Search the data

Metadata Report for BODC Series Reference Number 796002


Metadata Summary

Data Description

Data Category CTD or STD cast
Instrument Type
NameCategories
Neil Brown MK3 CTD  CTD; water temperature sensor; salinity sensor; dissolved gas sensors
SeaTech transmissometer  transmissometers
Chelsea Technologies Group Aquatracka fluorometer  fluorometers
Chelsea Technologies Group 2-pi PAR irradiance sensor  radiometers
Instrument Mounting lowered unmanned submersible
Originating Country United Kingdom
Originator Mr John Howarth
Originating Organization Proudman Oceanographic Laboratory (now National Oceanography Centre, Liverpool)
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) North Sea Project 1987-1992
 

Data Identifiers

Originator's Identifier 2021
BODC Series Reference 796002
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 1989-05-27 04:50
End Time (yyyy-mm-dd hh:mm) -
Nominal Cycle Interval 1.0 decibars
 

Spatial Co-ordinates

Latitude 52.61317 N ( 52° 36.8' N )
Longitude 3.76517 E ( 3° 45.9' E )
Positional Uncertainty 0.05 to 0.1 n.miles
Minimum Sensor or Sampling Depth 1.49 m
Maximum Sensor or Sampling Depth 22.3 m
Minimum Sensor or Sampling Height 6.4 m
Maximum Sensor or Sampling Height 27.21 m
Sea Floor Depth 28.7 m
Sea Floor Depth Source PEVENT
Sensor or Sampling Distribution Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODERankUnitsTitle
ATTNZR011per metreAttenuation (red light wavelength) per unit length of the water body by transmissometer
CPHLPR011Milligrams per cubic metreConcentration of chlorophyll-a {chl-a CAS 479-61-8} per unit volume of the water body [particulate >unknown phase] by in-situ chlorophyll fluorometer
DOXYPR011Micromoles per litreConcentration of oxygen {O2 CAS 7782-44-7} per unit volume of the water body [dissolved plus reactive particulate phase] by in-situ Beckmann probe
IRRDPP011MicroEinsteins per square metre per secondDownwelling 2-pi scalar irradiance as photons of electromagnetic radiation (PAR wavelengths) in the water body by 2-pi scalar radiometer
IRRUPP011MicroEinsteins per square metre per secondUpwelling 2-pi scalar irradiance as photons of electromagnetic radiation (PAR wavelengths) in the water body by 2-pi scalar radiometer
OSEDTR011Milligrams per litreConcentration of suspended particulate material (organic) {SPM} per unit volume of the water body [particulate >unknown phase] by in-situ optical attenuance measurement and calibration against sample data
OXYSBB011PercentSaturation of oxygen {O2 CAS 7782-44-7} in the water body [dissolved plus reactive particulate phase] by in-situ Beckmann probe and computation from concentration using Benson and Krause algorithm
POTMCV011Degrees CelsiusPotential temperature of the water body by computation using UNESCO 1983 algorithm
PRESPR011DecibarsPressure (spatial coordinate) exerted by the water body by profiling pressure sensor and correction to read zero at sea level
PSALST011DimensionlessPractical salinity of the water body by CTD and computation using UNESCO 1983 algorithm
SIGTPR011Kilograms per cubic metreSigma-theta of the water body by CTD and computation from salinity and potential temperature using UNESCO algorithm
TEMPST011Degrees CelsiusTemperature of the water body by CTD or STD
TSEDTR011Milligrams per litreConcentration of suspended particulate material {SPM} per unit volume of the water body [particulate >unknown phase] by in-situ optical attenuance measurement and calibration against sample data

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."


Narrative Documents

Neil Brown MK3 CTD

The Neil Brown MK3 conductivity-temperature-depth (CTD) profiler consists of an integral unit containing pressure, temperature and conductivity sensors with an optional dissolved oxygen sensor in a pressure-hardened casing. The most widely used variant in the 1980s and 1990s was the MK3B. An upgrade to this, the MK3C, was developed to meet the requirements of the WOCE project.

