Metadata Report for BODC Series Reference Number 1264237

Metadata Summary

Data Description

Data Category Offshore sea floor pressure series
Instrument Type
Sea-Bird SBE 53 BPR Bottom Pressure Recorder  sea level recorders; water temperature sensor
Instrument Mounting fixed benthic node
Originating Country United Kingdom
Originator Dr Gerard McCarthy
Originating Organization National Oceanography Centre, Southampton
Processing Status banked
Project(s) RAPIDMOC

Data Identifiers

Originator's Identifier 7MAR1L7/34
BODC Series Reference 1264237

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2011-09-26 00:30
End Time (yyyy-mm-dd hh:mm) 2014-05-14 10:30
Nominal Cycle Interval 1800.0 seconds

Spatial Co-ordinates

Latitude 24.19283 N ( 24° 11.6' N )
Longitude 49.74517 W ( 49° 44.7' W )
Positional Uncertainty 0.0 to 0.01 n.miles
Minimum Sensor Depth 5225.0 m
Maximum Sensor Depth 5225.0 m
Minimum Sensor Height -3.0 m
Maximum Sensor Height -3.0 m
Sea Floor Depth 5222.0 m
Sensor Distribution Fixed common depth - All sensors are grouped effectively at the same depth which is effectively fixed for the duration of the series
Sensor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface


BODC CODE Rank Units Short Title Title
AADYAA01 1 Days Date(Loch_Day) Date (time from 00:00 01/01/1760 to 00:00 UT on day)
AAFDZZ01 1 Days Time(Day_Fract) Time (time between 00:00 UT and timestamp)
ACYCAA01 1 Dimensionless Record_No Sequence number
PRSTDR01 1 Decibars DriftCorrTotPress Pressure (measured variable) exerted by the water body plus atmosphere by fixed in-situ pressure sensor and correction for drift
PRSTPS01 1 Decibars TotPressSeaFL Pressure (measured variable) exerted by the water body plus atmosphere by fixed in-situ pressure sensor
TEMPPR01 1 Degrees Celsius Temp Temperature of the water body

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database

RAPIDMOC Data Quality Report

It should be noted that spikes register in temperature due to a software issue associated with the acquisition of reference temperature. This issue affected the SBE53's only, and is purely instrumental. Sea-Bird were able to resolve this problem, but not before some of the SBE53's were deployed. These spikes in temperature are only apparent when the variation is small. Large fluctuations in temperature mask the spikes and are therefore not seen in some of the series. The Sea-Bird SBE53 BPR Bottom Pressure Recorder #0004 was the only series to display both spikes in pressure and temperature.

It is advised that the user should treat these series with some caution when working with these data.

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."

Narrative Documents

Sea-Bird SBE 53 BPR Bottom Pressure Recorder

The SBE 53 BPR is a water level recorder that boasts extremely high resolution,accuracy and stability. It combines a digiquartz pressure sensor, precision thermometer and optional conductivity sensor.

A description and specification of the instrument can be found in the manufacturer's datasheet .

RAPIDMOC Calibration Coefficients

Instrument Serial number 0034
Deployment cruise JC064
Recovery cruise JC103

Processing Log

purge_bp_003.m: Pressure offset of 8.98 dbar NOT removed
purge_bp_003.m: Operation interval: 26-Sep-2011 00:29:59 to 14-May-2014 10:58:37
purge_bp.m: Linear interpolation with sampling rate 48 per day
Clock offset at recovery of 83 s (relative to UTC)

Exponential-linear pressure fit to be stored with data:
amplitude of exponential decay: -0.202975 db
time-constant of exponential decay: 112.400375 days
linear slope: -0.000082 db/day mean offset: 5324.310399 db

RAPIDMOC/MOCHA Sea-Bird BPR data processing document

This document outlines the procedures undertaken to process and quality assure the BPR data collected under the RAPIDMOC and MOCHA projects.

Originator's processing

The raw data are downloaded from the instrument and converted to ASCII format. All processing is performed in Matlab.


Processing steps which are undertaken include

Quality control

All variables in specified time intervals can be set to dummy values if the data are suspicious. Any data deemed as suspicious, i.e. a spike, are removed.

BODC processing

Data are received after quality checks have been made and calibrations have been applied by the originator. The data files are submitted in ASCII format as two files per instrument.

Once the submitted data files are safely archived, the data undergo reformatting and banking procedures:

Parameter mapping

The following describes the parameters contained in the originator's files and their mapping to BODC parameter codes:

Identifier Unit Definition BODC parameter code Units Unit conversion Comments
YY year Year AADYAA01 days - Combined with MM and DD to form a date and transferred
MM month Month AADYAA01 days - Combined with MM and DD to form a date and transferred
DD day Day AADYAA01 days - Combined with MM and DD to form a date and transferred
HH hour Decimal hours AAFDZZ01 days /24 Transferred
P decibars Pressure PRSTPS01 decibars - Transferred
T °C Temperature (IPTS-90) TEMPPR01 °C - Transferred
PFIT decibars Exponential-linear or pure linear trend of pressure (decibars). - - - See Parameter derivation table below

Parameter derivation

The following describes the parameters derived by BODC and their mapping to BODC parameter codes:

BODC parameter code Units File extension Identifier Definition Units Equation Comments
PRSTDR01 decibars use


Exponential-linear or pure linear trend of pressure.

P-PFIT pressure series that is de-trended and unfiltered i.e. still contains tides

Project Information

Monitoring the Meridional Overturning Circulation at 26.5N (RAPIDMOC)

Scientific Rationale

There is a northward transport of heat throughout the Atlantic, reaching a maximum of 1.3PW (25% of the global heat flux) around 24.5°N. The heat transport is a balance of the northward flux of a warm Gulf Stream, and a southward flux of cooler thermocline and cold North Atlantic Deep Water that is known as the meridional overturning circulation (MOC). As a consequence of the MOC northwest Europe enjoys a mild climate for its latitude: however abrupt rearrangement of the Atlantic Circulation has been shown in climate models and in palaeoclimate records to be responsible for a cooling of European climate of between 5-10°C. A principal objective of the RAPID programme is the development of a pre-operational prototype system that will continuously observe the strength and structure of the MOC. An initiative has been formed to fulfill this objective and consists of three interlinked projects:

The entire monitoring array system created by the three projects will be recovered and redeployed annually until 2008 under RAPID funding. From 2008 until 2014 the array will continue to be serviced annually under RAPID-WATCH funding.

The array will be focussed on three regions, the Eastern Boundary (EB), the Mid Atlantic Ridge (MAR) and the Western Boundary (WB). The geographical extent of these regions are as follows:


Baehr, J., Hirschi, J., Beismann, J.O. and Marotzke, J. (2004) Monitoring the meridional overturning circulation in the North Atlantic: A model-based array design study. Journal of Marine Research, Volume 62, No 3, pp 283-312.

Baringer, M.O'N. and Larsen, J.C. (2001) Sixteen years of Florida Current transport at 27N Geophysical Research Letters, Volume 28, No 16, pp3179-3182

Bryden, H.L., Johns, W.E. and Saunders, P.M. (2005) Deep Western Boundary Current East of Abaco: Mean structure and transport. Journal of Marine Research, Volume 63, No 1, pp 35-57.

Hirschi, J., Baehr, J., Marotzke J., Stark J., Cunningham S.A. and Beismann J.O. (2003) A monitoring design for the Atlantic meridional overturning circulation. Geophysical Research Letters, Volume 30, No 7, article number 1413 (DOI 10.1029/2002GL016776)

RAPID- Will the Atlantic Thermohaline Circulation Halt? (RAPID-WATCH)

RAPID-WATCH (2007-2014) is a continuation programme of the Natural Environment Research Council's (NERC) Rapid Climate Change (RAPID) programme. It aims to deliver a robust and scientifically credible assessment of the risk to the climate of UK and Europe arising from a rapid change in the Atlantic Meridional Overturning Circulation (MOC). The programme will also assess the need for a long-term observing system that could detect major MOC changes, narrow uncertainty in projections of future change, and possibly be the start of an 'early warning' prediction system.

The effort to design a system to continuously monitor the strength and structure of the North Atlantic MOC is being matched by comparative funding from the US National Science Foundation (NSF) for the existing collaborations started during RAPID for the observational arrays.

Scientific Objectives

This work will be carried out in collaboration with the Hadley Centre in the UK and through international partnerships.

Mooring Arrays

The RAPID-WATCH arrays are the existing 26°N MOC observing system array (RAPIDMOC) and the WAVE array that monitors the Deep Western Boundary Current. The data from these arrays will work towards meeting the first scientific objective.

The RAPIDMOC array consists of moorings focused in three geographical regions (sub-arrays) along 26.5° N: Eastern Boundary, Mid-Atlantic Ridge and Western Boundary. The Western Boundary sub-array has moorings managed by both the UK and US scientists. The other sub-arrays are solely led by the UK scientists. The lead PI is Dr Stuart Cunningham of the National Oceanography Centre, Southampton, UK.

The WAVE array consists of one line of moorings off Halifax, Nova Scotia. The line will be serviced in partnership with the Bedford Institute of Oceanography (BIO), Halifax, Canada. The lead PI is Dr Chris Hughes of the Proudman Oceanographic Laboratory, Liverpool, UK.

All arrays will be serviced (recovered and redeployed) either on an annual or biennial basis using Research Vessels from the UK, US and Canada.

Modelling Projects

The second scientific objective will be addressed through numerical modelling studies designed to answer four questions:

Data Activity or Cruise Information

Data Activity

Start Date (yyyy-mm-dd) 2011-09-22
End Date (yyyy-mm-dd) 2014-05-14
Organization Undertaking ActivityNational Oceanography Centre, Southampton
Country of OrganizationUnited Kingdom
Originator's Data Activity IdentifierMAR1L7_7
Platform Categoryfixed benthic node

RAPID Moored Instrument Rig MAR1L7_7

This rig was deployed as part of the Mid-Atlantic Ridge (MAR) array of the RAPIDMOC project.

Deployment cruise RRS James Cook cruise JC064
Recovery cruise RRS James Cook cruise JC103

The rig was anchored by a 300 kg anchor and kept erect by sub-surface floats attached along the mooring. The instruments were attached to a tripod assembly.

Instruments deployed on the rig

Depth Instrument
5225 m Sea-Bird SBE53 BPR Bottom Pressure Recorder (#0033)
5225 m Sea-Bird SBE53 BPR Bottom Pressure Recorder (#0034)

Other Series linked to this Data Activity - 1264225


Cruise Name JC064
Departure Date 2011-09-10
Arrival Date 2011-10-09
Principal Scientist(s)Stuart A Cunningham (National Oceanography Centre, Southampton)
Ship RRS James Cook

Complete Cruise Metadata Report is available here

Fixed Station Information

Fixed Station Information

Station NameMid-Atlantic Ridge Array
CategoryOffshore area
Latitude24° 45.00' N
Longitude45° 30.00' W
Water depth below MSL

RAPIDMOC Mid-Atlantic Ridge (MAR) Array

The Mid-Atlantic Ridge Array defines a box in which moorings are deployed either side of the Mid-Atlantic Ridge in the North Atlantic as part of the RAPIDMOC project. The box region has latitudinal limits of 23° N to 26.5° N and longitudinal limits of 40° W to 52.1° W. Moorings have occupied this region since 2004 and are typically deployed for 12 to 18 months.

Moored data summary

A description of the data types can be found at the bottom of this document

Year Cruise ID Number of moorings Data types (number of instruments)
2004 D277 4 BPR (4), CM (5), MCTD (20), MMP (1)
2005 CD170 6 BPR (4), CM (6), MCTD (24)
2006 D304 5 BPR (3), CM (3), MCTD (32)
2007 D324 6 BPR (4), CM (3), MCTD (33)
2008 D334 6 BPR (4), CM (3), MCTD (39)
2009 D344 6 BPR (6), CM (3), MCTD (40)
2010 D359 6 BPR (6), CM (5), MCTD (40)
2011 JC064 6 BPR (6), CM (5), MCTD (40)
2012 D382 6 BPR (6), CM (5), MCTD (34)
2014 JC103 6 BPR (6), CM (1), MCTD (34)

Cruise data summary

During the cruises to service the moored array, a variety of data types are collected. The table below is a summary of these data. The number of CTD profiles performed on these cruises within the box region defined above is also included. Trans-Atlantic hydrographic CTD sections have also been performed since 2004 and are included in the table.

Cruise ID Cruise description Data types Number of CTD profiles performed within the box region
D277 Initial array deployment DIS, MET, NAV, SADCP, SURF -
D279 Hydrographic section CTD, DIS, LADCP, MET, NAV, SADCP, SURF 19
CD170 Array service CTD, DIS, MET, NAV, SADCP, SURF 5
D304 Array service CTD, DIS, MET, NAV, SADCP, SURF 1
D324 Array service CTD, DIS, MET, NAV, SADCP, SURF 3
D334 Array service CTD, DIS, MET, NAV, SADCP, SURF 5
D344 Array service CTD, DIS, MET, NAV, SADCP, SURF 5
D346 Hydrographic section CTD, DIS, LADCP, MET, NAV, SADCP, SURF 21
D359 Array service CTD, DIS, MET, NAV, SADCP, SURF 5
JC064 Array service CTD, DIS, MET, NAV, SADCP, SURF 6
D382 Array service CTD, DIS, MET, NAV, SADCP, SURF 3
JC103 Array service CTD, DIS, MET, NAV, SADCP, SURF 4

Data type ID and description

Data type ID Description
ADCP Acoustic Doppler Current Profiler
BATH Bathymetry
BPR Bottom Pressure Recorder
CM Current Meter
CTD Conductivity-Temperature-Depth profiler
DIS Discrete water bottle samples
IES Inverted Echo Sounder
LADCP Lowered Acoustic Doppler Current Profiler
MET Meteorology
MCTD Moored Conductivity-Temperature-Depth sensor
MMP McLane Moored Profiler - profiling CTD and current meter
NAV Navigation
SADCP Shipborne Acoustic Doppler Current Profiler
SURF Sea surface data

Other Series linked to this Fixed Station for this cruise - 1112859 1112860 1112872 1112884 1112896 1112903 1134425 1134437 1134449 1134450 1134462 1134474 1134486 1134498 1134505 1134517 1134529 1134530 1134542 1134554 1134566 1134578 1134591 1134609 1134610 1134622 1134634 1134646 1134658 1134671 1134683 1134695 1134702 1134714 1134726 1134738 1134751 1134763 1134775 1134787 1134799 1264225 1264249 1264250

Other Cruises linked to this Fixed Station (with the number of series) - CD170 (33) D277 (24) D304 (31) D324 (40) D334 (32) D344 (42) D346 (21) D359 (49) D382 (35) JC103 (4)

BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain
Q value below limit of quantification