Metadata Report for BODC Series Reference Number 609988

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."

Narrative Documents

SeaTech Transmissometer

Introduction

The transmissometer is designed to accurately measure the the amount of light transmitted by a modulated Light Emitting Diode (LED) through a fixed-length in-situ water column to a synchronous detector.

Specifications

• Water path length: 5 cm (for use in turbid waters) to 1 m (for use in clear ocean waters).
• Beam diameter: 15 mm
• Transmitted beam collimation: <3 milliradians
• Receiver acceptance angle (in water): <18 milliradians
• Light source wavelength: usually (but not exclusively) 660 nm (red light)

Notes

The instrument can be interfaced to Aanderaa RCM7 current meters. This is achieved by fitting the transmissometer in a slot cut into a customized RCM4-type vane.

A red LED (660 nm) is used for general applications looking at water column sediment load. However, green or blue LEDs can be fitted for specilised optics applications. The light source used is identified by the BODC parameter code.

Further details can be found in the manufacturer's Manual.

Project Information

North Sea Project

The North Sea Project (NSP) was the first Marine Sciences Community Research project of the Natural Environment Research Council (NERC). It evolved from a NERC review of shelf sea research, which identified the need for a concerted multidisciplinary study of circulation, transport and production.

The ultimate aim of the NERC North Sea Project was the development of a suite of prognostic water quality models to aid management of the North Sea. To progress towards water quality models, three intermediate objectives were pursued in parallel:

• Production of a 3-D transport model for any conservative passive constituent, incorporating improved representations of the necessary physics - hydrodynamics and dispersion;
• Identifying and quantifying non-conservative processes - sources and sinks determining the cycling and fate of individual constituents;
• Defining a complete seasonal cycle as a database for all the observational studies needed to formulate, drive and test models.

Proudman Oceanographic Laboratory hosted the project, which involved over 200 scientists and support staff from NERC and other Government funded laboratories, as well as seven universities and polytechnics.

The project ran from 1987 to 1992, with marine field data collection between April 1988 and October 1989. One shakedown (CH28) and fifteen survey cruises (Table 1), each lasting 12 days and following the same track, were repeated monthly. The track selected covered the summer-stratified waters of the north and the homogeneous waters in the Southern Bight in about equal lengths together with their separating frontal band from Flamborough head to Dogger Bank, the Friesian Islands and the German Bight. Mooring stations were maintained at six sites for the duration of the project.

Alternating with the survey cruises were process study cruises (Table 2), which investigated some particular aspect of the science of the North Sea. These included fronts (nearshore, circulation and mixing), sandwaves and sandbanks, plumes (Humber, Wash, Thames and Rhine), resuspension, air-sea exchange, primary productivity and blooms/chemistry.

In addition to the main data collection period, a series of cruises took place between October 1989 and October 1990 that followed up work done on previous cruises (Table 3). Process studies relating to blooms, plumes (Humber, Wash and Rhine), sandwaves and the flux of contaminants through the Dover Strait were carried out as well as two `survey' cruises.

The data collected during the observational phase of the North Sea Project comprised one of the most detailed sets of observations ever undertaken in any shallow shelf sea at that time.

North Sea Project Resuspension Process Study

The ratio of particulate to dissolved material which is so important to water quality is affected by resuspension which, in turn, depends on the character of the sea bed, biological influences, tidal currents, wind, wave and seasonal stratification. The objectives of the three resuspension cruises were to make time series observations of physical, sedimentological and biological properties of the sediment, suspended particle material and water at two sites in the North Sea, using a variety of moored instruments, CTD/water bottle casts, pumped sampling and sediment grabs and box cores.

The two sites were:

1. • Northern Site
   • 54° 35'N, 004° 50'E
   • 45m depth
   • muddy sand
   • seasonally stratified water column
2. • Southern Site
   • 52° 40'N, 003° 40'E
   • 27m depth
   • sand
   • permanently well-mixed water column

Data Activity or Cruise Information

Data Activity

North Sea Project POLRIG#60410

Deployment

This rig was deployed as part of the Resuspension experiments at the Northern Site.

Rig description

The U-shaped mooring consisted of three Aanderaa current meters (RCM7) and three SeaTech transmissometers (TR). A marker buoy was attached to the anchor, the anchor was attached by a ground line to a further anchor, which was attached to a sub-surface buoy (0.8 m diameter steel sphere). The three current meters and transmissometers were attached to this line.

Related Data Activity activities are detailed in Appendix 1

Fixed Station Information

Fixed Station Information

Fixed Station: North Sea Project Resuspension Experiment Northern Site

This site was one of two contrasting North Sea sites occupied during the North Sea Project Resuspension Experiment.

The Northern site was located in 45m of water and was characterised by a muddy sand bed and a seasonally stratified water column.

The rigs deployed here lie within a box bounded by co-ordinates 54.576N 4.801E at the southwest corner and 54.600N 4.865E at the northeast corner. Magnetic variation at this site was 2.9° west.

Northern site deployment history is summarised below:

ADCP = Acoustic Doppler Current Profiler
TR = Transmissometer
CM = Current Meter
MET = Met. Buoy
WV = Wave Rider
TG = Tide Gauge

Related Fixed Station activities are detailed in Appendix 2

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: RIG#60410

Related series for this Data Activity are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.

Appendix 2: NSP Resusp. N

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.