The MK3C includes a low hysteresis, titanium strain gauge pressure transducer. The transducer temperature is measured separately, allowing correction for the effects of temperature on pressure measurements. The MK3C conductivity cell features a free flow, internal field design that eliminates ducted pumping and is not affected by external metallic objects such as guard cages and external sensors.

Additional optional sensors include pH and a pressure-temperature fluorometer. The instrument is no longer in production, but is supported (repair and calibration) by General Oceanics.

Specifications

These specification apply to the MK3C version.

Pressure Temperature Conductivity
Range

6500 m

3200 m (optional)

-3 to 32°C 1 to 6.5 S cm-1
Accuracy

0.0015% FS

0.03% FS < 1 msec

0.0005°C

0.003°C < 30 msec

0.0001 S cm-1

0.0003 S cm-1 < 30 msec

Further details can be found in the specification sheet.

Aquatracka fluorometer

The Chelsea Instruments Aquatracka is a logarithmic response fluorometer. It uses a pulsed (5.5 Hz) xenon light source discharging between 320 and 800 nm through a blue filter with a peak transmission of 420 nm and a bandwidth at half maximum of 100 nm. A red filter with sharp cut off, 10% transmission at 664 nm and 678 nm, is used to pass chlorophyll-a fluorescence to the sample photodiode.

The instrument may be deployed either in a through-flow tank, on a CTD frame or moored with a data logging package.

Further details can be found in the manufacturer's specification sheet.

Chelsea Technologies Photosynthetically Active Radiation (PAR) Irradiance Sensor

This sensor was originally designed to assist the study of marine photosynthesis. With the use of logarithmic amplication, the sensor covers a range of 6 orders of magnitude, which avoids setting up the sensor range for the expected signal level for different ambient conditions.

The sensor consists of a hollow PTFE 2-pi collector supported by a clear acetal dome diverting light to a filter and photodiode from which a cosine response is obtained. The sensor can be used in moorings, profiling or deployed in towed vehicles and can measure both upwelling and downwelling light.

Specifications

Operation depth 1000 m
Range 2000 to 0.002 µE m-2 s-1
Angular Detection Range ± 130° from normal incidence
Relative Spectral Sensitivity

flat to ± 3% from 450 to 700 nm

down 8% of 400 nm and 36% at 350 nm

Further details can be found in the manufacturer's specification sheet.

SeaTech Transmissometer

Introduction

The transmissometer is designed to accurately measure the the amount of light transmitted by a modulated Light Emitting Diode (LED) through a fixed-length in-situ water column to a synchronous detector.

Specifications

  • Water path length: 5 cm (for use in turbid waters) to 1 m (for use in clear ocean waters).
  • Beam diameter: 15 mm
  • Transmitted beam collimation: <3 milliradians
  • Receiver acceptance angle (in water): <18 milliradians
  • Light source wavelength: usually (but not exclusively) 660 nm (red light)

Notes

The instrument can be interfaced to Aanderaa RCM7 current meters. This is achieved by fitting the transmissometer in a slot cut into a customized RCM4-type vane.

A red LED (660 nm) is used for general applications looking at water column sediment load. However, green or blue LEDs can be fitted for specilised optics applications. The light source used is identified by the BODC parameter code.

Further details can be found in the manufacturer's Manual.

RRS Challenger 53 CTD Data Documentation

Instrumentation

The CTD unit was a Neil Brown Mk. 3 incorporating a pressure sensor, conductivity cell, platinum resistance thermometer and a Beckmann dissolved oxygen sensor. This was mounted vertically in the centre of a protective cage approximately 1.5m square.

Attached to bars of the frame were an Aquatracka logarithmic response fluorometer and a Seatech red light (661 nm) transmissometer with a 25 cm path length.

