Metadata Report for BODC Series Reference Number 698799


Metadata Summary

Data Description

Data Category Hydrography time series at depth
Instrument Type
NameCategories
Sea-Bird SBE 16Plus SEACAT C-T Recorder  water temperature sensor; salinity sensor
Seapoint Turbidity Meter  optical backscatter sensors
Instrument Mounting fixed benthic node
Originating Country United Kingdom
Originator Mr John Howarth
Originating Organization Proudman Oceanographic Laboratory (now National Oceanography Centre, Liverpool)
Processing Status banked
Project(s) Coastal Observatory
 

Data Identifiers

Originator's Identifier MX04597.938
BODC Series Reference 698799
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2005-08-17 12:40
End Time (yyyy-mm-dd hh:mm) 2005-09-15 11:00
Nominal Cycle Interval 600.0 seconds
 

Spatial Co-ordinates

Latitude 53.53367 N ( 53° 32.0' N )
Longitude 3.35733 W ( 3° 21.4' W )
Positional Uncertainty 0.0 to 0.01 n.miles
Minimum Sensor Depth 21.7 m
Maximum Sensor Depth 21.7 m
Minimum Sensor Height 0.5 m
Maximum Sensor Height 0.5 m
Sea Floor Depth 22.2 m
Sensor Distribution Fixed common depth - All sensors are grouped effectively at the same depth which is effectively fixed for the duration of the series
Sensor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODE Rank Units Short Title Title
AADYAA01 1 Days Date(Loch_Day) Date (time from 00:00 01/01/1760 to 00:00 UT on day)
AAFDZZ01 1 Days Time(Day_Fract) Time (time between 00:00 UT and timestamp)
ACYCAA01 1 Dimensionless Record_No Sequence number
CNDCPR01 1 Siemens per metre InSituCond Electrical conductivity of the water body by in-situ conductivity cell
PREXPS01 1 Decibars MeasPress_SL Pressure (measured variable) exerted by the water body by fixed in-situ pressure sensor and corrected to read zero at sea level
PSALPR01 1 Dimensionless P_sal Practical salinity of the water body by conductivity cell and computation using UNESCO 1983 algorithm
TEMPPR01 1 Degrees Celsius Temp Temperature of the water body
TURBSP01 1 Nephelometric Turbidity Units Turb Turbidity of the water body by SeaPoint turbidity meter and laboratory calibration against formazin
 

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database

Originator's quality control comments for PD30_05 COBS moorings

Data supplied to BODC were accompanied by data quality notes from the Originator that detailed observations made when the data were processed and subsequent processing decisions. A summary of these notes have been provided in the tables below.

Rig#937

Instrument Serial number Instrument depth Data quality comments
Sea-Bird MicroCAT 02506 5 m Comparisons performed against CTD data found an offset of 0.1°C in temperature at deployment, however the values were good from the midway point of the series until the mooring was recovered. No adjustments were made to these data. There was an offset in the conductivity channel with a mean value of -0.006 S m-1. An offset correction of +0.006 S m-1 has been applied to the conductivity data.

Rig#938


Instrument Serial number Instrument depth Data quality comments
Sea-Bird 16+ SEACAT fitted with Seapoint Turbidity Meter 10471 04597 Located on seabed Comparisons performed against CTD data found an offset in conductivity after deployment. The Originator used the mean offset of the last three comparison points to calculate the value which was used to correct the conductivity data. This led to an offset correction of +0.0093 S m-1 being applied. Conductivity spikes at cycles 2072 and 3342 were converted to absent data values by the Data Originator.
Teledyne RDI 600 kHz ADCP 3644 Located on seabed To correct for the magnetic declination (difference between magnetic north and true north) latitude values were changed by -3.9753°. All latitude values were modified by -0.25031° to correct for the compass error.

Rig#939


Instrument Serial number Instrument depth Data quality comments
Sea-Bird MicroCAT 02081 5 m Comparisons performed against CTD data found an offset in the conductivity channel. The offset was larger at deployment and recovery. An offset correction of +0.007 S m-1 was applied to the conductivity data, which was the mean value of the offset observed in the middle of the series.

