Metadata Report for BODC Series Reference Number 2119868

• Metadata Summary

• Problem Reports

• Data Access Policy

• Narrative Documents

• Project Information

• Data Activity or Cruise Information

• Fixed Station Information

• BODC Quality Flags

• SeaDataNet Quality Flags

Metadata Summary

Problem Reports

No Problem Report Found in the Database

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."

Narrative Documents

Unknown semi-automated oxygen titration system

A semi-automated titration system used to measure the concentration of dissolved oxygen in water samples, where the instrument manufacturer and model is not known. Oxygen titration systems usually consist of a burette and chemical resevoir and are often based on the Winkler titration method. They can use either potentiometric, amperometric or photometric end point detection.

Currently no specifications sheet available.

Niskin Bottle

The Niskin bottle is a device used by oceanographers to collect subsurface seawater samples. It is a plastic bottle with caps and rubber seals at each end and is deployed with the caps held open, allowing free-flushing of the bottle as it moves through the water column.

Standard Niskin

The standard version of the bottle includes a plastic-coated metal spring or elastic cord running through the interior of the bottle that joins the two caps, and the caps are held open against the spring by plastic lanyards. When the bottle reaches the desired depth the lanyards are released by a pressure-actuated switch, command signal or messenger weight and the caps are forced shut and sealed, trapping the seawater sample.

Lever Action Niskin

The Lever Action Niskin Bottle differs from the standard version, in that the caps are held open during deployment by externally mounted stainless steel springs rather than an internal spring or cord. Lever Action Niskins are recommended for applications where a completely clear sample chamber is critical or for use in deep cold water.

Clean Sampling

A modified version of the standard Niskin bottle has been developed for clean sampling. This is teflon-coated and uses a latex cord to close the caps rather than a metal spring. The clean version of the Levered Action Niskin bottle is also teflon-coated and uses epoxy covered springs in place of the stainless steel springs. These bottles are specifically designed to minimise metal contamination when sampling trace metals.

Deployment

Bottles may be deployed singly clamped to a wire or in groups of up to 48 on a rosette. Standard bottles and Lever Action bottles have a capacity between 1.7 and 30 L. Reversing thermometers may be attached to a spring-loaded disk that rotates through 180° on bottle closure.

Cruise DY018 Dissolved Oxygen from CTD bottles

Originator's Protocol for Data Acquisition and Analysis

A total of 93 CTD casts were made during Discovery cruise 018 in November/December 2014. 66 casts were made using a stainless steel CTD package and 27 casts were made using a titanium package. Discrete samples were taken from four to six Niskin bottles in order to calibrate the optode of the CTDs.

Samples were drawn into borosilicate glass bottles and later analysed using whole-bottle Winkler titration to a photometric endpoint. A thiosulphate solution of about 0.1961 mol L-1 was used, standardized with a KIO3 solution of 0.1N. Major errors can be attributed to the movement of the ship, which directly affect the accuracy of the photometric method. For that reason, the titrations were done in calm weather days when possible. Oxygen concentration was calculated according to Culberson (1991) and blank according to Holley and Hydes (1993).

The CTD packages were configured as follows:

Stainless Steel CTD

Titanium CTD

References Cited

Holley S. E. and Hydes D. J. (1993). Procedures for the determination of dissolved oxygen in seawater. James rennell centre for ocean circulation, 33.

Culberson, C. H. (1991). WHP Operations and Methods. Dissolved Oxygen. College of Marine Studies. University of Delaware. Newark, U.S.A

BODC Data Processing Procedures

Data were provided in an Excel spreadsheet and archived at BODC. The file contained the water sample data from CTD bottles. Data received were loaded into the BODC database using established BODC data banking procedures. The data were loaded into BODC's database without any changes.

The originator variables were mapped to appropriate BODC parameter codes as follows:

Data Quality Report

None (BODC assessment).

Problem Report

None (BODC assessment).

Project Information

Shelf Sea Biogeochemistry (SSB) Programme Work Package 1: CaNDyFloSS

Carbon and Nutrient Dynamics and Fluxes over Shelf Systems (CaNDyFloSS) is a £2.76 million component of the Natural Environment Research Council (NERC) Shelf Sea Biogeochemistry (SSB) research programme, running from 2013 to 2017. It is jointly funded by NERC and the Department for Environment, Food and Rural Affairs (DEFRA). The aim of the research is to perform a comprehensive study of the cycling of nutrients and carbon throughout the water column over the whole north-west European shelf. This will allow the fluxes of nutrients and carbon between the shelf and the deep ocean and atmosphere to be quantified, establishing the role of the north-west European continental shelf in the global carbon cycle.

Background

Shelf seas are the primary regions of human marine resource exploitation, including both renewable and fossil fuel energy sources, recreation, trade and food production. They provide 90% of global fish catches which form an important source of food to much of the global population. They also play an important role in the ecosystem services provided by the oceans as a whole, in particular in storing carbon away from the atmosphere.

Physical and biochemical processes in shelf seas influence the removal of CO₂ from the atmosphere and the subsequent storage of carbon in the deep ocean. Biological growth draws carbon out of the water, which is then replaced by carbon in CO₂ from the atmosphere. In the shelf seas this growth is supported by terrestrial and open ocean sources of nutrients, implying intimate roles for both the terrestrial biosphere and the open ocean environment in regulating shelf sea climate services. The oceans can also be a major source or sink for other greenhouse gases, including nitrous oxide (N₂O), with the shallow shelf sea thought to play a key role.

