Search the data

Metadata Report for BODC Series Reference Number 920256


Metadata Summary

Data Description

Data Category CTD or STD cast
Instrument Type
NameCategories
Neil Brown MK2 conductivity temperature and depth system  CTD; water temperature sensor; salinity sensor
Instrument Mounting research vessel
Originating Country Germany
Originator Mr Thomas Raabe
Originating Organization University of Hamburg, Department of Chemistry
Processing Status banked
Online delivery of data Download available - Ocean Data View (ODV) format
Project(s) OMEX I
 

Data Identifiers

Originator's Identifier 301C2
BODC Series Reference 920256
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 1993-06-29 15:13
End Time (yyyy-mm-dd hh:mm) -
Nominal Cycle Interval 2.0 decibars
 

Spatial Co-ordinates

Latitude 49.17900 N ( 49° 10.7' N )
Longitude 12.95700 W ( 12° 57.4' W )
Positional Uncertainty 0.0 to 0.01 n.miles
Minimum Sensor or Sampling Depth 0.99 m
Maximum Sensor or Sampling Depth 1691.5 m
Minimum Sensor or Sampling Height 138.5 m
Maximum Sensor or Sampling Height 1829.01 m
Sea Floor Depth 1830.0 m
Sea Floor Depth Source DATAHEAD
Sensor or Sampling Distribution Variable common depth - All sensors are grouped effectively at the same depth, but this depth varies significantly during the series
Sensor or Sampling Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODERankUnitsTitle
POTMCV011Degrees CelsiusPotential temperature of the water body by computation using UNESCO 1983 algorithm
PRESPR011DecibarsPressure (spatial coordinate) exerted by the water body by profiling pressure sensor and correction to read zero at sea level
PSALST011DimensionlessPractical salinity of the water body by CTD and computation using UNESCO 1983 algorithm
SIGTPR011Kilograms per cubic metreSigma-theta of the water body by CTD and computation from salinity and potential temperature using UNESCO algorithm
TEMPST011Degrees CelsiusTemperature of the water body by CTD or STD

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Public domain data

These data have no specific confidentiality restrictions for users. However, users must acknowledge data sources as it is not ethical to publish data without proper attribution. Any publication or other output resulting from usage of the data should include an acknowledgment.

The recommended acknowledgment is

"This study uses data from the data source/organisation/programme, provided by the British Oceanographic Data Centre and funded by the funding body."


Narrative Documents

Neil Brown MKII CTD

This instrument was designed for precise fine scale measurements of salinity and temperature in the deep ocean.

The conductivity sensor is a miniature four electrode cell and the temperature is measured by a combination of of a miniature fast thermistor and a platinum resistance thermometer. Pressure is measured using a strain gage bridge transducer.

The precise value of each parameter is determined by measuring the ratio of the sensor interface output voltage to the input voltage.

The original specifications are as follow:

Sampling speed 30 sec-1
Resolution ± 0.0005°C
Sensor response time 1/30 second
Noise less than ± 1 least significant bit
Stability

Temperature: ± 0.003°C

Conductivity: ± 0.005 mmho

Pressure: ± 1% of full scale

This instrument is no longer in production and it is not known if support and maintenance are still available

References Cited

Brown, Neil L., 1974. A precision CTD microprofiler. IEEE International Conference on Engineering in the Ocean Environment, Ocean 74, pp 270-278.

FS Valdivia 137 CTD Data Documentation

Instrumentation

The CTD profiles were taken with a Neil Brown Mk2 CTD incorporating a pressure sensor, conductivity cell and platinum resistance thermometer. The CTD unit was mounted vertically in the centre of a protective cage. Attached to the bars of the frame was a Chelsea fluorometer. However, this failed to return any useful data.

A rosette sampler fitted with 12, 2.5 litre Niskin bottles was mounted above the frame.

Data Acquisition

The data were logged using the EG&G CTDACQ program running on a PC.

On-Board Data Processing

The raw data logged by CTDACQ were written onto Quarter Inch Cartridge tapes using the Everex tape streamer backup facility.