Above the frame was a General Oceanics rosette sampler fitted with 12, 10 litre water bottles. These comprised a mixture of Niskin, general purpose Go-Flo and ultra-clean teflon lined Go-Flo bottles as dictated by sampling requirements. The base of the bottles were 0.75m above and the tops 1.55m above the pressure head. One bottle was fitted with a holder for twin reversing thermometers mounted 1.38m above the CTD temperature sensor.

Above the rosette was a PML 2-pi PAR (photosynthetically active radiation) sensor pointing upwards to measure downwelling irradiance. A second 2-pi PAR sensor, pointing downwards, was fitted to the bottom of the cage to measure upwelling irradiance. It should be noted that these sensors were vertically separated by 2m with the upwelling sensor 0.2m below the pressure head and the downwelling sensor 1.75m above it.

No account has been taken of rig geometry in the compilation of the CTD data set. However, all water bottle sampling depths have been corrected for rig geometry and represent the true position of the midpoint of the water bottle in the water column.

Operational procedure and data logging

On each cast the CTD was lowered to a depth of approximately 5 metres and held until the oxygen reading stabilised. It was then raised to the surface and lowered continuously at 0.5 to 1 m/s to as close as possible to the sea floor. The upcast was done in stages between the bottle firing depths.

Data were logged by the Research Vessel Services ABC data logging system. The deck unit outputs were sampled at 32 Hz by a microprocessor interface (the Level A) which passed time stamped averaged cycles at 1 Hz to a Sun workstation (the Level C) via a buffering system (the Level B).

Data processing

The raw data comprised ADC counts. These were converted into engineering units (Volts for PAR meters, fluorometer and transmissometer: ml/l for oxygen: mmho/cm for conductivity: °C for temperature) by the application of laboratory determined calibrations and salinity was computed using the algorithm in Fofonoff and Millard (1983). The data were submitted to BODC in this form.

Within BODC the data were reformatted on an IBM main-frame. At this stage transmissometer air readings recorded during the cruise were used to correct the transmissometer voltage to the manufacturer's specified voltage by ratio. The voltages were then converted to percentage transmittance (multiplied by 20.0) and dissolved oxygen converted to µM (multiplied by 44.66).

Next the data were loaded onto a Silicon Graphics workstation. A sophisticated interactive screening program was used to delimit the downcast, mark the depth range of water bottle firings and flag any spikes on all of the data channels.

The data were returned to the IBM and the downcasts loaded into a database under the Oracle relational database management system. At this stage percentage transmittance was converted to attenuance to eliminate the influence of instrument path length using the equation:

Attenuance = -4.0 * loge (% trans/100)

Calibration sample data were merged into the database and files of sample value against CTD reading at the bottle depth were prepared for the Principal Investigators to determine the calibrations. Due allowance was made for rig geometry. Note that CTD downcast values were generally used although the bottles were fired on the upcast. The validity of an assumed static water column for the duration of the cast was checked on the graphics workstation and upcast values substituted if necessary.

Sigma-T values were calculated using the algorithm presented in Fofonoff and Millard (1983). Oxygen saturations were computed using the equation of Weiss (1970).

Calibrations

For each cast the mean pressure reading logged whilst the instrument was in air was determined. The average of these, determined as -1.7 db, was added to each pressure value.

Two digital reversing thermometers were fired at the bottom of each cast. The mean difference, determined for all casts on the cruise, between the averaged calibrated readings and the CTD temperature, 0.005 °C, was added to the CTD temperatures.

A sample was taken from the bottom bottle of each cast and salinity was determined using a Guildline Autosal. The mean difference, determined for all casts on the cruise, between the bottle values and the CTD salinity, 0.067 PSU, was added to the CTD salinities.

Extracted chlorophyll values were log transformed and regressed against fluorometer voltage to give the calibration equation:

Chlorophyll (mg/m3) = exp (1.400*V - 2.703) (n=284; r2=58.52)

Dissolved oxygen was calibrated against Winkler titration data for water bottle samples as a primary standard and calibrated data from the underway Endeco system as a secondary standard.

