Metadata Report for BODC Series Reference Number 805455


Metadata Summary

Data Description

Data Category Hydrography time series at depth
Instrument Type
NameCategories
Sea-Bird SBE 16Plus SEACAT C-T Recorder  water temperature sensor; salinity sensor
Seapoint Turbidity Meter  optical backscatter sensors
Instrument Mounting fixed benthic node
Originating Country United Kingdom
Originator Mr John Howarth
Originating Organization Proudman Oceanographic Laboratory (now National Oceanography Centre, Liverpool)
Processing Status banked
Project(s) Oceans 2025
Oceans 2025 Theme 10
Oceans 2025 Theme 10 SO11
 

Data Identifiers

Originator's Identifier MX04736.1047
BODC Series Reference 805455
 

Time Co-ordinates(UT)

Start Time (yyyy-mm-dd hh:mm) 2008-10-22 16:30
End Time (yyyy-mm-dd hh:mm) 2008-12-10 14:30
Nominal Cycle Interval 600.0 seconds
 

Spatial Co-ordinates

Latitude 53.53450 N ( 53° 32.1' N )
Longitude 3.35583 W ( 3° 21.3' W )
Positional Uncertainty 0.01 to 0.05 n.miles
Minimum Sensor Depth 24.9 m
Maximum Sensor Depth 24.9 m
Minimum Sensor Height 0.5 m
Maximum Sensor Height 0.5 m
Sea Floor Depth 25.4 m
Sensor Distribution Fixed common depth - All sensors are grouped effectively at the same depth which is effectively fixed for the duration of the series
Sensor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
Sea Floor Depth Datum Instantaneous - Depth measured below water line or instantaneous water body surface
 

Parameters

BODC CODE Rank Units Short Title Title
AADYAA01 1 Days Date(Loch_Day) Date (time from 00:00 01/01/1760 to 00:00 UT on day)
AAFDZZ01 1 Days Time(Day_Fract) Time (time between 00:00 UT and timestamp)
ACYCAA01 1 Dimensionless Record_No Sequence number
CNDCPR01 1 Siemens per metre InSituCond Electrical conductivity of the water body by in-situ conductivity cell
PREXPS01 1 Decibars MeasPress_SL Pressure (measured variable) exerted by the water body by fixed in-situ pressure sensor and corrected to read zero at sea level
PSALPR01 1 Dimensionless P_sal Practical salinity of the water body by conductivity cell and computation using UNESCO 1983 algorithm
TEMPPR01 1 Degrees Celsius Temp Temperature of the water body
TURBSP01 1 Nephelometric Turbidity Units Turb Turbidity of the water body by SeaPoint turbidity meter and laboratory calibration against formazin
 

Definition of Rank

  • Rank 1 is a one-dimensional parameter
  • Rank 2 is a two-dimensional parameter
  • Rank 0 is a one-dimensional parameter describing the second dimension of a two-dimensional parameter (e.g. bin depths for moored ADCP data)

Problem Reports

No Problem Report Found in the Database


Data Access Policy

Open Data supplied by Natural Environment Research Council (NERC)

You must always use the following attribution statement to acknowledge the source of the information: "Contains data supplied by Natural Environment Research Council."


Narrative Documents

Data Processing: NOCL Sea-Bird SBE 16plus SEACAT with Seapoint Turbidity Sensor

Data Originator's Processing

Data were downloaded by the Proudman Oceanographic Laboratory (POL) (since 01 April 2010, the National Oceanography Centre Liverpool (NOCL)) from the instrument logger, and factory calibrations were applied to the temperature and conductivity channels. The instruments are returned to the manufacturer for recalibration approximately every two years. The data were then reformatted by POL/NOCL to a standard ASCII format.