Post-Cruise Processing

Reformatting

The raw data were extracted from the Quarter Inch Cartridge tapes on a PC running the Everex software at the British Antarctic Survey in Cambridge and transferred to BODC as compressed files on floppy disk. The Chelsea Instruments CTDPOST program, which is compatible with the EG&G format, was used to convert the binary files into 1db binned calibrated files in ASCII. These were transferred to a UNIX workstation and converted into the BODC internal format (PXF) to allow the use of in-house software tools, notably the workstation graphics editor.

Editing

Using a custom in-house graphics editor, the limits of the downcasts were manually flagged. In addition, spikes on all the downcast channels were manually flagged 'suspect' by modification of the associated quality control flag. In this way none of the original data values were edited or deleted.

Once screened, the CTD downcasts were loaded into a database under the Oracle relational database management system.

Calibration

Pressure

The pressure offset is usually determined by looking at the pressures recorded when the CTD was clearly logging in air. Few data points were logged in air and therefore the minimum pressure of each cast was used to derive a pressure correction. Using the logic that at the start of the cast the pressure should read about 1.5db a consistent pressure offset was observed throughout the cruise thus:

Pcorrected = Pobserved * 1.72
Temperature

A CTD temperature calibration exercise was carried out using data from the deep sea classical reversing thermometers included with the CTD data. The following offsets were determined:

Calibration Applied to
Tcorrected = Tobserved + 0.11 CTDs 100, 101, 1C1, 200C1, 200C2, 201C1, 201C2, 300C1,
300C2, 301C1, 301C2, 400C1, 400C2, 401C1, 401C2
Tcorrected = Tobserved + 0.034 CTDs 110, 111, 112, 113, 115, 600C1, 600C2, 610C1, 610C2,
611C1, 611C2, 620C1, 620C2, 700C1, 700C2, 710C1, 710C2,
720C1, 720C2, 800C1, 800C2
Tcorrected = Tobserved + 0.048 CTDs 210C1, 210C2, 211, 212, 213, 214, 215, 310C1, 310C2,
311, 312, 313, 314, 315, 410C1, 410C2, 411,412, 413, 414,
415, 500C1, 500C2, 510C1, 510C2, 511, 512, 513, 514, 515

However, comparison of the profiles from the deep casts with data from other cruises known to be of good quality showed that the temperatures as recorded were much nearer the true values than the data with the corrections described above applied. Consequently, the reversing thermometer data have been deemed unreliable and no corrections have been applied to the temperature data.

Salinity

In order to calibrate the conductivity sensor of the probe, water samples were taken at selected stations and analysed on board using a salinometer. From these, the following offsets were determined for the CTD salinity data:

Group 1: S corrected = Sobserved + 0.034
Group 2: S corrected = Sobserved + 0.079
Group 3: S corrected = Sobserved + 0.050

However, a comparison of deep station T/S curves with other cruises known to be of good quality showed the CTD on this cruise to be reading 0.016 PSU high, not low as implied by the corrections above. It has therefore been concluded that the bottle salinity data from this cruise are unreliable and a correction of -0.016 PSU has been applied to all CTD salinities from this cruise.

Chlorophyll

It has not been feasible to retrieve the fluorometer data. The Chelsea Instruments processing software refused to recognise the presence of a fluorometer channel in the raw data. Data were only available for a small number of casts due to the instrument flooding when the top plate deformed under a pressure of 6000 db. Consequently, it was not deemed cost effective to pursue the only options open (purchasing the EG&G software or writing custom software) to recover such a small amount of data.

Data Reduction

Once all screening and calibration procedures were completed, the data set was binned to 2 db (casts deeper than 100 db) or 1db (casts shallower than 100 db). The binning algorithm excluded any data points flagged suspect and attempted linear interpolation over gaps up to 3 bins wide. If any gaps larger than this were encountered, the data in the gaps were set null.

Downcast values corresponding to the bottle firing depths were incorporated into the database.