The resulting calibration equation was:

Calibrated oxygen (µM) = Raw oxygen*0.72 + 120.70

Attenuance was regressed against total, organic and inorganic suspended matter determinations to derive the equations below to allow attenuance to be expressed in terms of suspended matter.

Total suspended matter (mg/l) = (Attenuance-0.561)/0.344 (n=184; r2=76.6%)
Inorganic suspended matter (mg/l) = (Attenuance-0.804)/0.356 (n=157; r2=63.9%)
Organic suspended matter (mg/l) = (Attenuance-0.537)/0.828 (n=158; r2=35.0%)

The PAR meters were calibrated using the following laboratory determined calibrations:

Upwelling: PAR (µE/m2/s) = exp (-5.151*V + 6.6035) * 0.0375
Downwelling: PAR (µE/m2/s) = exp (-5.122*V + 6.5739) * 0.0375

Warnings

The statistics for the chlorophyll calibration are mediocre.

The statistics for the organic suspended matter calibration are poor.

References

Fofonoff, N.P and Millard, R.C. Jr. (1983). Algorithms for the computation of fundamental properties of sea water.

Weiss, R.F. (1970). The solubility of nitrogen, oxygen and argon in water and sea water. Deep Sea Res. 17, 721-735.


Project Information

North Sea Project

The North Sea Project (NSP) was the first Marine Sciences Community Research project of the Natural Environment Research Council (NERC). It evolved from a NERC review of shelf sea research, which identified the need for a concerted multidisciplinary study of circulation, transport and production.

The ultimate aim of the NERC North Sea Project was the development of a suite of prognostic water quality models to aid management of the North Sea. To progress towards water quality models, three intermediate objectives were pursued in parallel:

  • Production of a 3-D transport model for any conservative passive constituent, incorporating improved representations of the necessary physics - hydrodynamics and dispersion;
  • Identifying and quantifying non-conservative processes - sources and sinks determining the cycling and fate of individual constituents;
  • Defining a complete seasonal cycle as a database for all the observational studies needed to formulate, drive and test models.

Proudman Oceanographic Laboratory hosted the project, which involved over 200 scientists and support staff from NERC and other Government funded laboratories, as well as seven universities and polytechnics.

The project ran from 1987 to 1992, with marine field data collection between April 1988 and October 1989. One shakedown (CH28) and fifteen survey cruises (Table 1), each lasting 12 days and following the same track, were repeated monthly. The track selected covered the summer-stratified waters of the north and the homogeneous waters in the Southern Bight in about equal lengths together with their separating frontal band from Flamborough head to Dogger Bank, the Friesian Islands and the German Bight. Mooring stations were maintained at six sites for the duration of the project.

Table 1: Details of NSP Survey Cruises on RRS Challenger
Cruise No. Date
CH28 29/04/88 - 15/05/88
CH33 04/08/88 - 16/08/88
CH35 03/09/88 - 15/09/88
CH37 02/10/88 - 14/10/88
CH39 01/11/88 - 13/11/88
CH41 01/12/88 - 13/12/88
CH43 30/12/88 - 12/01/89
CH45 28/01/89 - 10/02/89
CH47 27/02/89 - 12/03/89
CH49 29/03/89 - 10/04/89
CH51 27/04/89 - 09/05/89
CH53 26/05/89 - 07/06/89
CH55 24/06/89 - 07/07/89
CH57 24/07/89 - 06/08/89
CH59 23/08/89 - 04/09/89
CH61 21/09/89 - 03/10/89

Alternating with the survey cruises were process study cruises (Table 2), which investigated some particular aspect of the science of the North Sea. These included fronts (nearshore, circulation and mixing), sandwaves and sandbanks, plumes (Humber, Wash, Thames and Rhine), resuspension, air-sea exchange, primary productivity and blooms/chemistry.