Before the data were supplied to BODC, basic quality control was performed by the Data Originator. The first stage of quality checks involved comparing the data from each instrument with CTD measurements recorded during the deployment and recovery of the mooring. Following the comparison against CTD data secondary checks were performed by comparing the data from each instrument against the data from other sensors attached to that mooring. The Originator has provided BODC with a document containing a full description of the quality control methodology . Depending on the result of the quality checks for each series, one of the following actions was performed by the Originator:

A full description of the results of these quality checks can be found in the relevant Originator's data processing comments document.

Sea-Bird SBE 16plus SEACAT

The SBE 16 plus is a high accuracy conductivity and temperature recorder (pressure optional). It is designed for moorings and other long-duration, fixed-site deployments. The SBE 16 plus has 6 amplified A/D input channels and conditioned power of 500 ma is avaliable for auxiliary sensors, dissolved oxygen, turbidity, fluorescence, PAR etc.

The SBE 16 plus is available with a choice of RS-232 or RS-485 interface.

Sensor specifications

  Temperature
(°C)
Conductivity (S m -1 ) Optional Pressure - strain Gauge Optional Pressure - Quartz
Measurement Range -5 to +35 0 to 9 0 to full scale range: 20 / 100 / 350 / 1000 / 1600 / 2000 / 3500 / 7000 metres 0 to full scale range: 20 / 60 / 130 / 200 / 270 / 680 / 1400 / 2000 / 4200 / 7000 / 10500 metres
Initial accuracy 0.005 0.0005 0.1% (RS-232)/0.04% (RS-485) of full scale range 0.02% (RS-232)/0.002% (RS-485) of full scale range
Typical Stability 0.0002 0.0003 0.05% (RS-232)/0.1% (RS-485) of full scale range 0.025% of full scale range
Resolution 0.0001 0.00005 typical 0.002% of full scale range Depends on sample integration, 0.0006% of full scale range for 1 s integration
Sensor Calibration +1 to +32 0 to 9; physical calibration over range 2.6 to 6.5 S m -1 plus zero conductivity (air) Ambient pressure to full scale range in 5 steps Ambient pressure to full scale range in 5 steps

General information

Memory 8 MB FLASH memory (RS-232); 64 MB FLASH memory (RS-485)
Data Storage Converted temperature and conductivity: 6 bytes per sample. Time: 4 bytes per sample. Pressure (optional): 5 bytes per sample
Real-Time Clock Watch-crystal type 32,768 Hz; accuracy (±1 minutes/year)
Standard Internal Batteries 9 alkaline D-cells. Provides sufficient capacity for 145,000 samples for a CTD and 5M pump
Housing Titanium pressure case rated at 7000 metres
Weight (without pressure) In water: 8.6 kg/In air: 13.7 kg

Further information can be found in the instrument manual

Seapoint Turbidity Meter

The Seapoint Turbidity Meter detects light scattered by particles suspended in water, generating an output voltage proportional to turbidity or suspended solids. Range is selected by two digital lines which can be hard wired or microprocessor controlled, thereby choosing the appropriate range and resolution for measurement of extremely clean to very turbid waters. The offset voltage is within 1 mV of zero and requires no adjustment across gains. The optical design confines the sensing volume to within 5 cm of the sensor allowing near-bottom measurements and minimizing errant reflections in restricted spaces.

Sensor specifications, current at August 2006, are given in the table below.

Sensor Specifications

Power requirements 7 - 20 VDC, 3.5 mA avg., 6 mA pk.
Output 0 - 5.0 VDC
Output Time Constant 0.1 sec.
RMS Noise> < 1 mV
Power-up transient period < 1 sec.
Light Source Wavelength 880 nm
Sensing Distance (from windows) < 5 cm (approx.)
Linearity < 2% deviation 0 - 750 FTU

  Gain Sensitivity (mV FTU -1 ) Range (FTU)
Sensitivity/Range 100x
20x
5x
1x
200
40
10
2
25
125
500
**

** output is non-linear above 750 FTU.

Further details can be found in the manufacturer's specification sheet .

Processing of Seabird 16plus SEACAT with Seapoint Turbidity Sensor data by BODC

The data were provided to BODC in ASCII format, and the series were reformatted into BODC standard internal format using a transfer function. The following table shows how the Originator's variables present in the Seapoint 16 plus data were mapped to the appropriate BODC parameter codes.

Originator's Variable Units Description BODC Parameter Code Units Comments
Temperature °C Temperature of the water column TEMPPR01 °C -
Conductivity S m -1 Electrical conductivity of the water column by in-situ conductivity cell CNDCPR01 S m -1 -
Pressure dbar Pressure exerted by the water column PREXPS01 dbar -
Turbidity FTU Turbidity of the water column by Seapoint turbidity meter and laboratory calibration against formazin TURBSP01 NTU FTU=NTU
Salinity None Practical salinity of the water column by conductivity cell and computation using UNESCO 1983 algorithm PSALPR01 None -

The reformatted data were visualised using the in-house EDSERPLO software. Suspect data were marked by adding an appropriate quality control flag, missing data by both setting the data to an appropriate value and setting the quality control flag.

General Data Screening carried out by BODC

BODC screen both the series header qualifying information and the parameter values in the data cycles themselves.

Header information is inspected for:

Documents are written by BODC highlighting irregularities which cannot be resolved.

Data cycles are inspected using time or depth series plots of all parameters. Currents are additionally inspected using vector scatter plots and time series plots of North and East velocity components. These presentations undergo intrinsic and extrinsic screening to detect infeasible values within the data cycles themselves and inconsistencies as seen when comparing characteristics of adjacent data sets displaced with respect to depth, position or time. Values suspected of being of non-oceanographic origin may be tagged with the BODC flag denoting suspect value; the data values will not be altered.

The following types of irregularity, each relying on visual detection in the plot, are amongst those which may be flagged as suspect:

If a large percentage of the data is affected by irregularities then a Problem Report will be written rather than flagging the individual suspect values. Problem Reports are also used to highlight irregularities seen in the graphical data presentations.

Inconsistencies between the characteristics of the data set and those of its neighbours are sought and, where necessary, documented. This covers inconsistencies such as the following:

This intrinsic and extrinsic screening of the parameter values seeks to confirm the qualifying information and the source laboratory's comments on the series. In screening and collating information, every care is taken to ensure that errors of BODC making are not introduced.


Project Information

Oceans 2025 - The NERC Marine Centres' Strategic Research Programme 2007-2012

Who funds the programme?

The Natural Environment Research Council (NERC) funds the Oceans 2025 programme, which was originally planned in the context of NERC's 2002-2007 strategy and later realigned to NERC's subsequent strategy (Next Generation Science for Planet Earth; NERC 2007).

Who is involved in the programme?

The Oceans 2025 programme was designed by and is to be implemented through seven leading UK marine centres. The marine centres work together in coordination and are also supported by cooperation and input from government bodies, universities and other partners. The seven marine centres are:

Oceans2025 provides funding to three national marine facilities, which provide services to the wider UK marine community, in addition to the Oceans 2025 community. These facilities are:

The NERC-run Strategic Ocean Funding Initiative (SOFI) provides additional support to the programme by funding additional research projects and studentships that closely complement the Oceans 2025 programme, primarily through universities.

What is the programme about?

Oceans 2025 sets out to address some key challenges that face the UK as a result of a changing marine environment. The research funded through the programme sets out to increase understanding of the size, nature and impacts of these changes, with the aim to:

In order to address these aims there are nine science themes supported by the Oceans 2025 programme:

In the original programme proposal there was a theme on health and human impacts (Theme 7). The elements of this Theme have subsequently been included in Themes 3 and 9.

When is the programme active?

The programme started in April 2007 with funding for 5 years.

Brief summary of the programme fieldwork/data

Programme fieldwork and data collection are to be achieved through:

The data is to be fed into models for validation and future projections. Greater detail can be found in the Theme documents.


