Metadata Report for BODC Series Reference Number 1088606

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Open Data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

If the Information Provider does not provide a specific attribution statement, or if you are using Information from several Information Providers and multiple attributions are not practical in your product or application, you may consider using the following:

"Contains public sector information licensed under the Open Government Licence v1.0."

Narrative Documents

Instrument Descriptions

CTD Unit and Auxiliary Sensors

Sea-Bird Electronics SBE 911 and SBE 917 series CTD profilers

The SBE 911 and SBE 917 series of conductivity-temperature-depth (CTD) units are used to collect hydrographic profiles, including temperature, conductivity and pressure as standard. Each profiler consists of an underwater unit and deck unit or SEARAM. Auxiliary sensors, such as fluorometers, dissolved oxygen sensors and transmissometers, and carousel water samplers are commonly added to the underwater unit.

Underwater unit

The CTD underwater unit (SBE 9 or SBE 9 plus) comprises a protective cage (usually with a carousel water sampler), including a main pressure housing containing power supplies, acquisition electronics, telemetry circuitry, and a suite of modular sensors. The original SBE 9 incorporated Sea-Bird's standard modular SBE 3 temperature sensor and SBE 4 conductivity sensor, and a Paroscientific Digiquartz pressure sensor. The conductivity cell was connected to a pump-fed plastic tubing circuit that could include auxiliary sensors. Each SBE 9 unit was custom built to individual specification. The SBE 9 was replaced in 1997 by an off-the-shelf version, termed the SBE 9 plus, that incorporated the SBE 3 plus (or SBE 3P) temperature sensor, SBE 4C conductivity sensor and a Paroscientific Digiquartz pressure sensor. Sensors could be connected to a pump-fed plastic tubing circuit or stand-alone.

Temperature, conductivity and pressure sensors

The conductivity, temperature, and pressure sensors supplied with Sea-Bird CTD systems have outputs in the form of variable frequencies, which are measured using high-speed parallel counters. The resulting count totals are converted to numeric representations of the original frequencies, which bear a direct relationship to temperature, conductivity or pressure. Sampling frequencies for these sensors are typically set at 24 Hz.

The temperature sensing element is a glass-coated thermistor bead, pressure-protected inside a stainless steel tube, while the conductivity sensing element is a cylindrical, flow-through, borosilicate glass cell with three internal platinum electrodes. Thermistor resistance or conductivity cell resistance, respectively, is the controlling element in an optimized Wien Bridge oscillator circuit, which produces a frequency output that can be converted to a temperature or conductivity reading. These sensors are available with depth ratings of 6800 m (aluminium housing) or 10500 m (titanium housing). The Paroscientific Digiquartz pressure sensor comprises a quartz crystal resonator that responds to pressure-induced stress, and temperature is measured for thermal compensation of the calculated pressure.

Additional sensors

Optional sensors for dissolved oxygen, pH, light transmission, fluorescence and others do not require the very high levels of resolution needed in the primary CTD channels, nor do these sensors generally offer variable frequency outputs. Accordingly, signals from the auxiliary sensors are acquired using a conventional voltage-input multiplexed A/D converter (optional). Some Sea-Bird CTDs use a strain gauge pressure sensor (Senso-Metrics) in which case their pressure output data is in the same form as that from the auxiliary sensors as described above.

Deck unit or SEARAM

Each underwater unit is connected to a power supply and data logging system: the SBE 11 (or SBE 11 plus) deck unit allows real-time interfacing between the deck and the underwater unit via a conductive wire, while the submersible SBE 17 (or SBE 17 plus) SEARAM plugs directly into the underwater unit and data are downloaded on recovery of the CTD. The combination of SBE 9 and SBE 17 or SBE 11 are termed SBE 917 or SBE 911, respectively, while the combinations of SBE 9 plus and SBE 17 plus or SBE 11 plus are termed SBE 917 plus or SBE 911 plus.

Specifications

Specifications for the SBE 9 plus underwater unit are listed below:

Further details can be found in the manufacturer's specification sheet.

Paroscientific Absolute Pressure Transducers Series 3000 and 4000

Paroscientific Series 3000 and 4000 pressure transducers use a Digiquartz pressure sensor to provide high accuracy and precision data. The sensor comprises a quartz crystal resonator that responds to pressure-induced stress, and temperature is measured for thermal compensation of the calculated pressure.

The 3000 series of transducers includes one model, the 31K-101, whereas the 4000 series includes several models, listed in the table below. All transducers exhibit repeatability of better than ±0.01% full pressure scale, hysteresis of better than ±0.02% full scale and acceleration sensitivity of ±0.008% full scale /g (three axis average). Pressure resolution is better than 0.0001% and accuracy is typically 0.01% over a broad range of temperatures.

Differences between the models lie in their pressure and operating temperature ranges, as detailed below:

Further details can be found in the manufacturer's specification sheet.

BODC Processing

The primary data (conductivity, temperature salinity) were received in a structured matlab format and converted into BODC internal format. The auxiliary sensor data will be processed separately. Potential temperature of the water body was derived by computation using UNESCO 1983 algorithm, σθ was derived by computation from salinity and potential temperature also using UNESCO 1983 algorithm. The following table shows how the variables within the matlab file were mapped to appropriate BODC parameter codes:

The reformatted data were visualised using the in-house EDSERPLO software. The data were screened and quality control flags were applied to data as necessary. Overall there were no quality issues and very few flags were added.

References

Fofonoff, N.P. and Millard, R.C., 1983. Algorithms for computations of fundamental properties of seawater. UNESCO Technical Papers in Marine Science, No.44, 53pp.

Originator's Data Processing

Sampling Strategy

Fifty five CTD profiles were performed during the cruise. The launch and recovery of the CTDs was done relatively slowly, especially in bad weather, due to the nature of the winch system on the ship. There was also a delay of a few minutes whilst the winch system was switched from box control to lab control at approximately 100 m of wire out. In addition, at stations where Vertical Microstructure Profilers (VMPs) were deployed, the CTD deployment duration had to approximately match the VMP cast duration, within 1.5 hours. There were several problems which occurred during the deployment of the CTDs. CTD007 was aborted due to early weight release of the VMP, CTD035 was delayed due bad weather and was made shallow (1875 m) due to VMP time constraint, CTD027 had a shallow bottom, CTD045 was aborted due to problem with the hydroboom, CTD054 was stopped due to bad weather, and during CTD048, the Sea-Bird software crashed and had to be restarted.

Data processing

The files were produced by Seasave and initial data processing was performed using Sea-Bird processing software. Firstly, the raw data were converted into physical units using 'DatCnv', the surface soak was removed from the data and the surface pressure offset obtained from the first 30 readings was applied. Temporal shifts were then applied to align the sensor readings using 'AlignCTD'. Corrections for the thermal mass of the cell were made using 'CellTM' and the output from the 'AlignCTD', in order to minimise salinity spiking in steep vertical gradients due to temperature/conductivity mismatch.

After the Sea-Bird processing, further processing was undertaken using the National Oceanography Centre's Mstar software package. Firstly, the data were averaged to 1 Hz, then the practical salinity and potential temperature were calculated. The downcast data were extracted, gaps were interpolated and the data were then averaged to 2 dbar. All profiles were visually checked to detect any possible anomalies, and profiles were also plotted on top of each other in order to detect any possible sensor drift. A number of small localised spikes were detected in the conductivity/salinity profiles and these were removed and replaced by null values.

Further details of the originator's processing can be found in the cruise report.