Table 2: Details of NSP Process cruises on RRS Challenger
Cruise No. Date Process
CH34 18/08/88 - 01/09/88 Fronts - nearshore
CH36 16/09/88 - 30/09/88 Fronts - mixing
CH56 08/07/89 - 22/07/89 Fronts - circulation
CH58 07/08/89 - 21/08/89 Fronts - mixing
CH38 24/10/88 - 31/10/88 Sandwaves
CH40 15/11/88 - 29/11/88 Sandbanks
CH42 15/12/88 - 29/12/88 Plumes/Sandbanks
CH46 12/02/89 - 26/02/89 Plumes/Sandwaves
CH44 13/01/89 - 27/01/89 Resuspension
CH52 11/05/89 - 24/05/89 Resuspension
CH60 06/09/89 - 19/09/89 Resuspension
CH48 13/03/89 - 27/03/89 Air/sea exchanges
CH62 05/10/89 - 19/10/89 Air/sea exchanges
CH50 12/04/89 - 25/04/89 Blooms/chemistry
CH54 09/06/89 - 22/06/89 Production

In addition to the main data collection period, a series of cruises took place between October 1989 and October 1990 that followed up work done on previous cruises (Table 3). Process studies relating to blooms, plumes (Humber, Wash and Rhine), sandwaves and the flux of contaminants through the Dover Strait were carried out as well as two `survey' cruises.

Table 3: Details of NSP `Follow up' cruises on RRS Challenger
Cruise No. Date Process
CH62A 23/10/89 - 03/11/89 Blooms
CH64 03/04/90 - 03/05/90 Blooms
CH65 06/05/90 - 17/05/90 Humber plume
CH66A 20/05/90 - 31/05/90 Survey
CH66B 03/06/90 - 18/06/90 Contaminants through Dover Strait
CH69 26/07/90 - 07/08/90 Resuspension/Plumes
CH72A 20/09/90 - 02/10/90 Survey
CH72B 04/10/90 - 06/10/90 Sandwaves/STABLE
CH72C 06/10/90 - 19/10/90 Rhine plume

The data collected during the observational phase of the North Sea Project comprised one of the most detailed sets of observations ever undertaken in any shallow shelf sea at that time.


Data Activity or Cruise Information

Cruise

Cruise Name CH53
Departure Date 1989-05-26
Arrival Date 1989-06-07
Principal Scientist(s)James Watson (Dunstaffnage Marine Laboratory)
Ship RRS Challenger

Complete Cruise Metadata Report is available here


Fixed Station Information

Fixed Station Information

Station NameNSP Survey F and CTD Site AE
CategoryOffshore area
Latitude52° 37.00' N
Longitude3° 46.00' E
Water depth below MSL30.0 m

North Sea Project Survey Mooring Site F and CTD Site AE

Site F was one of six fixed stations where moorings were deployed during the North Sea Project survey. This location is also one of 123 North Sea Project CTD Sites.

The site was situated in a region of strong tidal currents, up to a maximum of 1.0 m/s and in relatively shallow (30 m) water. These factors produced well mixed conditions through the water column, throughout the year.

The rigs deployed here line within a box bounded by co-ordinates 52° 36.50'N, 003° 45.20'E at the southwest corner and 52° 37.10'N, 003° 46.14'E at the northeast corner. The magnetic variation at this site was 3.1°W.

The deployment history is summarised below:

Rig ID Meter
Type
Meter
Height
(m)
Start
Date
Data
Return
(Days)
Comments
C33FC CM (S4) 12.0 05/08/88 30.6 Good data
CM
(Aanderaa)
7.0
C35FC CM (S4) 12.7 06/09/88 26.4 Good data
CM
(Aanderaa)
7.0
C37FC CM (S4) 12.0 04/10/88 28.6 Good data
CM
(Aanderaa)
7.0
C39FC CM (S4) 12.0 20/11/88 29.8 Good data
CM
(Aanderaa)
7.0
C43FC CM (S4) 12.0 07/01/89 22.0 Good data
CM
(Aanderaa)
7.0 9.6 Short record
C51FC CM (S4) 12.0 28/04/89 0.0 No data recorded
CM
(Aanderaa)
7.0 0.7 Velocity record short, rotor fouled by fishing line
29.6 Good data for Temperature, Conductivity and Pressure
C53FC CM (S4) 12.0 29/05/89 27.1 Good data
CM
(Aanderaa)
7.0
C55FC CM (S4) 12.0 25/06/89 0.0 Data corrupt
CM
(Aanderaa)
7.0 30.1 Good data
C57FC CM (S4) 12.0 27/07/89 28.2 Good data
CM
(Aanderaa)
7.0
C59FC CM (S4) 12.0 25/08/89 27.3 Good data
CM
(Aanderaa)
7.0

Related Fixed Station activities are detailed in Appendix 1


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
B nominal value
Q value below limit of quantification

Appendix 1: NSP Survey F and CTD Site AE

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.

Series IdentifierData CategoryStart date/timeStart positionCruise
782725CTD or STD cast1988-05-09 00:21:0053.51767 N, 0.68333 ERRS Challenger CH28
768977CTD or STD cast1988-08-05 06:33:0052.6215 N, 3.76883 ERRS Challenger CH33
248590Currents -subsurface Eulerian1988-08-05 14:10:0052.6117 N, 3.7533 ENot applicable
591959Currents -subsurface Eulerian1988-08-05 14:11:0052.6117 N, 3.7533 ENot applicable
769169CTD or STD cast1988-08-07 08:30:0052.622 N, 3.77583 ERRS Challenger CH33
783010CTD or STD cast1988-09-04 02:17:0052.61267 N, 3.7635 ERRS Challenger CH35
783243CTD or STD cast1988-09-06 01:01:0052.62033 N, 3.76667 ERRS Challenger CH35
592047Currents -subsurface Eulerian1988-09-06 06:27:0052.6083 N, 3.7533 ENot applicable
248750Currents -subsurface Eulerian1988-09-06 06:30:0052.6083 N, 3.7533 ENot applicable
784246CTD or STD cast1988-10-02 17:55:0052.62133 N, 3.76167 ERRS Challenger CH37
784467CTD or STD cast1988-10-04 20:20:0052.6175 N, 3.76617 ERRS Challenger CH37
248762Currents -subsurface Eulerian1988-10-04 21:00:0052.6155 N, 3.7687 ENot applicable
592035Currents -subsurface Eulerian1988-10-04 21:00:0052.6155 N, 3.7687 ENot applicable
821271CTD or STD cast1988-11-02 03:35:0052.615 N, 3.759 ERRS Challenger CH39
248608Currents -subsurface Eulerian1988-11-02 12:40:0052.617 N, 3.7657 ENot applicable
592023Currents -subsurface Eulerian1988-11-02 12:40:0052.617 N, 3.7657 ENot applicable
821480CTD or STD cast1988-11-04 02:58:0052.60867 N, 3.7605 ERRS Challenger CH39
785680CTD or STD cast1988-12-02 08:39:0052.6195 N, 3.76783 ERRS Challenger CH41
785145CTD or STD cast1988-12-04 08:56:0052.6155 N, 3.7705 ERRS Challenger CH41
786357CTD or STD cast1989-01-04 21:01:0052.6145 N, 3.76783 ERRS Challenger CH43
786554CTD or STD cast1989-01-07 08:30:0052.61533 N, 3.7625 ERRS Challenger CH43
248621Currents -subsurface Eulerian1989-01-07 09:15:0052.6183 N, 3.7583 ENot applicable
591972Currents -subsurface Eulerian1989-01-07 09:15:0052.6183 N, 3.7583 ENot applicable
791034CTD or STD cast1989-01-29 05:21:0052.6165 N, 3.76833 ERRS Challenger CH45
1859395Water sample data1989-01-29 05:26:0052.61658 N, 3.76834 ERRS Challenger CH45
791046CTD or STD cast1989-01-29 05:44:0052.61933 N, 3.775 ERRS Challenger CH45
1859402Water sample data1989-01-29 05:46:0052.61925 N, 3.775 ERRS Challenger CH45
791255CTD or STD cast1989-01-31 09:29:0052.61533 N, 3.76417 ERRS Challenger CH45
1859611Water sample data1989-01-31 09:32:0052.61537 N, 3.76422 ERRS Challenger CH45
792246CTD or STD cast1989-02-28 01:52:0052.613 N, 3.765 ERRS Challenger CH47
792479CTD or STD cast1989-03-02 03:33:0052.61517 N, 3.75883 ERRS Challenger CH47
1857339Water sample data1989-03-02 03:36:0052.61519 N, 3.7589 ERRS Challenger CH47
793772CTD or STD cast1989-03-30 03:52:0052.61333 N, 3.7665 ERRS Challenger CH49
1858459Water sample data1989-03-30 03:57:0052.61336 N, 3.7665 ERRS Challenger CH49
793993CTD or STD cast1989-04-01 04:44:0052.614 N, 3.76267 ERRS Challenger CH49
1858668Water sample data1989-04-01 04:48:0052.61395 N, 3.76264 ERRS Challenger CH49
794714CTD or STD cast1989-04-28 09:49:0052.61967 N, 3.77083 ERRS Challenger CH51
2081887Water sample data1989-04-28 09:56:2252.61971 N, 3.77075 ERRS Challenger CH51
2083022Water sample data1989-04-28 09:56:2252.61971 N, 3.77075 ERRS Challenger CH51
2096014Water sample data1989-04-28 09:56:2252.61971 N, 3.77075 ERRS Challenger CH51
2096665Water sample data1989-04-28 09:56:2252.61971 N, 3.77075 ERRS Challenger CH51
592011Currents -subsurface Eulerian1989-04-28 10:50:0052.617 N, 3.7665 ENot applicable
794935CTD or STD cast1989-04-30 09:16:0052.62567 N, 3.77067 ERRS Challenger CH51
1860789Water sample data1989-04-30 09:22:0052.62575 N, 3.77065 ERRS Challenger CH51
2082080Water sample data1989-04-30 09:22:0852.62575 N, 3.77065 ERRS Challenger CH51
2083231Water sample data1989-04-30 09:22:0852.62575 N, 3.77065 ERRS Challenger CH51
2096155Water sample data1989-04-30 09:22:0852.62575 N, 3.77065 ERRS Challenger CH51
2096849Water sample data1989-04-30 09:22:0852.62575 N, 3.77065 ERRS Challenger CH51
1863032Water sample data1989-05-27 04:53:0052.61322 N, 3.76522 ERRS Challenger CH53
796014CTD or STD cast1989-05-27 05:45:0052.61933 N, 3.77433 ERRS Challenger CH53
1863044Water sample data1989-05-27 05:48:0052.61935 N, 3.77433 ERRS Challenger CH53
796247CTD or STD cast1989-05-29 04:03:0052.61717 N, 3.7645 ERRS Challenger CH53
1863277Water sample data1989-05-29 04:08:0052.61719 N, 3.76454 ERRS Challenger CH53
248737Currents -subsurface Eulerian1989-05-29 05:10:0052.6157 N, 3.769 ENot applicable
591996Currents -subsurface Eulerian1989-05-29 05:10:0052.6157 N, 3.769 ENot applicable
797343CTD or STD cast1989-06-25 01:30:0052.61217 N, 3.77383 ERRS Challenger CH55
1656310Water sample data1989-06-25 01:33:0052.61211 N, 3.77385 ERRS Challenger CH55
1865548Water sample data1989-06-25 01:33:0052.61211 N, 3.77385 ERRS Challenger CH55
797380CTD or STD cast1989-06-25 08:30:0052.6155 N, 3.76967 ERRS Challenger CH55
1656358Water sample data1989-06-25 08:35:0052.61548 N, 3.76965 ERRS Challenger CH55
1865597Water sample data1989-06-25 08:35:0052.61548 N, 3.76965 ERRS Challenger CH55
591984Currents -subsurface Eulerian1989-06-25 09:10:0052.6147 N, 3.7658 ENot applicable
797552CTD or STD cast1989-06-26 23:38:0052.61733 N, 3.76333 ERRS Challenger CH55
1656543Water sample data1989-06-26 23:42:0052.61734 N, 3.7634 ERRS Challenger CH55
1865770Water sample data1989-06-26 23:42:0052.61734 N, 3.7634 ERRS Challenger CH55
798703CTD or STD cast1989-07-25 03:45:0052.61683 N, 3.76783 ERRS Challenger CH57
1245577Water sample data1989-07-25 03:47:0052.61676 N, 3.76788 ERRS Challenger CH57
1709035Water sample data1989-07-25 03:47:0052.61676 N, 3.76788 ERRS Challenger CH57
1864361Water sample data1989-07-25 03:47:0052.61676 N, 3.76788 ERRS Challenger CH57
248798Currents -subsurface Eulerian1989-07-27 05:10:0052.6167 N, 3.7658 ENot applicable
591960Currents -subsurface Eulerian1989-07-27 05:10:0052.6167 N, 3.7658 ENot applicable
798912CTD or STD cast1989-07-27 05:24:0052.61717 N, 3.77583 ERRS Challenger CH57
1245774Water sample data1989-07-27 05:26:0052.6171 N, 3.77581 ERRS Challenger CH57
1709232Water sample data1989-07-27 05:26:0052.6171 N, 3.77581 ERRS Challenger CH57
1864570Water sample data1989-07-27 05:26:0052.6171 N, 3.77581 ERRS Challenger CH57
801245CTD or STD cast1989-08-24 02:44:0052.6155 N, 3.75367 ERRS Challenger CH59
1855935Water sample data1989-08-24 02:48:0052.61552 N, 3.75363 ERRS Challenger CH59
801282CTD or STD cast1989-08-24 08:42:0052.61667 N, 3.78933 ERRS Challenger CH59
1855972Water sample data1989-08-24 08:44:0052.61665 N, 3.7894 ERRS Challenger CH59
801429CTD or STD cast1989-08-25 23:20:0052.618 N, 3.7665 ERRS Challenger CH59
1856127Water sample data1989-08-25 23:23:0052.61803 N, 3.7665 ERRS Challenger CH59
248805Currents -subsurface Eulerian1989-08-25 23:45:0052.6147 N, 3.7682 ENot applicable
592059Currents -subsurface Eulerian1989-08-25 23:45:0052.6147 N, 3.7682 ENot applicable
799927CTD or STD cast1989-09-22 08:19:0052.62 N, 3.76617 ERRS Challenger CH61
2087207Water sample data1989-09-22 08:23:3952.62001 N, 3.76616 ERRS Challenger CH61
1854692Water sample data1989-09-22 08:24:0052.62001 N, 3.76616 ERRS Challenger CH61
800101CTD or STD cast1989-09-23 21:23:0052.61817 N, 3.76933 ERRS Challenger CH61
1854864Water sample data1989-09-23 21:27:0052.61823 N, 3.76935 ERRS Challenger CH61
802562CTD or STD cast1990-05-21 11:50:0052.619 N, 3.76633 ERRS Challenger CH66A
802710CTD or STD cast1990-05-23 14:47:0052.61917 N, 3.77133 ERRS Challenger CH66A
827881CTD or STD cast1990-06-16 07:35:0052.63783 N, 3.77633 ERRS Challenger CH66B
804476CTD or STD cast1990-09-22 06:16:0052.61767 N, 3.77133 ERRS Challenger CH72A
804741CTD or STD cast1990-09-25 18:29:0052.62517 N, 3.76583 ERRS Challenger CH72A
829549CTD or STD cast1990-10-14 16:27:0052.6185 N, 3.76233 ERRS Challenger CH72C