The spatial extent of the submerged continental shelves varies greatly. The NW European shelf sea is one of the largest and hence is likely to play a significant role in marine biogeochemical cycling, alongside providing a useful model for other systems. However, even in this relatively well studied region, there is a lack of detailed understanding of the principal controls on the cycling of carbon and the major nutrient elements, nitrogen, phosphorus and silicon. Consequently it is also difficult to predict how the cycling of these elements and hence the carbon removal they support may be altered by ongoing and potential future global change. This work package aims to address these uncertainties through a comprehensive study of the cycling of the major nutrients and carbon throughout the water column over the NW European shelf sea system.

Further details are available on the SSB website.

Participants

9 different organisations are directly involved in research for SSB Work Package 1. These institutions are

• Centre for Environment, Fisheries and Aquaculture Science (Cefas)
• National Oceanography Centre (NOC)
• Plymouth Marine Laboratory (PML)
• Scottish Association for Marine Science (SAMS) / Scottish Marine Institute (SMI)
• University of Aberdeen
• University of Bangor
• University of East Anglia (UEA)
• University of Liverpool
• University of Southampton

In addition, there are third party institutions carrying out sampling work for SSB Work Package 1, but who are not involved in the programme itself. These are:

• The Agri-Food and Biosciences Institute (AFBI)
• Irish Marine Institute (MI)
• Marine Science Scotland (MSS)

Objectives

Two overarching objectives are defined for this Work Package.

• Objective 1: Estimate the size of the continental shelf carbon pump over the whole north-west European shelf.
  This will consist of two principal activities. (1) Over a 12 month period, observations of air-sea CO₂ fluxes will be made to provide a synoptic estimate of the magnitude of carbon update by the whole shelf system. (2) Concentrations of carbon (C), nitrogen (N), phosphate (P) and silicate (Si) will be estimated in water flowing on and off the shelf. These estimates will be coupled to estimates of flow and dispersion along the shelf edge, through collaboration with the NERC Fluxes across Sloping Topography of the North East Atlantic (FASTNEt) programme to allow an observational estimate of the net off-shelf transport of C, N, P and Si.

• Objective 2: Determine the relative importance of external nutrient sources and internal biogeochemical cycling in maintaining the continental shelf pump.
  Estimates of the flux of nutrients and carbon generated in Objective 1 will be used to determine the estimation of any excess of on-shelf nutrient supply, relative to that of carbon. Work Package 1 will then quantify the processes which govern internal biogeochemical cycling by measuring the uptake ratios of N, P, Si and C into phytoplankton and the element and energy balance of organic matter production by autotrophs. Potential modifications to the relative concentrations and uptake of C, N, P and Si in the thermocline and sediment food webs will also be assessed, as will the relative importance of microbial and zooplankton turnover in controlling C, N, P and Si.

Fieldwork and data collection

Data for Objective 1 will be provided using pCO₂ systems aboard third party vessels and ferry boxes, along with measurements made through the FASTNEt programme and through the Work Package 1 process cruises detailed below. The third party cruises will be undertaken by Cefas, MI, MSS, University of Bangor and AFBI, spanning the shelf seas and shelf-edges around the United Kingdom and the Republic of Ireland.

The Work Package 1 process cruises will provide data for Objective 1 and Objective 2 and are listed in the table below. The study area is the marine shelf (and shelf-edge) of the Celtic Sea. Work will be carried out on board the NERC research vessels RRS Discovery and RRS James Cook. These cruises will focus on the physics and biogeochemistry of the benthic and pelagic zones of the water column, primarily around four main sampling sites in this area.

Activities will include Conductivity Temperature and Depth (CTD) deployments, Acoustic Doppler Current Profilers (ADCP) surveys, moorings and wire-walker deployments, autonomous gliders and submersible surveys, Marine Snow Catcher particulate matter analysis, plankton net hauls and laboratory incubations with sea water samples.

Data Activity or Cruise Information

Data Activity

BODC Sample Metadata Report for DY018_CTD_164

Please note:the supplied parameters may not have been sampled from all the bottle firings described in the table above. Cross-match the Sample Reference Number above against the SAMPRFNM value in the data file to identify the relevant metadata.

Cruise

Complete Cruise Metadata Report is available here

Fixed Station Information

Fixed Station Information

Shelf Sea Biogeochemistry Fixed Station CANDYFLOSS/CCS

This station is one of two pelagic sites sampled on the Celtic Sea shelf as part of work package I of the Shelf Sea Biogeochemistry project. The station has a mean water depth 144 m at the following co-ordinates:

The position of this station relative to the other Shelf Sea Biogeochemistry sites can be seen from the figure below.

Sampling History

Mooring deployments

Related Fixed Station activities are detailed in Appendix 1

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Appendix 1: Shelf Sea Biogeochemistry Fixed Station Candyfloss/CCS

Related series for this Fixed Station are presented in the table below. Further information can be found by following the appropriate links.

If you are interested in these series, please be aware we offer a multiple file download service. Should your credentials be insufficient for automatic download, the service also offers a referral to our Enquiries Officer who may be able to negotiate access.