Project Information

Ocean Margin EXchange (OMEX) I

Introduction

OMEX was a European multidisciplinary oceanographic research project that studied and quantified the exchange processes of carbon and associated elements between the continental shelf of western Europe and the open Atlantic Ocean. The project ran in two phases known as OMEX I (1993-1996) and OMEX II - II (1997-2000), with a bridging phase OMEX II - I (1996-1997). The project was supported by the European Union under the second and third phases of its MArine Science and Technology Programme (MAST) through contracts MAS2-CT93-0069 and MAS3-CT97-0076. It was led by Professor Roland Wollast from Université Libre de Bruxelles, Belgium and involved more than 100 scientists from 10 European countries.

Scientific Objectives

The aim of the Ocean Margin EXchange (OMEX) project was to gain a better understanding of the physical, chemical and biological processes occurring at the ocean margins in order to quantify fluxes of energy and matter (carbon, nutrients and other trace elements) across this boundary. The research culminated in the development of quantitative budgets for the areas studied using an approach based on both field measurements and modeling.

OMEX I (1993-1996)

The first phase of OMEX was divided into sub-projects by discipline:

  • Physics
  • Biogeochemical Cycles
  • Biological Processes
  • Benthic Processes
  • Carbon Cycling and Biogases

This emphasises the multidisciplinary nature of the research.

The project fieldwork focussed on the region of the European Margin adjacent to the Goban Spur (off the coast of Brittany) and the shelf break off Tromsø, Norway. However, there was also data collected off the Iberian Margin and to the west of Ireland. In all a total of 57 research cruises (excluding 295 Continuous Plankton Recorder tows) were involved in the collection of OMEX I data.

Data Availability

Field data collected during OMEX I have been published by BODC as a CD-ROM product, entitled:

  • OMEX I Project Data Set (two discs)

Further descriptions of this product and order forms may be found on the BODC web site.

The data are also held in BODC's databases and subsets may be obtained by request from BODC.


Data Activity or Cruise Information

Cruise

Cruise Name VLD137
Departure Date 1993-06-23
Arrival Date 1993-07-16
Principal Scientist(s)Thomas Raabe (University of Hamburg, Department of Chemistry)
Ship Valdivia

Complete Cruise Metadata Report is available here


Fixed Station Information

Fixed Station Information

Station NameOMEX I site OMEX2
CategoryOffshore area
Latitude49° 11.46' N
Longitude12° 48.00' W
Water depth below MSL1418.0 m

OMEX I Moored Instrument and CTD site OMEX2

OMEX2 was one of four fixed stations for the OMEX I project. It was visited by twelve cruises and collected a variety of data during the period June 1993 to October 1995. These include:

  • Mooring deployments - Aandeera current meters with transmissometers
  • CTD casts
  • Net trawls
  • Plankton recorders
  • Cores
  • Water samples

The data collected a site OMEX2 lay within a box bounded by co-ordinates 49° 6.72'N, 013° 16.03'W at the southwest corner and 49° 17.2'N, 012° 44.4'W at the northeast corner, with an approximate depth of 1500 metres.

Related Fixed Station activities are detailed in Appendix 1


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
Q value below limit of quantification

Appendix 1: OMEX I site OMEX2

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.

Series IdentifierData CategoryStart date/timeStart positionCruise
444382Multiple data types -fixed platform1993-06-24 20:29:0049.1885 N, 12.7333 WFS Poseidon PO200_7
319390Currents -subsurface Eulerian1993-06-27 11:49:0049.2872 N, 12.8193 WFS Poseidon PO200_7
319389Currents -subsurface Eulerian1993-06-27 12:27:0049.2872 N, 12.8193 WFS Poseidon PO200_7
920244CTD or STD cast1993-06-29 14:29:0049.193 N, 12.944 WValdivia VLD137
883705CTD or STD cast1993-09-25 07:41:0049.22783 N, 12.80017 WRV Belgica BG9322A
883717CTD or STD cast1993-09-25 12:36:0049.25967 N, 12.80733 WRV Belgica BG9322A
1271492Water sample data1993-09-25 12:53:0049.25973 N, 12.80741 WRV Belgica BG9322A
883729CTD or STD cast1993-09-25 15:46:0049.26067 N, 12.81033 WRV Belgica BG9322A
883730CTD or STD cast1993-09-25 17:22:0049.1975 N, 12.74367 WRV Belgica BG9322A
1271511Water sample data1993-09-25 17:57:0049.1975 N, 12.74369 WRV Belgica BG9322A
883742CTD or STD cast1993-09-25 19:55:0049.23033 N, 12.794 WRV Belgica BG9322A
1271523Water sample data1993-09-25 20:18:0049.23031 N, 12.79403 WRV Belgica BG9322A
914969CTD or STD cast1993-10-21 08:46:0049.18667 N, 12.81967 WRV Pelagia PE093
908153CTD or STD cast1994-01-05 13:06:0049.18333 N, 12.81 WFS Meteor M27_1
908165CTD or STD cast1994-01-05 16:47:0049.17 N, 12.79167 WFS Meteor M27_1
444369Currents -subsurface Eulerian1994-01-11 08:41:0049.1883 N, 12.795 WFS Meteor M27_1
444370Currents -subsurface Eulerian1994-01-11 08:55:0049.1883 N, 12.795 WFS Meteor M27_1
908233CTD or STD cast1994-01-11 17:01:0049.21167 N, 12.88333 WFS Meteor M27_1
887362CTD or STD cast1994-04-16 06:51:0049.4215 N, 12.7765 WRRS Charles Darwin CD85
887301CTD or STD cast1994-04-18 03:36:0049.1445 N, 12.7865 WRRS Charles Darwin CD85
887313CTD or STD cast1994-04-18 05:53:0049.16517 N, 12.768 WRRS Charles Darwin CD85
444321Currents -subsurface Eulerian1994-04-18 13:56:0049.1865 N, 12.8194 WRRS Charles Darwin CD85
444308Currents -subsurface Eulerian1994-04-18 14:04:0049.1865 N, 12.8194 WRRS Charles Darwin CD85
887325CTD or STD cast1994-04-18 21:15:0049.133 N, 12.82217 WRRS Charles Darwin CD85
974033CTD or STD cast1994-05-25 13:50:0049.194 N, 12.745 WRRS Charles Darwin CD86
1663773Water sample data1994-05-25 14:24:0049.19405 N, 12.74502 WRRS Charles Darwin CD86
444394Multiple data types -fixed platform1994-06-30 22:15:0049.1873 N, 12.8218 WRRS Charles Darwin CD86
910378CTD or STD cast1994-09-16 02:37:0049.18333 N, 12.845 WFS Meteor M30_1
442941Currents -subsurface Eulerian1994-09-16 13:10:0049.1912 N, 12.8 WFS Meteor M30_1
442928Currents -subsurface Eulerian1994-09-16 13:14:0049.1912 N, 12.8 WFS Meteor M30_1
885275CTD or STD cast1995-06-12 23:00:0049.2025 N, 12.8185 WRRS Charles Darwin CD94
915008CTD or STD cast1995-08-21 06:15:0049.1865 N, 12.8195 WRV Pelagia PE95A
915162CTD or STD cast1995-09-18 19:37:0049.18983 N, 12.74183 WRV Pelagia PE95B
886475CTD or STD cast1995-10-01 04:24:0049.19567 N, 12.811 WRRS Discovery D217
886358CTD or STD cast1995-10-05 05:00:0049.1875 N, 12.80517 WRRS Discovery D217
886371CTD or STD cast1995-10-05 11:37:0049.191 N, 12.84267 WRRS Discovery D217
1676280Water sample data1995-10-05 12:39:0049.19099 N, 12.84267 WRRS Discovery D217
886383CTD or STD cast1995-10-05 14:53:0049.1955 N, 12.85833 WRRS Discovery D217
1676292Water sample data1995-10-05 15:07:0049.19553 N, 12.85834 WRRS Discovery D217
886229CTD or STD cast1995-10-14 05:20:0049.19217 N, 12.8065 WRRS Discovery D217
1676359Water sample data1995-10-14 05:35:0049.19215 N, 12.80656 WRRS Discovery D217