Rig#940


Instrument Serial number Instrument depth Data quality comments
Sea-Bird 16+ SEACAT fitted with Seapoint Turbidity Meter 10489 04737 Located on seabed CTD comparison checks found an offset in temperature, however as the minimum value of this offset was small at 0.009°C, No adjustments were made to the temperature channel. A consistent offset with a minimum value of -0.006 S m-1 was found in conductivity. An offset adjustment of +0.006 S m-1 has been applied to this channel.
Teledyne RDI 600 kHz ADCP 2391 Located on seabed To correct for the magnetic declination (difference between magnetic north and true north) latitude values were changed by -4.0882°. All latitude values were modified by +2.9319° to correct for the compass error.

Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."


Narrative Documents

Data Processing: NOCL Sea-Bird SBE 16plus SEACAT with Seapoint Turbidity Sensor

Data Originator's Processing

Data were downloaded by the Proudman Oceanographic Laboratory (POL) (since 01 April 2010, the National Oceanography Centre Liverpool (NOCL)) from the instrument logger, and factory calibrations were applied to the temperature and conductivity channels. The instruments are returned to the manufacturer for recalibration approximately every two years. The data were then reformatted by POL/NOCL to a standard ASCII format.

Before the data were supplied to BODC, basic quality control was performed by the Data Originator. The first stage of quality checks involved comparing the data from each instrument with CTD measurements recorded during the deployment and recovery of the mooring. Following the comparison against CTD data secondary checks were performed by comparing the data from each instrument against the data from other sensors attached to that mooring. The Originator has provided BODC with a document containing a full description of the quality control methodology . Depending on the result of the quality checks for each series, one of the following actions was performed by the Originator:

A full description of the results of these quality checks can be found in the relevant Originator's data processing comments document.

Sea-Bird SBE 16plus SEACAT

The SBE 16 plus is a high accuracy conductivity and temperature recorder (pressure optional). It is designed for moorings and other long-duration, fixed-site deployments. The SBE 16 plus has 6 amplified A/D input channels and conditioned power of 500 ma is avaliable for auxiliary sensors, dissolved oxygen, turbidity, fluorescence, PAR etc.

The SBE 16 plus is available with a choice of RS-232 or RS-485 interface.

Sensor specifications

  Temperature
(°C)
Conductivity (S m -1 ) Optional Pressure - strain Gauge Optional Pressure - Quartz
Measurement Range -5 to +35 0 to 9 0 to full scale range: 20 / 100 / 350 / 1000 / 1600 / 2000 / 3500 / 7000 metres 0 to full scale range: 20 / 60 / 130 / 200 / 270 / 680 / 1400 / 2000 / 4200 / 7000 / 10500 metres
Initial accuracy 0.005 0.0005 0.1% (RS-232)/0.04% (RS-485) of full scale range 0.02% (RS-232)/0.002% (RS-485) of full scale range
Typical Stability 0.0002 0.0003 0.05% (RS-232)/0.1% (RS-485) of full scale range 0.025% of full scale range
Resolution 0.0001 0.00005 typical 0.002% of full scale range Depends on sample integration, 0.0006% of full scale range for 1 s integration
Sensor Calibration +1 to +32 0 to 9; physical calibration over range 2.6 to 6.5 S m -1 plus zero conductivity (air) Ambient pressure to full scale range in 5 steps Ambient pressure to full scale range in 5 steps

General information

Memory 8 MB FLASH memory (RS-232); 64 MB FLASH memory (RS-485)
Data Storage Converted temperature and conductivity: 6 bytes per sample. Time: 4 bytes per sample. Pressure (optional): 5 bytes per sample
Real-Time Clock Watch-crystal type 32,768 Hz; accuracy (±1 minutes/year)
Standard Internal Batteries 9 alkaline D-cells. Provides sufficient capacity for 145,000 samples for a CTD and 5M pump
Housing Titanium pressure case rated at 7000 metres
Weight (without pressure) In water: 8.6 kg/In air: 13.7 kg

Further information can be found in the instrument manual

Seapoint Turbidity Meter

The Seapoint Turbidity Meter detects light scattered by particles suspended in water, generating an output voltage proportional to turbidity or suspended solids. Range is selected by two digital lines which can be hard wired or microprocessor controlled, thereby choosing the appropriate range and resolution for measurement of extremely clean to very turbid waters. The offset voltage is within 1 mV of zero and requires no adjustment across gains. The optical design confines the sensing volume to within 5 cm of the sensor allowing near-bottom measurements and minimizing errant reflections in restricted spaces.

Sensor specifications, current at August 2006, are given in the table below.

Sensor Specifications

Power requirements 7 - 20 VDC, 3.5 mA avg., 6 mA pk.
Output 0 - 5.0 VDC
Output Time Constant 0.1 sec.
RMS Noise> < 1 mV
Power-up transient period < 1 sec.
Light Source Wavelength 880 nm
Sensing Distance (from windows) < 5 cm (approx.)
Linearity < 2% deviation 0 - 750 FTU

  Gain Sensitivity (mV FTU -1 ) Range (FTU)
Sensitivity/Range 100x
20x
5x
1x
200
40
10
2
25
125
500
**

** output is non-linear above 750 FTU.

Further details can be found in the manufacturer's specification sheet .

Processing of Seabird 16plus SEACAT with Seapoint Turbidity Sensor data by BODC

The data were provided to BODC in ASCII format, and the series were reformatted into BODC standard internal format using a transfer function. The following table shows how the Originator's variables present in the Seapoint 16 plus data were mapped to the appropriate BODC parameter codes.

Originator's Variable Units Description BODC Parameter Code Units Comments
Temperature °C Temperature of the water column TEMPPR01 °C -
Conductivity S m -1 Electrical conductivity of the water column by in-situ conductivity cell CNDCPR01 S m -1 -
Pressure dbar Pressure exerted by the water column PREXPS01 dbar -
Turbidity FTU Turbidity of the water column by Seapoint turbidity meter and laboratory calibration against formazin TURBSP01 NTU FTU=NTU
Salinity None Practical salinity of the water column by conductivity cell and computation using UNESCO 1983 algorithm PSALPR01 None -

The reformatted data were visualised using the in-house EDSERPLO software. Suspect data were marked by adding an appropriate quality control flag, missing data by both setting the data to an appropriate value and setting the quality control flag.

General Data Screening carried out by BODC

BODC screen both the series header qualifying information and the parameter values in the data cycles themselves.

Header information is inspected for:

Documents are written by BODC highlighting irregularities which cannot be resolved.

Data cycles are inspected using time or depth series plots of all parameters. Currents are additionally inspected using vector scatter plots and time series plots of North and East velocity components. These presentations undergo intrinsic and extrinsic screening to detect infeasible values within the data cycles themselves and inconsistencies as seen when comparing characteristics of adjacent data sets displaced with respect to depth, position or time. Values suspected of being of non-oceanographic origin may be tagged with the BODC flag denoting suspect value; the data values will not be altered.

The following types of irregularity, each relying on visual detection in the plot, are amongst those which may be flagged as suspect:

If a large percentage of the data is affected by irregularities then a Problem Report will be written rather than flagging the individual suspect values. Problem Reports are also used to highlight irregularities seen in the graphical data presentations.

Inconsistencies between the characteristics of the data set and those of its neighbours are sought and, where necessary, documented. This covers inconsistencies such as the following:

This intrinsic and extrinsic screening of the parameter values seeks to confirm the qualifying information and the source laboratory's comments on the series. In screening and collating information, every care is taken to ensure that errors of BODC making are not introduced.


Project Information

Proudman Oceanographic Laboratory Coastal Observatory

The Coastal Observatory was established by Proudman Oceanographic Laboratory as a coastal zone real time observing and monitoring system. The main objective is to understand a coastal sea's response both to natural forcing and to the consequences of human activity. Near real-time measurements will be integrated with coupled models into a pre-operational coastal prediction system whose results will be displayed on the World Wide Web.

The Observatory is expected to grow and evolve as resources and technology allow, all the while building up long time series. A site selection pilot study was carried out in September 2001 and the Observatory became operational in August 2002.

The site is located in Liverpool Bay and is subject to typical coastal sea processes, with strong tides, occasional large storm surges and waves, freshwater input, stable and unstable stratification, high suspended sediment concentration and biogeochemical interaction. Measurements and monitoring will focus on the impacts of storms, variations in river discharge (especially the Mersey), seasonality and blooms in Liverpool Bay.

A variety of methods will be used to obtain measurements, including:

  1. Moored instruments for in situ time series of currents, temperature and salinity profiles, and surface waves and meteorology. It is hoped that turbidity and chlorophyll measurements will be made at another site as the Observatory progresses;
  2. The Cefas Smartbuoy for surface properties such as nutrients and chlorophyll, starting late 2002;
  3. R.V. Prince Madog to carry out spatial surveys and service moorings;
  4. Instrumented ferries for near surface temperature, salinity, turbidity, chlorophyll and nutrients. The first route will be Liverpool to Douglas, Isle of Man, starting late 2002;
  5. Drifters for surface currents and properties such as temperature and salinity, starting in 2004;
  6. Tide gauges, with sensors for meteorology, waves, temperature and salinity, where appropriate;
  7. Meteorological data from Bidston Observatory and Hilbre Island, HF radar and tide gauge sites;
  8. Shore-based HF radar measuring waves and surface currents out to a range of 50 km, starting in 2003;
  9. Satellite data, with infrared for sea surface temperature and visible for chlorophyll and suspended sediment.

The partners currently involved with the project are listed below:

A summary of Coastal Observatory cruises to date on R.V. Prince Madog is given in the table below:

Year No. of cruises Work summary
2001 1 Site selection and pilot study. 95 CTD casts.
2002 4 POL moorings deployed and serviced
Cefas Waverider and SmartBuoy deployed and serviced
103 CTD casts
2003 10 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
341 CTD/LISST casts
2004 9 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
347 CTD/LISST casts
2005 9 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
268 CTD/LISST casts
2006 11 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
508 CTD/LISST casts
2007 9 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
471 CTD/LISST casts
2008 9 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
260 CTD/LISST casts
2009 7 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
213 CTD/LISST casts
2010 8 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
268 CTD/LISST casts
2011 6 POL moorings serviced
Cefas Waverider and SmartBuoy serviced
307 CTD/LISST casts to date, ongoing

Data Activity or Cruise Information

Data Activity

Start Date (yyyy-mm-dd) 2005-08-17
End Date (yyyy-mm-dd) 2005-09-15
Organization Undertaking ActivityProudman Oceanographic Laboratory (now National Oceanography Centre, Liverpool)
Country of OrganizationUnited Kingdom
Originator's Data Activity IdentifierPOLRIG938
Platform Categoryfixed benthic node

Proudman Oceanographic Laboratory Rig#938

Deployment and Recovery

This rig was deployed as part of the Liverpool Bay Coastal Observatory during R.V. Prince Madog cruise PD30_05. Conditions during deployment were good with light winds, calm seas and sunshine. Recovery of the rig took place during R.V. Prince Madog cruise PD34_05, conditions were fair with moderate winds and rain.

Rig Position 53.534°, -3.357°
Water Depth 22.2 m
Deployed 17 August 2005 12:36 GMT
Recovered 15 September 2005 11:33 GMT
No. of Days 29

Rig Description

This rig is a bottom frame comprising of the following instruments 0.5 m above the seabed; Waves Acoustic Doppler Current Profiler (ADCP), Sea-Bird 16plus and a SonTek Acoustic Doppler Velocimeter (ADV). The frame (D1) was fitted with two Benthos releases with (72382 - Rx 10.0 kHz, Tx 11.0 kHz, enable D, release A and 71922 - Rx 11.5 kHz, Tx 11.0 kHz, enable D, release A) fizz links and a spooler with 200 m of rope for recovery of the ballast weight. The ADV sensor was damaged on recovery.


Instrument Serial Number Parameters Measured Sampling Description Comments
RDI Waves ADCP 600 kHz 3644 Horizontal current velocity components
Vertical current velocity components
Sea surface height
Mode 1: 100 pings every 10 minutes (velocity standard deviation 0.007 m s-1).
35 x 1 m bins (2.65 - 36.65 m above the bed)
Sound velocity calculated from temperature, depth and salinity of 32.
Fitted with a pressure sensor and 1 Gbyte PCMCIA memory; hourly wave recording enabled.
Sea-Bird 16plus V RS-485 1.0 4597 Temperature
Conductivity
Pressure
Turbidity
Sample interval 600 s; digiquartz integration time 40 s. Fitted to base of frame with pumped conductivity sensor underneath.
SeaPoint turbidity sensor: S/N 10471 taped to roll bar; set up for 0 - 125 FTU range.
SonTek ADV Sensor head A640
Logger G321
Horizontal current velocity components
Vertical current velocity components
Temperature
Sample rate 16 Hz; burst interval 3600 s; samples in each burst 19200; burst length 1200 s. ADV heads 1.7 m above the sea bed pointing up
These data are not currently held at BODC.

Other Series linked to this Data Activity - 1622847

Cruise

Cruise Name PD30/05
Departure Date 2005-08-17
Arrival Date 2005-08-18
Principal Scientist(s)M John Howarth (Proudman Oceanographic Laboratory)
Ship RV Prince Madog

Complete Cruise Metadata Report is available here


Fixed Station Information

Fixed Station Information

Station NameCOA
CategoryOffshore area
Latitude53° 31.51' N
Longitude3° 23.00' W
Water depth below MSL26.0 m

Liverpool Bay Coastal Observatory Mooring Site A (COA/Site 1/Site 9)

This station is the main mooring site for the Proudman Oceanographic Laboratory (POL) Liverpool Bay Coastal Observatory and was first occupied in 2002. It is also known both as Coastal Observatory Site 1 and Site 9. POL perform two main types of activities at this station: they deploy moorings; and in addition, they take CTD profiles during each site visit. The station lies within a box of mean water depth 22.5 m with the following coordinates:

Box Corner Latitude (+ve North) Longitude (+ve East)
North-west corner 53.54097 -3.42958
South-east corner 53.50945 -3.33714

The position of this station relative to the other POL Coastal Observatory sites can be seen from the figure below.

BODC image

Mooring Deployment History

2011

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, OBS, OXY 1117, 1121, 1125, 1127, 1130, 1132, January - November
SmartBuoy CTD x 2, AC-S, CT x 2, FL x 3, OBS x 2, PAR x 2, WMS, NAS, OXY, T x 2 1116, 1120, 1124 January - November

2010

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 1086, 1090, 1094, 1098, 1102, 1106, 1109 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD, T 1085, 1089, 1093, 1097, 1101, 1105, 1108, 1112 January - December

2009

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 1055, 1062, 1067, 1071, 1074, 1078, 1082 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD, T 1054, 1061, 1066, 1070, 1073, 1077, 1081 January - December

2008

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 1024, 1028, 1032, 1036, 1041, 1044, 1047, 1051 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD, T LB1_047/1023, LB1_048/1027, LB1_049/1031, LB1_050/1035, 1040, 1043, LB1_053/1050 January - December

2007

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 990, 997, 1001, 1005, 1010, 1014, 1017, 1021 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD, T LB1_039/989, LB1_040/996, LB1_041/1000, LB1_042/1004, LB1_043/1009, LB1_044/1013, LB1_045/1016, LB1_046/1020 January - December

2006

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 951, 962, 966, 970, 974, 978, 982, 986 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD 958, 961, 965, 969, 973, 977, LB1_037/981, LB1_038/985 January - December

2005

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CT 913, 914, 921, 925, 929, 933, 938, 942, 945, 949 January - December
SmartBuoy CT, FL, OBS, PAR, WMS, NAS, OXY 912, 920, 924, 928, 932, 937, LB1_028/941, LB1_029/944, LB1_030/948 January - December
Frame with telemetry buoy ADCP 914 March - April

2004

Rig Type Typical Instruments Rig IDs Comment
Frame BPR, ADCP, TR, CT 890, 892, 893, 896, 898, 900, 902, 904, 907, 908, 910, 911 January - December
SmartBuoy CT, FL, OBS, PAR, WMS, NAS 889, 891, 895, 897, 899, 901, 903, 906, 909 January - December
Frame with telemetry buoy ADCP 893, 908, 911 April - May, October - December

2003

Rig Type Instruments Rig IDs Comment
Frame BPR, ADCP, TR, CT 861, 864, 866, 869, 872, 878, 880, 883, 885, 887, 888 January - December
SmartBuoy CT, FL, OBS, PAR, WMS, NAS 863, 865, 867, 870, 871, 877, 879, 882, 884, 886 January - December

2002

Rig Type Instruments Rig IDs Comment
Frame BPR, ADCP, TR, CT 851, 854, 856, 858 August - December
Line mooring CT x 3 853, 855 August - November
SmartBuoy CT, FL, OBS, PAR, WMS, NAS 857, 860 November - December

2001

Rig Type Instruments Rig IDs Comment
Frame ADCP, OBS 838, 839, 840, 841, 843, 844, 845, 846, 848, 849 September

CTD Sampling History

Year Number of Cruises Total Casts per year
2011 6 116 including a 46 cast tidal cycle from 2011-04-18 to 2011-04-19 and a 51 cast tidal cycle station from 2011-07-27 to 2011-07-28
2010 8 71 including a 52 cast tidal cycle station from 2010-04-28 to 2010-04-29
2009 7 21
2008 9 75 including a 54 cast tidal cycle station from 2008-05-13 to 2008-05-14
2007 8 71 including a 51 cast tidal cycle station from 2007-05-15 to 2007-05-16
2006 9 72 including a 53 cast tidal cycle station from 2006-05-09 to 2006-05-10
2005 9 41 including a 22 cast tidal cycle station from 2005-04-05 to 2005-04-06
2004 9 77 including a 54 cast tidal cycle station from 2004-05-11 to 2004-05-12
2003 10 28
2002 4 13

The CTD instrument package for these cruises was a Sea-Bird 911plus, with beam transmissometer, fluorometer, LICOR PAR sensor, LISST-25, and oxygen sensor.

Key

AC-S = Absorption and attenuation spectrophotometer
ADCP = Acoustic Doppler Current Profiler
ADV = Acoustic Doppler Velocimeter
BD = Bacterial degradation experiment
BPR = Bottom Pressure Recorder
CT = Conductivity and temperature logger
CTD = Conductivity, temperature, depth sensor
FL = Fluorometer
NAS = in-situ nutrient analyser
OBS = Optical Backscatter Turbidity meter
OXY = Oxygen sensor
PAR = PAR sensor
T = Temperature logger
TR = Transmissometer
WMS = Automatic water sampler

Other Series linked to this Fixed Station for this cruise - 698972 1195038 1195051 1195063 1195075 1195087 1195099 1195106 1622847

Other Cruises linked to this Fixed Station (with the number of series) - CO 01/12 (5) PD01/08 (17) PD01/11 (14) PD02/03 (10) PD02/05 (11) PD02/07 (15) PD02/09B (17) PD02/10 (15) PD04/06 (1) PD05/10 (16) PD06/04 (12) PD06/07 (16) PD07/08 (14) PD07/11 (17) PD09/06 (11) PD09/07 (64) PD09/08 (16) PD10/03 (9) PD10/10 (14) PD11/04B (13) PD11/05 (9) PD11/11 (57) PD12/05 (2) PD12/09 (16) PD13/07 (14) PD14/08 (67) PD16/06 (9) PD16/07 (15) PD17/03 (12) PD17/10 (15) PD18/04 (13) PD18/05 (11) PD18/09 (17) PD19/08 (2) PD20/02 (7) PD20/06 (9) PD20/07 (17) PD21/05 (10) PD21/10 (15) PD21/11 (9) PD22/04 (13) PD22/06 (9) PD23/03A (10) PD23/07 (15) PD23/08 (13) PD24/02 (2) PD24/09 (17) PD25/03B (12) PD25/05 (11) PD25/06 (9) PD25/11 (7) PD27/07 (17) PD29/04 (12) PD29/06 (9) PD29/08 (14) PD29/10 (17) PD31/02 (11) PD31/03 (12) PD32/04 (12) PD33/08 (5) PD33/09 (16) PD34/03 (12) PD34/05 (10) PD35/02 (11) PD35/06 (14) PD36/10 (16) PD37/06 (14) PD37/08 (18) PD38/03 (13) PD38/04 (12) PD38/09 (16) PD41/05 (11) PD43/11 (11) PD44/03 (7) PD47/09 (15) PD48/03 (5) PD48/04 (8) PD48/05 (10) PD49/10 (14) PD52/04 (8)


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain