Metadata Report for BODC Series Reference Number 248590

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Quality Report

A visual inspection between these data, data recorded by other instruments on the same mooring and data recorded during previous/subsequent deployments show good agreement.

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."

Narrative Documents

InterOcean Spherical Solid State Sensor Current Meter S4 series

The S4 family are self-contained current measuring sensors enclosing all necessary solid state electronics for acquiring, processing and outputting data. Data retrieval is accomplished through a serial port without opening the instrument.

The spherical shape of the S4 is a contributing factor in the rejection of the vertical components of water movement and there are no protruding parts or sensor support structures to interfere with the water flow.

The S4 measures the magnitude and direction of the horizontal current motion of the water. Water flows through the electromagnetic field created by the instrument, thereby producing a voltage which is proportional to the magnitude of the water velocity past the sensor. This voltage is then sensed by two pairs of titanium electrodes located symmetrically on the equator of the spherical housing which forms the sensor.

Manufacturer's specifications: Meter (sphere, diameter 25cm) is designed for depths down to 1000m (S4 standard: glass-filled cycloaliphalic epoxy construction with grooved surface for hydrodynamic stability) or down to 6000m (S4D, deep: annealed borosilicate glass version with smooth surface). The meter is shackled directly into the mooring cable by means of an axial titanium load bearing shaft.

Meter comprises:-

1. Electromagnetic, 2 axis current speed sensor, range 0 to 350cm/s (standard) 0 to 50 and 0 to 100cm/s (optional), resolution 0.2cm/s (standard) 0.03cm/s (0 to 50 range) 0.06cm/s (0 to 100 range), accuracy 2 per cent reading +/- 1cm/s. The sensor responds to the component of flow normal to its vertical axis.

2. Flux-gate magnetometer compass for heading information used to reference the current direction to magnetic north, compass range 360°, resolution 0.5°, accuracy 2°, tilt +/- 25° for specified accuracy.

3. Temperature stable quartz oscillator clock, accuracy 12 minutes/year.

4. Optional automatic tilt compensation i.e. the allowable tilt of the meter from the vertical at which the vertical cosine response is fully corrected, angle range +/- 45°, resolution 0.6°, accuracy (speed correction) 1 per cent (angle output) 0.25°.

5. Optional semiconductor (thermistor or platinum) temperature sensor, range -5 to +45 °C, resolution 0.05 °C, accuracy 0.2 °C, response time at 63 per cent 1 min (1.5 sec thermistor or 60msec platinum).

6. Optional conductive conductivity sensor, range 5 to 70mS/cm, resolution 0.1mS/cm, accuracy 0.2mS/cm (optional inductive sensor, range 1 to 70mS/cm).

7. Optional semiconductor strain gauge pressure sensor, range 0 to 1000dBar (70M option), resolution 1dBar (4mm with 70M option), accuracy 0.25 per cent fs.

8. Recorder, CMOS static RAM microprocessor, 64KByte (128K or 256KByte optional) performs vector averaging, burst sampling and adaptive sampling.

Available versions of the S4 are listed in the table below:

Further details are available from the manufacturer's specification sheet.

BODC Current Meter Screening

BODC screen both the series header qualifying information and the parameter values in the data cycles themselves.

Header information is inspected for:

• Irregularities such as unfeasible values
• Inconsistencies between related information. For example:
  • Depths of meter and sea bed.
  • Times for mooring deployment and for start/end of data series.
  • Length of record or number of data cycles, the cycle interval, the clock error and the period over which accrued.
  • Parameters stated as measured and the parameters actually present in the data cycles.
• Originator's comments on meter/mooring performance and data quality.

Documents are written by BODC highlighting irregularities which cannot be resolved.

Data cycles are inspected using time series plots of all parameters. Currents are additionally inspected using vector scatter plots and time series plots of North and East velocity components. These presentations undergo intrinsic and extrinsic screening to detect infeasible values within the data cycles themselves and inconsistencies as seen when comparing characteristics of adjacent data sets displaced with respect to depth, position or time. Values suspected of being of non- oceanographic origin may be tagged with the BODC flag denoting suspect value.

The following types of irregularity, each relying on visual detection in the time series plot, are amongst those which may be flagged as suspect:

• Spurious data at the start or end of the record.
• Obvious spikes occurring in periods free from meteorological disturbance.
• A sequence of constant values in consecutive data cycles.

If a large percentage of the data is affected by irregularities, deemed abnormal, then instead of flagging the individual suspect values, a caution may be documented. Likewise documents will highlight irregularities seen in the current vector scatter plots such as incongruous centre holes, evidence of mooring 'knock-down', abnormal asymmetry in tidally dominated records or gaps as when a range of speeds or directions go unregistered due to meter malfunction.

The term 'knock-down' refers to the situation when the 'drag' exerted on a mooring at high current speeds may cause instruments to tilt beyond the angle at which they are intended to operate. At this point the efficiency of the current sensors to accurately record the flow is reduced.

Inconsistencies between the characteristics of the data set and those of its neighbours are sought, and where necessary, documented. This covers inconsistencies in the following:

• Maximum and minimum values of parameters (spikes excluded).
• The orientation and symmetry of the current vector scatter plot.
• The direction of rotation of the current vectors.
• The approximate amplitude and periodicity of the tidal currents.
• The occurrence of meteorological events and, finally, for series for which no time check was possible, the phase.

This intrinsic and extrinsic screening of the parameter values seeks to confirm the qualifying information and the source laboratory's comments on the series. In screening and collating information, every care is taken to ensure that errors of BODC making are not introduced.

Project Information

North Sea Project

The North Sea Project (NSP) was the first Marine Sciences Community Research project of the Natural Environment Research Council (NERC). It evolved from a NERC review of shelf sea research, which identified the need for a concerted multidisciplinary study of circulation, transport and production.

The ultimate aim of the NERC North Sea Project was the development of a suite of prognostic water quality models to aid management of the North Sea. To progress towards water quality models, three intermediate objectives were pursued in parallel:

• Production of a 3-D transport model for any conservative passive constituent, incorporating improved representations of the necessary physics - hydrodynamics and dispersion;
• Identifying and quantifying non-conservative processes - sources and sinks determining the cycling and fate of individual constituents;
• Defining a complete seasonal cycle as a database for all the observational studies needed to formulate, drive and test models.

Proudman Oceanographic Laboratory hosted the project, which involved over 200 scientists and support staff from NERC and other Government funded laboratories, as well as seven universities and polytechnics.

The project ran from 1987 to 1992, with marine field data collection between April 1988 and October 1989. One shakedown (CH28) and fifteen survey cruises (Table 1), each lasting 12 days and following the same track, were repeated monthly. The track selected covered the summer-stratified waters of the north and the homogeneous waters in the Southern Bight in about equal lengths together with their separating frontal band from Flamborough head to Dogger Bank, the Friesian Islands and the German Bight. Mooring stations were maintained at six sites for the duration of the project.

Alternating with the survey cruises were process study cruises (Table 2), which investigated some particular aspect of the science of the North Sea. These included fronts (nearshore, circulation and mixing), sandwaves and sandbanks, plumes (Humber, Wash, Thames and Rhine), resuspension, air-sea exchange, primary productivity and blooms/chemistry.

In addition to the main data collection period, a series of cruises took place between October 1989 and October 1990 that followed up work done on previous cruises (Table 3). Process studies relating to blooms, plumes (Humber, Wash and Rhine), sandwaves and the flux of contaminants through the Dover Strait were carried out as well as two `survey' cruises.

The data collected during the observational phase of the North Sea Project comprised one of the most detailed sets of observations ever undertaken in any shallow shelf sea at that time.

Data Activity or Cruise Information

Data Activity

North Sea Project POLRIG#C33FC

Deployment

This rig was deployed as part of the North Sea Project Survey at Site F.

Rig Description

The U-shaped mooring consisted of one InterOcean System Model S4 current meter and one Aanderaa RCM7 current meter. A spar marker buoy was attached to the anchor, a ground line attached the anchor to a further anchor and this was attached to a sub-surface (0.8m diameter steel sphere) buoy. The two current meters were attached to this line.

The Aanderaa pressure sensor was not of tide gauge quality, it was used to give an indication of mooring stability.

Related Data Activity activities are detailed in Appendix 1

Fixed Station Information

Fixed Station Information

North Sea Project Survey Mooring Site F and CTD Site AE

Site F was one of six fixed stations where moorings were deployed during the North Sea Project survey. This location is also one of 123 North Sea Project CTD Sites.

The site was situated in a region of strong tidal currents, up to a maximum of 1.0 m/s and in relatively shallow (30 m) water. These factors produced well mixed conditions through the water column, throughout the year.

The rigs deployed here line within a box bounded by co-ordinates 52° 36.50'N, 003° 45.20'E at the southwest corner and 52° 37.10'N, 003° 46.14'E at the northeast corner. The magnetic variation at this site was 3.1°W.

The deployment history is summarised below:

Related Fixed Station activities are detailed in Appendix 2

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: RIG#C33FC

Related series for this Data Activity are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.

Appendix 2: NSP Survey F and CTD Site AE

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.