Metadata Report for BODC Series Reference Number 462966

Metadata Summary
Problem Reports
Data Access Policy
Narrative Documents
Project Information
Data Activity or Cruise Information
Fixed Station Information
BODC Quality Flags
SeaDataNet Quality Flags

Metadata Summary

Data Description

Data Category

CTD or STD cast

Instrument Type

Name	Categories
Sea-Bird SBE 25 Sealogger CTD	CTD; water temperature sensor; salinity sensor

Instrument Mounting

research vessel

Originating Country

United Kingdom

Originator

Dr Bill Turrell

Originating Organization

Scottish Office Agriculture Environment and Fisheries Department Aberdeen Marine Laboratory (now Marine Scotland Aberdeen Marine Laboratory)

Processing Status

banked

Online delivery of data

Download available - Ocean Data View (ODV) format

Project(s)

Data Identifiers

Originator's Identifier	SC16/95/0278
BODC Series Reference	462966

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm)	1995-11-25 19:12
End Time (yyyy-mm-dd hh:mm)	-
Nominal Cycle Interval	1.0 decibars

Spatial Co-ordinates

Latitude	59.28500 N ( 59° 17.1' N )
Longitude	1.00130 W ( 1° 0.1' W )
Positional Uncertainty	Unspecified
Minimum Sensor or Sampling Depth	0.99 m
Maximum Sensor or Sampling Depth	108.94 m
Minimum Sensor or Sampling Height	13.06 m
Maximum Sensor or Sampling Height	121.01 m
Sea Floor Depth	122.0 m
Sea Floor Depth Source	-
Sensor or Sampling Distribution	Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum	Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum	Instantaneous - Depth measured below water line or instantaneous water body surface

Parameters

BODC CODE	Rank	Units	Title
CNDCST01	1	Siemens per metre	Electrical conductivity of the water body by CTD
PRESPR01	1	Decibars	Pressure (spatial coordinate) exerted by the water body by profiling pressure sensor and correction to read zero at sea level
PSALST01	1	Dimensionless	Practical salinity of the water body by CTD and computation using UNESCO 1983 algorithm
TEMPST01	1	Degrees Celsius	Temperature of the water body by CTD or STD

Definition of Rank
Rank 1 is a one-dimensional parameter Rank 2 is a two-dimensional parameter Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Public domain data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

The recommended acknowledgment is

"This study uses data from the data source/organisation/programme, provided by the British Oceanographic Data Centre and funded by the funding body."

Narrative Documents

Sea-Bird SBE 25 SEALOGGER CTD

The SBE 25 SEALOGGER is a research-quality CTD profiling system used for coastal, estuarine and, can also be a practical option, for deep-water work. It is easily configured in the field for a wide range of auxiliary sensors. The SEALOGGER is self-powered, requires no conductive cable, and is designed for use up to 6800 meters (10,000 psia). It uses the SBE3F temperature and SBE4 conductivity sensors as well as having an external strain gauge pressure sensor. It provides pump-controlled T-C ducted flow, samples at 8 Hz, records internally and provides simultaneous real-time data via its built-in RS-232 interface.

The standard CTD unit comes with a plastic housing (rated to 600 m), although this can be replaced by aluminium housing for depths up to 6800 m.

Specifications

Parameter	SBE 25
Temperature	Range: -5 to +35 °C Accuracy: 0.002 °C Resolution: 0.0003 °C
Conductivity	Range: 0 to 7 S m^-1 (0 to 70 mmho cm^-1) Accuracy: 0.0003 S m^-1 Resolution: 0.00004 S m^-1
Strain gauge pressure sensor	Range: 0 to 20, 100, 350, 600, 1000, 2000, 3500, 7000 metres (expressed in metres of deployment depth capability) Accuracy: 0.1% of full scale range Resolution: 0.015% of full scale range

Parameter

SBE 25

Temperature

Range: -5 to +35 °C

Accuracy: 0.002 °C

Resolution: 0.0003 °C

Conductivity

Range: 0 to 7 S m^-1 (0 to 70 mmho cm^-1)

Accuracy: 0.0003 S m^-1

Resolution: 0.00004 S m^-1

Strain gauge pressure sensor

Range: 0 to 20, 100, 350, 600, 1000, 2000, 3500, 7000 metres (expressed in metres of deployment depth capability)

Accuracy: 0.1% of full scale range

Resolution: 0.015% of full scale range

Options and accessories

Additional sensors can be attached to the CTD, including:

Dissolved Oxygen (SBE 43 DO Sensor)
pH (SBE 18 pH Sensor or SBE 27 pH/ORP Sensor)
fluorescence
radiance (PAR)
light transmission
optical backscatter (turbidity)

The SBE 5T titanium pump can be used in place of SBE 5P pump. Further details can be found in the manufacturer's SBE 25 instrument specification.

