Sediment muddy-sand muddy-sand
Biology eutrophic oligotrophic

At both locations measurements were concentrated at a central position with additional measurements being made to estimate horizontal gradients. Moored instruments (including current meters, temperature and pressure sensors, fluorometers, transmissometers, nutrient analysers and meteorological sensors) were deployed between 7 September and 5 November 1998 at the NNS and between 29 March and 25 May 1999 at the SNS. Each experiment was supported by intensive measurement series made from oceanographic ships and involving turbulence dissipation profiler CTD, particle size profilers, optical profilers, benthic sampling and water bottle sampling.

Details of the cruises were as follows:

Site Ship
(nationality)
Cruise
Mnemonic
Date
NNS Valdivia (GER) VA174 5 - 17 Sep 1998
  Dana (DK) D1198 14 - 26 Oct 1998
  Pelagia (NL) PE125 19 - 30 Oct 1998
  Challenger (UK) CH140 22 Oct - 9 Nov 1998
SNS Pelagia (NL) PE135 29 Mar - 9 Apr 1999
  Mitra (NL) MT0499 19 - 30 Apr 1999
  Belgica (BE) BG9912 17 - 21 May 1999

Data Activity or Cruise Information

Data Activity

Start Date (yyyy-mm-dd) 1998-09-10
End Date (yyyy-mm-dd) 1998-11-01
Organization Undertaking ActivityProudman Oceanographic Laboratory (now National Oceanography Centre, Liverpool)
Country of OrganizationUnited Kingdom
Originator's Data Activity IdentifierPOLRIG#802
Platform Categorysubsurface mooring

PROVESS Project POLRIG#802

This mooring was also known within PROVESS as 'Rig R'. It was deployed on the eastern branch of the Northern North Sea Site in the autumn of 1998. The rig was deployed by FS Valdivia (cruise #174) in September 1998 and recovered by RRS Challenger (cruise #140) in October/November 1998.

Mooring type 50 m thermistor chain mooring with sub-surface buoyancy
Instruments 50 m thermistor chain below logger at 75 m
Temperature probe Minilog at 25, 20, 15 and 5 m above seabed

Other Series linked to this Data Activity - 517625 517613 517637 517649

Cruise

Cruise Name VLD174 (PROVESS N-1)
Departure Date 1998-09-05
Arrival Date 1998-09-17
Principal Scientist(s)Gunther Krause (Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research)
Ship FS Valdivia

Complete Cruise Metadata Report is available here


Fixed Station Information

Fixed Station Information

Station NamePROVESS Northern North Sea Site
CategoryOffshore area
Latitude59° 18.00' N
Longitude1° 0.00' E
Water depth below MSL110.0 m

PROVESS Northern North Sea Site

Nineteen mooring packages were deployed at PROVESS Northern North Sea site during the cruise Valdivia VA174 in September 1998. The layout of the mooring assemblage was L-shaped. It consisted of an heavily-instrumented site centred close to 59° 20' N, 1° 00'E (Site A with rigs A, B, Ca/b, D, E, Fa/b, G, H, I, J1, J2 and L) and secondary single-rig sites extending up to 40 km north (V and Y) and east (U and X). An addition mooring package, NIOZ or Rig M, was also deployed at Site A during the RV Pelagia PE125 cruise in October 1998.

Rigs Ca/b and Fa/b were two short-term rigs which were recovered at the end of the cruise VA174 and redeployed during the cruise Challenger CH140 in October. All the other rigs were recovered during the cruise CH140 in October-November 1998 apart from rigs H and L which could not be found and rig Cb which was trawled and recovered from Peterhead (Scotland).

The layout of the mooring array was:

BODC image

Mooring data

The data returned from each rig were as follows:

Rig identifier Data
A POLRIG#790 ADCP currents
Water level
Near-bed temperature
B POLRIG#791 ADCP currents
Near-bed temperature
Ca POLRIG#792 Near-bed temperature
Cb POLRIG#808 Rig trawled, no data returned
D POLRIG#793 Currents
Temperature, salinity and attenuance
E POLRIG#794 Currents
Fa POLRIG#795 Currents
Fb POLRIG#809
NIOZ Unknown Thermistor chain
G POLRIG#796 Meteorology
H POLRIG#797 Mooring lost, no data returned
I POLRIG#798 Surface attenuance, nutrients and chlorophyll
J1 POLRIG#799 Mid-water attenuance, nutrients and chlorophyll
J2 POLRIG#800 Near-bed attenuance, nutrients and chlorophyll
L POLRIG#801 Mooring lost, no data returned
R POLRIG#802 Water column temperature
S POLRIG#803 Water column temperature
U POLRIG#804 ADCP currents
Water level
Near-bed temperature
V POLRIG#805 ADCP currents
Near-bed temperature
X POLRIG#806 Water level
Y POLRIG#807

CTD data

A total of 352 CTD casts were also collected during the four cruises surveying this area. These include:

Cruise identifier Cruise dates No. of CTD casts
FS Valdivia (#174) 05 September - 17 September 1998 168
Dana (#1198) 14 October - 26 October 1998 51
RV Pelagia (#125) 19 October - 30 October 1998 73
RRS Challenger (#140) 21 October - 11 November 1998 60

Additonal data

Complementary meteorological and sea state data for PROVESS Northern North Sea Experiment were obtained from Marine Weather Stations located on Beryl and Frigg oil platforms in the Northern North Sea.

Other Series linked to this Fixed Station for this cruise - 517613 517625 517637 517649 517650 517662 517674 517686 517698 517705 517717 517729 517730 517742 517754 517766 518087 518099 518106 518118 524173 524185 524197 524204 524751 524763 524775 524799 524923 524935 524947 524959 529208 529221 541883 541914 541951 541963 541975 541987 553128

Other Cruises linked to this Fixed Station (with the number of series) - CH140 (PROVESS N-4) (2) PE125 (1)


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain