Metadata Report for BODC Series Reference Number 1902192

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."

Narrative Documents

Turner Designs 10AU Field Fluorometer

The Turner Designs 10AU is designed for continuous-flow monitoring or discrete sample analyses of fluorescent species. A variety of optical kits with appropriate filters and lamps are available for a wide range of applications. Individual filters and lamps are also available for customised applications.

Standard optical kits include those for chlorophyll-a (extracted and/or in vivo), phycocyanin, phycoerythrin, CDOM, ammonium, rhodamine and fluorescein dye tracing, crude oil, refined oil, histamine and optical brighteners.

The instrument's light source is a 4 watt lamp and the detector is a photomultiplier tube with a standard detection range of 300-650 nm. A red-sensitive version with a detetion range of 185-970 nm is also available.

Specifications

Further details can be found in the manufacturer's specification sheet.

Kongsberg Seatex Seapath 200 GPS and Gyrocompass

The Seapath 200 is a highly accurate, real-time heading, attitude and position information system that integrates the best signal characteristics of Inertial Measurement Units (IMU) and Global Positioning System (GPS), using a differential GPS method to acquire this data.

The high-rate motion data is obtained from the Seatex MRU5 inertial sensor and two fixed baseline GPS carrier-phase receivers. The raw data is integrated in a Kalman filter in the Seapath Processing Unit. The IMU contains an accurate linear accelerometer and Bosch Coriolis force angular rate gyros (CFG).

This system is equipped to utilise up to six different DGPS reference stations, it checks for consistency within measurements from the different sensors to ensure reliability and rejects noisy data or reports its inaccuracy. The data is available through various output protocols, RS-232, RS-422 and Ethernet.

This instrument is no longer in production; the main characteristics are presented below, and the specification sheet can be accessed here Kongsberg Seatex Seapath 200 .

Specifications

BAS Long Term Monitoring and Survey Cruise RRS James Clark Ross JR20071029 (JR184) Underway Surface Hydrography Instrumentation Document

The sea surface hydrographical suite of sensors was fed by the pumped-seawater, non-toxic supply. The seawater intake was located approximately 7 m below the sea surface. The SBE 48 sea surface temperature sensor was located towards the hull near the seawater intake. All other sensors were located in the clean seawater laboratory on the main deck, directly above the intake pipe.

Litre Meter flow meter

A flow meter used to monitor water flow rates for pumped systems such as ships' continuous seawater supplies.

Sea-Bird SBE 48 Hull Temperature Sensor

The SBE 48 is a high-accuracy temperature recorder with non-volatile memory, designed for shipboard determination of sea surface temperature. Mounted with magnets just below the water line, the SBE 48's temperature sensor is in contact with the inside of the ship's hull. The SBE 48's internal battery runs the real-time clock and can be used to power the instrument for very short deployments; external power is recommended for typical deployments.

Data are recorded in memory and can also be output in real-time in engineering units. Memory capacity exceeds 4.7 million samples of temperature and time; this yields approximately 54 days of data when sampling every 1 sec.

Specifications

Further details can be found in the manufacturer's specification sheet.

SeaBird MicroTSG Thermosalinograph SBE 45

The SBE45 MicroTSG is an externally powered instrument designed for shipboard measurement of temperature and conductivity of pumped near-surface water samples. The instrument can also compute salinity and sound velocity internally.

The MicroTSG comprises a platinum-electrode glass conductivity cell and a stable, pressure-protected thermistor temperature sensor. It also contains an RS-232 port for appending the output of a remote temperature sensor, allowing for direct measurement of sea surface temperature.

The instrument can operate in Polled, Autonomous and Serial Line Sync sampling modes:

• Polled sampling: the instrument takes one sample on command
• Autonomous sampling: the instrument samples at preprogrammed intervals and does not enter quiescence (sleep) state between samples
• Serial Line Sync: a pulse on the serial line causes the instrument to wake up, sample and re-enter quiescent state automatically

Specifications

Further details can be found in the manufacturer's specification sheet.

BAS Long Term Monitoring and Survey Cruise RRS James Clark Ross JR20071029 (JR184) Underway Surface Hydrography Processing Procedures Document

Originator's Data Processing

The originator did not process the data during the cruise, the only procedures implemented throughout the cruise consisted of data retrieval from the previous 24h and logging those into sub directories on the ship's intranet system.

The sea surface hydrography measurements were performed by a number of instruments connected to the ship's flow through system and a temperature sensor located near the flow through intake, at the hull, at 7 m depth.

The originator sent one file containing the sea surface data: Surface temperature by the thermosalinograph and hull sensor, chlorophyll, salinity, conductivity, sound velocity and pump flow rate.

The processing procedures carried out by the originator include:

• check for duplicate dates and times
• standardising time
• check for gaps in data
• check data against defined thresholds
• flagging
• unit conversion

Files delivered to BODC

BODC Data Processing

All sea surface hydrography parameters, were transferred to internal QXF format and matched against BODC codes, as presented in the table below. There was no need to apply unit conversions as the originator's units were similar to the units described on the BODC parameter dictionary.

BODC processing procedures included loading of data and reduction through averaging, visual screening and flagging of anomalous values.

The originator's variables were mapped to appropriate BODC parameter codes as follows:

jr184_ocl_exactsec

Surface hydrography data were screened and N flags applied to absent data values.

Project Information

No Project Information held for the Series

Data Activity or Cruise Information

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

Fixed Station Information

Western Core Box

The British Antarctic Survey undertakes cruises to determine krill biomass as part of the ongoing assessment of the status of the marine ecosystem in the region of South Georgia. This unique time series, known as the Western Core Box, which has taken place since 1996 is funded by Natural Environment Research Council (NERC) British Antarctic Survey Long Term Monitoring programme.

The survey area is located in an on and off shelf survery area (figure.1), which comprises of an acoustic grid survey of 8 transects each of 80 km in length. Standard data collection includes underway biological echosounder acoustic transaects, CTD profiles, stratified and targetted RMT8 hauls of macrozooplankton and micronekton and a set of moorings which provide temporal coverage and a year round set of observations.

The specific aims of the WCB are:

• To quantify the interannual variability and long-term change in the mesoscale distribution and abundance of Antarctic krill.
• To quantify the the interannual variability and long-term change in the mesoscale distribution and abundance of other plankton/micronekton.
• To examine interannual varaibility in the context of environmental variability (climate variability).
• To examine prey availiability in the context of predator and fishery demand.

Figure 1. Western Core Box Survey Area (BAS, 2017).

A list of Western Core Box cruises are shown below.

References

British Antarctic Survey (2017). POETS-WCB. Available at: https://www.bas.ac.uk/project/poets-wcb/ [Accessed 2017].

Related Fixed Station activities are detailed in Appendix 1

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: Western Core Box

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.