BODC Processing

Data were received by BODC in ASCII format files. The CTD files were reformatted to the internal QXF format using a BODC transfer function. The following table shows how the variables within the file were mapped to the appropriate BODC parameter codes:

Original parameter name	Original Units	Description	BODC Parameter Code	BODC Units	Comments
Pressure	dbar	Pressure exerted by the water column	PRESPR01	dbar	-
Temperature	degrees Celsius	Temperature of the water column	TEMPST01	degrees Celsius	-
Conductivity	Milli siemens per centimeter,	Electrical conductivity of the water column	CNDCST01	Siemens per metre	Conversion by transfer
-	-	Practical salinity of the water column	PSALST01	Dimensionless	Calculated by BODC

Following transfer to QXF, the data were screened using BODC's in-house visualisation software, EDSERPLO. Any data considered as suspect were flagged 'M'. Flags from the originator marking suspect data were retained during transfer and flagged 'L'.

Originator's Data Processing

Sampling strategy

A total of 68 CTD cast were performed during this cruise as part of a hydrographic survey along the shelf edge of the Shetland island. Unfotunatly it was only possible to sample part of the standard Faroe-Shetland Channel.

Data Processing

FRS applied the standard manufacturers' calibrations to all data, and produced ASCII files for submission to BODC.

Project Information

No Project Information held for the Series

Data Activity or Cruise Information

Cruise

Cruise Name	1695S
Departure Date	1995-11-25
Arrival Date	1995-12-15
Principal Scientist(s)	Bill Turrell (Scottish Office Agriculture Environment and Fisheries Department Aberdeen Marine Laboratory), David G Reid (Scottish Office Agriculture Environment and Fisheries Department Aberdeen Marine Laboratory), Phil A Gillibrand (Scottish Office Agriculture Environment and Fisheries Department Aberdeen Marine Laboratory)
Ship	FRV Scotia

Complete Cruise Metadata Report is available here

Fixed Station Information

Station Name	JONSIS Line
Category	Offshore route/traverse

Joint North Sea Information System (JONSIS)

As part of the Joint Oceanographic North Sea Data Acquisition Project (JONSDAP), a line of sample stations east of Orkney to the centre of the North Sea was established (1976). This section is commonly known as the JONSIS (Joint Oceanographic North Sea Information System) line and has been sampled annually over the past 30 years. Initially, there were only 10 stations 1-10, two further stations were added, 1a and 6a, in later years.

At present Marine Scotland monitors this line three times a year: Sampling is usually conducted in April, September and December.

These data provide information on long term variations in key variables.
Monitoring data include: Ocean profiles of temperature, salinity and nutrients.

Map of standard stations

JONSIS Line stations

Listed below are details of the standard hydrographic stations that form the JONSIS line (start Point on Orkney to the centre of the North Sea). This transect is monitored by Marine Scotland.

Station name	Latitude	Longitude	Depth	Spacing
JO 1	59°17.00'N	02°14.00'W	75 m	-
JO 1A	59°17.00'N	02°5.00'W	90 m	4.59 nm
JO 2	59°17.00'N	01°56.00'W	100 m	4.59 nm
JO 3	59°17.00'N	01°56.00'W	80 m	4.08 nm
JO 4	59°17.00'N	01°40.00'W	90 m	4.08 nm
JO 5	59°17.00'N	01°30.00'W	95 m	5.10 nm
JO 6	59°17.00'N	01°20.00'W	110 m	5.10 nm
JO 6A	59°17.00'N	01°10.00'W	120 m	5.10 nm
JO 7	59°17.00'N	01°0.00'W	125 m	5.10 nm
JO 8	59°17.00'N	00°40.00'W	120 m	10.20 nm
JO 9	59°17.00'N	00°20.00'W	140 m	10.20 nm
JO10	59°17.00'N	00°0.00'W	135 m	10.20 nm

Related Fixed Station activities are detailed in Appendix 1

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag	Description
Blank	Unqualified
<	Below detection limit
>	In excess of quoted value
A	Taxonomic flag for affinis (aff.)
B	Beginning of CTD Down/Up Cast
C	Taxonomic flag for confer (cf.)
D	Thermometric depth
E	End of CTD Down/Up Cast
G	Non-taxonomic biological characteristic uncertainty
H	Extrapolated value
I	Taxonomic flag for single species (sp.)
K	Improbable value - unknown quality control source
L	Improbable value - originator's quality control
M	Improbable value - BODC quality control
N	Null value
O	Improbable value - user quality control
P	Trace/calm
Q	Indeterminate
R	Replacement value
S	Estimated value
T	Interpolated value
U	Uncalibrated
W	Control value
X	Excessive difference

SeaDataNet Quality Control Flags