Oceans 2025 Theme 10

Oceans 2025 is a strategic marine science programme, bringing marine researchers together to increase people's knowledge of the marine environment so that they are better able to protect it for future generations.

Theme 10: Integration of Sustained Observations in the Marine Environment spans all marine domains from the sea-shore to the global ocean, providing data and knowledge on a wide range of ecosystem properties and processes (from ocean circulation to biodiversity) that are critical to understanding Earth system behaviour and identifying change. They have been developed not merely to provide long-term data sets, but to capture extreme or episodic events, and play a key role in the initialisation and validation of models. Many of these SOs will be integrated into the newly developing UK Marine Monitoring Strategy - evolving from the Defra reports Safeguarding our Seas (2002) and Charting Progress (2005), thus contributing to the underpinning knowledge for national marine stewardship. They will also contribute to the UK GOOS Strategic Plan (IACMST, 2006) and the Global Marine Assessment.

Weblink: http://www.oceans2025.org/


Oceans 2025 Theme 10, Sustained Observation Activity 11: Liverpool Bay and Irish Sea Coastal Observatory

Sustained, systematic observations of the ocean and continental shelf seas at appropriate time and space scales allied to numerical models are key to understanding and prediction. In shelf seas these observations address issues as fundamental as 'what is the capacity of shelf seas to absorb change?' encompassing the impacts of climate change, biological productivity and diversity, sustainable management, pollution and public health, safety at sea and extreme events. Advancing understanding of coastal processes to use and manage these resources better is challenging; important controlling processes occur over a broad range of spatial and temporal scales which cannot be simultaneously studied solely with satellite or ship-based platforms.

Considerable effort has been spent by the Proudman Oceangraphic Laboratory (POL) in the years 2001 - 2006 in setting up an integrated observational and now-cast modelling system in Liverpool Bay (see Figure), with the recent POL review stating the observatory was seen as a leader in its field and a unique 'selling' point of the laboratory. Cost benefit analysis (IACMST, 2004) shows that benefits really start to accrue after 10 years. In 2007 - 2012 exploitation of (i) the time series being acquired, (ii) the model-data synthesis and (iii) the increasingly available quantities of real-time data (e.g. river flows) can be carried out through Sustained Observation Activity (SO) 11, to provide an integrated assessment and short term forecasts of the coastal ocean state.

BODC image

Overall Aims and Purpose of SO 11

Measurement and Modelling Activities

More detailed information on this Work Package is available at pages 32 - 35 of the official Oceans 2025 Theme 10 document: Oceans 2025 Theme 10

Weblink: http://www.oceans2025.org/

References:

IACMST., 2004. The Economics of Sustained Marine Measurements. IACMST Information Document, N0.11, Southampton: IACMST, 96 pp


Data Activity or Cruise Information

Data Activity

Start Date (yyyy-mm-dd) 2008-10-22
End Date (yyyy-mm-dd) 2008-12-10
Organization Undertaking ActivityProudman Oceanographic Laboratory (now National Oceanography Centre, Liverpool)
Country of OrganizationUnited Kingdom
Originator's Data Activity IdentifierPOLRIG1047
Platform Categoryfixed benthic node

Proudman Oceanographic Laboratory Rig#1047

Deployment and Recovery

This rig was deployed as part of the Liverpool Bay Coastal Observatory during R.V. Prince Madog cruise PD33_08. Due to poor weather conditions, many of the cruise objectives were not met. Recovery of the rig took place during R.V. Prince Madog cruise PD37_08.

Rig Position 53° 32.068' N 3° 21.351' W
Water Depth 25.4 m
Deployed 22 October 2008 16:32 GMT
Recovered 10 December 2008 14:39 GMT
No. of days 50

Rig Description

This rig is a bottom frame comprising of the following instruments 0.5 m above the seabed: RDI Acoustic Doppler Current Profiler (ADCP); Sea-Bird 16plus; an additional Sea-Bird 16plus providing logging and power for an Aanderaa oxygen optode; and a SonTek ADV (Acoustic Doppler Velocimeter).The frame was fitted with a fizz link, a spooler with 50 m of rope for recovery of the ballast weight and two Benthos releases s/n 70356 (Rx 10.5 kHz, Tx 12.0 kHz, release D) and s/n 71909 (Rx 10.0 kHz, Tx 12.0 kHz, release C).


Instrument Serial Number Parameters Measured Sampling Description Comments
RDI 600 kHz Waves ADCP 5807 Horizontal current velocity components
Vertical current velocity components
Heading
Pitch
Roll
Temperature
Pressure
Mode 1: 100 pings every 10 minutes
(velocity standard deviation 0.007 m s-1).
35 x 1 m bins (2.65 - 36.65 m above the bed).
Beam co-ordinates - speeds, correlation, echo intensity, % good.
Sound velocity calculated from temperature, depth and salinity of 32.
Clock reset at 15:39 GMT on 21 October 2008; Logging set to start at 06:00 GMT on 22 October 2008.
Sea-Bird 16plus
V RS-485 1.0
4736 Temperature
Conductivity
Pressure
Turbidity
Sample interval 600 s; digiquartz integration time 40 s, range 400; pump 0.5 s, 1 s delay. Fitted to base of frame with pumped conductivity sensor underneath.
SeaPoint turbidity sensor (s/n 10471) taped to roll bar; set up for 0 to 125 FTU range.
Clock reset at 18:22 GMT on 20 October 2008; logging set to start at 12:00 GMT on 21 October 2008.
Sea-Bird 16plus
V RS-232 1.7
4490 Temperature
Conductivity
Oxygen concentration
Internal temperature of optode
Sample interval 600 s; digiquartz integration time 40 s, range 400; pump 0.5 s, 1 s delay. Fitted to base of frame to provide power and logging for Aanderaa optode (s/n 674).
Clock reset at 18:25 GMT on 20 October 2008; logging set to start at 12:00 GMT on 21 October 2008.
SonTek ADV (Acoustic Doppler Velocimeter) ADV Logger G527; head A983. Current velocity and direction at a small sampling volume at a fixed (10 cm) distance from probe, using 3D Doppler techniques. Sample rate 16 Hz; burst interval 3600 s; samples in each burst 19200; burst length 1200 s. Distance from center of three prong head on ADV transmitter to deck was 1.31 m (i.e. above sea bed). Red prong aligned to ADCP beam 3.
Time reset to 15:45 GMT on 21 October 2008; logging set to start at 06:00 GMT on 22 October 2008.

Other Series linked to this Data Activity - 808730 1623887

Cruise

Cruise Name PD33/08
Departure Date 2008-10-22
Arrival Date 2008-10-23
Principal Scientist(s)Matthew R Palmer (Proudman Oceanographic Laboratory)
Ship RV Prince Madog

Complete Cruise Metadata Report is available here


Fixed Station Information

Fixed Station Information

Station NameCOA
CategoryOffshore area
Latitude53° 31.51' N
Longitude3° 23.00' W
Water depth below MSL26.0 m

Liverpool Bay Coastal Observatory Mooring Site A (COA/Site 1/Site 9)

This station is the main mooring site for the Proudman Oceanographic Laboratory (POL) Liverpool Bay Coastal Observatory and was first occupied in 2002. It is also known both as Coastal Observatory Site 1 and Site 9. POL perform two main types of activities at this station: they deploy moorings; and in addition, they take CTD profiles during each site visit. The station lies within a box of mean water depth 22.5 m with the following coordinates:

Box Corner Latitude (+ve North) Longitude (+ve East)
North-west corner 53.54097 -3.42958
South-east corner 53.50945 -3.33714

The position of this station relative to the other POL Coastal Observatory sites can be seen from the figure below.

BODC image

Mooring Deployment History

2011

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, OBS, OXY 1117, 1121, 1125, 1127, 1130, 1132, January - November
SmartBuoy CTD x 2, AC-S, CT x 2, FL x 3, OBS x 2, PAR x 2, WMS, NAS, OXY, T x 2 1116, 1120, 1124 January - November

2010

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 1086, 1090, 1094, 1098, 1102, 1106, 1109 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD, T 1085, 1089, 1093, 1097, 1101, 1105, 1108, 1112 January - December

2009

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 1055, 1062, 1067, 1071, 1074, 1078, 1082 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD, T 1054, 1061, 1066, 1070, 1073, 1077, 1081 January - December

2008

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 1024, 1028, 1032, 1036, 1041, 1044, 1047, 1051 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD, T LB1_047/1023, LB1_048/1027, LB1_049/1031, LB1_050/1035, 1040, 1043, LB1_053/1050 January - December

2007

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 990, 997, 1001, 1005, 1010, 1014, 1017, 1021 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD, T LB1_039/989, LB1_040/996, LB1_041/1000, LB1_042/1004, LB1_043/1009, LB1_044/1013, LB1_045/1016, LB1_046/1020 January - December

2006

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CTD, ADV, OBS 951, 962, 966, 970, 974, 978, 982, 986 January - December
SmartBuoy CT x 2, FL x 2, OBS, PAR x 2, WMS, NAS, CTD, OXY, BD 958, 961, 965, 969, 973, 977, LB1_037/981, LB1_038/985 January - December

2005

Rig Type Typical Instruments Rig IDs Comment
Frame ADCP, CT 913, 914, 921, 925, 929, 933, 938, 942, 945, 949 January - December
SmartBuoy CT, FL, OBS, PAR, WMS, NAS, OXY 912, 920, 924, 928, 932, 937, LB1_028/941, LB1_029/944, LB1_030/948 January - December
Frame with telemetry buoy ADCP 914 March - April

2004

Rig Type Typical Instruments Rig IDs Comment
Frame BPR, ADCP, TR, CT 890, 892, 893, 896, 898, 900, 902, 904, 907, 908, 910, 911 January - December
SmartBuoy CT, FL, OBS, PAR, WMS, NAS 889, 891, 895, 897, 899, 901, 903, 906, 909 January - December
Frame with telemetry buoy ADCP 893, 908, 911 April - May, October - December

2003

Rig Type Instruments Rig IDs Comment
Frame BPR, ADCP, TR, CT 861, 864, 866, 869, 872, 878, 880, 883, 885, 887, 888 January - December
SmartBuoy CT, FL, OBS, PAR, WMS, NAS 863, 865, 867, 870, 871, 877, 879, 882, 884, 886 January - December

2002

Rig Type Instruments Rig IDs Comment
Frame BPR, ADCP, TR, CT 851, 854, 856, 858 August - December
Line mooring CT x 3 853, 855 August - November
SmartBuoy CT, FL, OBS, PAR, WMS, NAS 857, 860 November - December

2001

Rig Type Instruments Rig IDs Comment
Frame ADCP, OBS 838, 839, 840, 841, 843, 844, 845, 846, 848, 849 September

CTD Sampling History

Year Number of Cruises Total Casts per year
2011 6 116 including a 46 cast tidal cycle from 2011-04-18 to 2011-04-19 and a 51 cast tidal cycle station from 2011-07-27 to 2011-07-28
2010 8 71 including a 52 cast tidal cycle station from 2010-04-28 to 2010-04-29
2009 7 21
2008 9 75 including a 54 cast tidal cycle station from 2008-05-13 to 2008-05-14
2007 8 71 including a 51 cast tidal cycle station from 2007-05-15 to 2007-05-16
2006 9 72 including a 53 cast tidal cycle station from 2006-05-09 to 2006-05-10
2005 9 41 including a 22 cast tidal cycle station from 2005-04-05 to 2005-04-06
2004 9 77 including a 54 cast tidal cycle station from 2004-05-11 to 2004-05-12
2003 10 28
2002 4 13

The CTD instrument package for these cruises was a Sea-Bird 911plus, with beam transmissometer, fluorometer, LICOR PAR sensor, LISST-25, and oxygen sensor.

Key

AC-S = Absorption and attenuation spectrophotometer
ADCP = Acoustic Doppler Current Profiler
ADV = Acoustic Doppler Velocimeter
BD = Bacterial degradation experiment
BPR = Bottom Pressure Recorder
CT = Conductivity and temperature logger
CTD = Conductivity, temperature, depth sensor
FL = Fluorometer
NAS = in-situ nutrient analyser
OBS = Optical Backscatter Turbidity meter
OXY = Oxygen sensor
PAR = PAR sensor
T = Temperature logger
TR = Transmissometer
WMS = Automatic water sampler

Other Series linked to this Fixed Station for this cruise - 808730 949668 949681 1623887

Other Cruises linked to this Fixed Station (with the number of series) - CO 01/12 (5) PD01/08 (17) PD01/11 (14) PD02/03 (10) PD02/05 (11) PD02/07 (15) PD02/09B (17) PD02/10 (15) PD04/06 (1) PD05/10 (16) PD06/04 (12) PD06/07 (16) PD07/08 (14) PD07/11 (17) PD09/06 (11) PD09/07 (64) PD09/08 (16) PD10/03 (9) PD10/10 (14) PD11/04B (13) PD11/05 (9) PD11/11 (57) PD12/05 (2) PD12/09 (16) PD13/07 (14) PD14/08 (67) PD16/06 (9) PD16/07 (15) PD17/03 (12) PD17/10 (15) PD18/04 (13) PD18/05 (11) PD18/09 (17) PD19/08 (2) PD20/02 (7) PD20/06 (9) PD20/07 (17) PD21/05 (10) PD21/10 (15) PD21/11 (9) PD22/04 (13) PD22/06 (9) PD23/03A (10) PD23/07 (15) PD23/08 (13) PD24/02 (2) PD24/09 (17) PD25/03B (12) PD25/05 (11) PD25/06 (9) PD25/11 (7) PD27/07 (17) PD29/04 (12) PD29/06 (9) PD29/08 (14) PD29/10 (17) PD30/05 (10) PD31/02 (11) PD31/03 (12) PD32/04 (12) PD33/09 (16) PD34/03 (12) PD34/05 (10) PD35/02 (11) PD35/06 (14) PD36/10 (16) PD37/06 (14) PD37/08 (18) PD38/03 (13) PD38/04 (12) PD38/09 (16) PD41/05 (11) PD43/11 (11) PD44/03 (7) PD47/09 (15) PD48/03 (5) PD48/04 (8) PD48/05 (10) PD49/10 (14) PD52/04 (8)


BODC Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
Blank Unqualified
< Below detection limit
> In excess of quoted value
A Taxonomic flag for affinis (aff.)
B Beginning of CTD Down/Up Cast
C Taxonomic flag for confer (cf.)
D Thermometric depth
E End of CTD Down/Up Cast
G Non-taxonomic biological characteristic uncertainty
H Extrapolated value
I Taxonomic flag for single species (sp.)
K Improbable value - unknown quality control source
L Improbable value - originator's quality control
M Improbable value - BODC quality control
N Null value
O Improbable value - user quality control
P Trace/calm
Q Indeterminate
R Replacement value
S Estimated value
T Interpolated value
U Uncalibrated
W Control value
X Excessive difference

SeaDataNet Quality Control Flags

The following single character qualifying flags may be associated with one or more individual parameters with a data cycle:

Flag Description
0 no quality control
1 good value
2 probably good value
3 probably bad value
4 bad value
5 changed value
6 value below detection
7 value in excess
8 interpolated value
9 missing value
A value phenomenon uncertain