Field Calibrations

Salinity

Between five and seven Niskin bottles were sampled for salinity at each station. Surface and bottom Niskin bottles were chosen as well as a couple of bottles at tracer cluster depths (DIMES project released an inert chemical tracer at the upstream edge of the study area in late 2009). The differences in salinity between the bottle salinities and the sensor salinities were found to be relatively scattered, but most differences were within ± 0.002. No clear trend or pattern in pressure or time dependence was identified, and both sensors showed similar behaviour. θ-S profiles were used to detect possible sensor drift, and all θ-S characteristics of bottom water sampled during the cruise were found to fall within the same narrow band. There was a change noted in the salinity from the beginning to end of the cruise, with fresher salinities at the beginning, however, this was thought to be a real change as it did not appear to be a constant shift and the difference was also consistent with previous bottom water studies. Based upon the analyses conducted, it was concluded that further calibration of the salinity data was not required, as the calibration applied would be less than the target accuracy.

Project Information

Diapycnal and Isopycnal Mixing Experiment in the Southern Ocean (DIMES) project document

DIMES is a US/UK field program aimed at measuring diapycnal and isopycnal mixing in the Southern Ocean, along the tilting isopycnals of the Antarctic Circumpolar Current.

The Meridional Overturning Circulation (MOC) of the ocean is a critical regulator of the Earth's climate processes. Climate models are highly sensitive to the representation of mixing processes in the southern limb of the MOC, within the Southern Ocean, although the lack of extensive in situ observations of Southern Ocean mixing processes has made evaluation of mixing somewhat difficult. Theories and models of the Southern Ocean circulation have been built on the premise of adiabatic flow in the ocean interior, with diabatic processes confined to the upper-ocean mixed layer. Interior diapycnal mixing has often been assumed to be small, but a few recent studies have suggested that diapycnal mixing might be large in some locations, particularly over rough bathymetry. Depending on its extent, this interior diapycnal mixing could significantly affect the overall energetics and property balances for the Southern Ocean and in turn for the global ocean. The goals of DIMES are to obtain measurements that will help us quantify both along-isopycnal eddy-driven mixing and cross-isopycnal interior mixing.

DIMES includes tracer release, isopycnal following RAFOS floats, microstructure measurements, shearmeter floats, EM-APEX floats, a mooring array in Drake Passage, hydrographic observations, inverse modeling, and analysis of altimetry and numerical model output.

DIMES is sponsored by the National Science Foundation (U.S.), Natural Environment Research Council (U.K) and British Antarctic Survey (U.K.)

For more information please see the official project website at DIMES

Data Activity or Cruise Information

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

Fixed Station Information

World Ocean Circulation Experiment (WOCE) Southern Repeat Section 1 - South America to West Antarctic Peninsula

WOCE established a repeat hydrographic section across Drake Passage and designated it SR1 (also known as A21). The section is located between the Southern tip of South America and the West Antarctic Peninsula within a bounding box of 55° 19.40' S, 68° 15.80' W (North-Western corner) and 64° 8.52' S, 63° 4.80' W (South-Eastern corner).

A table of cruises which occupied SR1 is presented below with links to the relevant cruise reports (where available).

Related Fixed Station activities are detailed in Appendix 1

Fixed Station Information

Drake Passage

The World Ocean Circulation Experiment (WOCE, 1990-1998) was a major international experiment which made measurements and undertook modelling studies of the deep oceans in order to provide a much improved understanding of the role of ocean circulation in changing and ameliorating the Earth's climate.

The Drake Passage is the narrowest constriction of the Antarctic Circumpolar Current (ACC) - the largest current in the world and connects all three major oceanic basins both horizontally and vertically, thus being a key control in the global overturning circulation.Within the Drake Passage, two repeat hydrographic sections (SR1 and SR1b) were established by WOCE. These were designed to extend measurements collected earlier by the International Southern Ocean Studies (ISOS) programme and have continued beyond the WOCE time-frame.

The original section was SR1 (which also covers part of the A21 one time survey track). Subsequently, the section was shifted to the east (and designated SR1b) in order for it to lie on a satellite ground track as illustrated in the image below.

In addition to the hydrographic measurements, UK research in Drake Passage also includes a network of coastal and deep tide gauges, analysis of satellite altimeter data, and state-of-the-art global numerical modeling.

Related Fixed Station activities are detailed in Appendix 2

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: Drake Passage - WOCE SR1

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.

Appendix 2: Drake Passage

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.